Content | The bumper strobe is the most compact strobe effect available. With only a diameter of 80mm and 35 white LEDs this effect gives flashing excitement to your party. It can be set manual and sound controlled.
The Showtec Bumper range consists 5 compact bright light effects. They all are plug and play and brings the party at home without the need of any technical settings or controllers. With the bumper series you have all effects you need to create the real club feeling, the strobe, the waves, the mushroom, the flower and the Stars. They are all including an IR remote to get in control of Color, Strobe functionality and Sound or Auto mode to set the right ambiance for your gig.
Specifications
Power supply: 12V DC Adapter incl.
Power consumption: 5 Watt
LED system: 35x 5mm White LEDs
Control: IR Remote
Operation mode: Auto, Sound
Dimensions: Ø 80 x 70mm
Weight: 0,3Kg
• 35x LEDs
• Plug and Play
• Including IR Remote
• Manual and Sound control
|
- Strobe, Blinder and Wash Light all in one
- 132 white SMD LEDs
- 1 to 30 flashes/sec adjustable
- DMX, Sound- and manual control
- Master, Slave and Standalone operation
- Rugged metal housing with universal mounting bracket
- Low power consumption
The Thunder Wash 100 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 W comes with 3-pin XLR sockets for DMX input and output, 4 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Type
Strobe / Blinder / Washer
Colour spectrum
white
Number of LEDs
132
LED type
0.2 W
Dispersion
80 °
Refresh rate
1 - 30 Hz
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 2-channel , 3-channel 1 , 3-channel 2
DMX Functions
Dimmer , Flash rate
Standalone modes
Dimmer Mode , Flash rate , slave mode , sound control
Controls
mode , Value Down , Value Up
Indicators
LED Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
30 W
Power connector
IEC power connector male
Housing material
metal
Cabinet colour
black
Dimensions without mounting bracket
Width
310 mm
Height
70 mm
Depth
70 mm
Weight
1,4 kg
|
- 3000 W flash tube already installed
- Elaborate reflector system
- Strobe effect; Blinder effect
- The device is cooled by cooling fan
- Control via stand-alone; DMX
- With Mounting bracket
- LCD display
- Dimmer electronic; effect speed adjustable; pulse effect adjustable
- Preprogrammed in LED PC-Control 512; Light Captain
- For application areas such as: Clubs/dancing school; Stage; Rental
- Very quiet working noise
- Application possibility: Suspended; on stand
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
Max. 4500 W |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Fixed Supply cord with open wires |
Cable construction: |
H07RN-F |
Cable length: |
Approx. 0,6 m |
Fuse: |
10 x 38 mm, 32 A Fuse replaceable |
Flash rate: |
0 - 20 Hz |
Color generation: |
Cold white (CW) |
DMX channels: |
1; 3; 4 |
DMX input: |
1 x 3-pin XLR (M) mounting version
1 x 5-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version
1 x 5-pin XLR (F) mounting version |
Cooling: |
1 x cooling fan |
Control: |
Stand-alone; DMX |
Preprogrammed in: |
LED PC-Control 512; Light Captain |
Attachment system: |
Mounting bracket |
Display type: |
LCD display |
Material: |
Metal; aluminum |
Dimensions: |
Width: 50 cm
Depth: 16 cm
Height: 27,5 cm |
Weight: |
6,35 kg |
Noise classification: |
Class 1 (very slight noise, suitable for noise-sensitive environments) |
Illuminant |
Nominal wattage: |
3000 W |
Base: |
3 x Wires |
Lamp type: |
Gas discharge lamp |
Energy efficiency class (A - G): |
G |
Mounting bracket |
Diameter mounting holes: |
5 x Ø13mm |
Material: |
Metal, 5 mm |
| • IP-54 Die cast housing
• Powercon True1 in- and outputs
• 28.000 Lumens
• DMX & RDM Protocol
The XPLO-15 is a professional strobe from the Showtec Infinity range. It is designed for the most high demanding light designers and rental companies. But it's not only the powerful output that takes this strobe to a new level of quality. Every detail of the XPLO-15 is thought over to make this strobe the perfect choice for professionals. It runs on DMX and RDM protocol, the die cast housing is IP-54 rated and equipped with Neutrik Powercon True1 in- and outputs. The menu based on a color display will always be in the correct position due to its built-in gravity sensor. However it's a rugged and heavy duty housing the bracket keeps the unit in the correct position at all times. This heavy duty bracket is also very easy to fix with just one handling. The XPLO-15 has 4 dimming curves and separate strobe intensity, duration and rate parameters. Eight unique zones of control allow ultimate flexibility while unique built-in chases aid in creativity and simplicity. With over 28,000 lumens of output, the XPLO-15 rivals conventional strobes and retains dynamic looks whether washing a stage or pointing directly at an audience.
Specifications
Light Source
LED System: 576 x 6500K Luxeon SMD
Drive Current: 560mA
Output: 28.000 lumen
Electrical
Power Supply: 100-240 VAC, 50/60Hz
Power Consumption: 155W Max
Control
Control Mode: DMX512 or RDM
DMX channels: 1,3,4,6,28
Optical system
Dimmer: 0-100%
Strobe: 0.5 – 30Hz
Beam Angle: 115 degrees
Dimming curves: Linear, PL-Curve, S-Curve, Square-Curve
Physical
Dimensions: 390 x 150 x 60 mm
Weight: 5,4 kg
Housing: Die Cast Aluminum
Color: Black, powder coated
Power Connectors: Neutrik Powercon True1 in-& output
Data Connectors: Neutrik XLR 3pole
Cooling: Convection
Safety
Operation temperature: -20~40°C
Protection: IP-54
| This basic strobe effect is perfectly suited for your private party room.
Thanks to the mounting bracket, it can easily be mounted to a wall or ceiling.
The flash frequency can be adjusted from 1-10 flashes per second using the rotary control.
Simple, compact strobe
- Small strobe effect with high output
- High-quality strobe flash tube
- Flash rate adjustable
- Lightweight plastic housing
- Control via stand-alone
- Strobe effect
- With a beam angle of 60°
- Very high color rendering index (CRI)
- With Mounting bracket
- For application areas such as: Party room; Decoration
Package contents
- 1 x device, 1 x mounting bracket, 1 x user manual
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
25 W |
IP classification: |
IP20 |
Protection class: |
Protection class II |
Power connection: |
Fixed power supply cord with Euro plug |
Cable length: |
Approx. 0,9 m |
Lamp type: |
Gas discharge lamp |
Color of light: |
Cold white CW >5000 K |
Flash rate: |
1 - 10 Hz |
Control: |
Stand-alone |
Beam angle: |
60° |
Beam angle (1/2 peak): |
60° |
Color rendering index (CRI): |
97 Ra |
Construction: |
Tube |
Wavelength: |
460 nm |
Attachment system: |
Mounting bracket |
Dimensions: |
Length: 13,7 cm
Width: 9,5 cm
Height: 8,8 cm |
Weight: |
200 g |
Mounting bracket |
Diameter mounting holes: |
1 x Ø5mm |
Material: |
Plastic, 3 mm |
|
STROBE DMX (2 καναλιών) 1500W με Circuit Breaker 16A. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.