Content |
The Showtec RP-405 MKII is a switch pack with built in relays and is very suitable to switch your LED lighteffects. As common switchpacks are not suitable to switch the low power of LED's, this RP-405 MKII is the right solution.
It brings 4 channels of each 5 Amp and each channel is patchable.
It can be controlled by DMX or by sound according to the built in patterns.
The speed of the patterns is adjustable between 20 seconds up to 2 minutes per step which makes this relay-pack very suitable for small venues because there is no need for an external controller.
Specifications Powerinput: AC 220V~240V / 50Hz
Power Consumption @ Full Load: 3450W
Power output: 5A each channel / 15A Max Total
Operation: build-in programs, auto run, slave, sound, DMX
DMX channels: 1, 2, 4 CH
Patchable per channel
Working environment: 0°C~40°C
Fixture Connection: XLR (3-pin) DMX in/out
Dimensions: 210 x 72 x 260 mm (LxWxH)
Weight: 2,84 kg
| Specifications: DMX controller
Input voltage: DC12~24V
Max output current: 8A (each channel)
Max output power: 288W~ 576W
Output: 3CH
Connection mode: Common Anode(+)
Material: Metal
Product size: 16.5 * 6.5 * 4cm/ 6.5 * 2.6 * 1.6in
Product weight: 310g/ 10.9oz
Package size: 18 * 7.7 * 5cm/ 7.1 * 3.0 * 2.0in
Package weight: 400g/ 14.1oz
Package list:
1 * DMX512 Decoder
Applications: Neccessary conversions of DMX to PWM signals for driving LEDs
Function: Control 3 channel 12VDC LED products or any one RGB LED Light Bar or Strip using DMX console or standalone mode with onboard DIP switches
Operating Voltage: 12~24 Volts DC (use only 12VDC power with 12VDC LEDs)
Connection Mode: Common Anode (+)
Output: Three CMOS output RGB
Maximum Load Current: 8 Amps/channel (12 Amps total)
Output Power: 144 Watts
Overall Size: (L)166 X (W)67 X (H)41 mm
Control Method: DMX512 RJ45 / DMX512 3-pin XLR / Standalone DIP switches
Standalone Modes: 9 total (7 static and 2 dynamic) see desc. below
Operating Temperature: -25~60°C |
A 54 NEW
4-κάναλο Chaser (τρεχαντήρι) 1,5A το κάθε κανάλι, επιλογέας προγράματος, αυτόνομο
με εσωτερικό μικρόφωνο δυνατότητα επιλογής Chase ή Audio, Speed Control, 4 έξοδοι
τροφοδοσίας φωτιστικών με IEC.
| Showtec Single DP-1 1 Channel DMX Dimming/Switch Pack
One channel DMX Dimming/Switch Pack
• 512 DMX-channels
• Wall / Truss mounting
• 50 mm dimming slider
• Dim and switch
• Dimming pre-set
• Dimming limit
• Capacitive load 10A, Inductive load 5A.
Specifications Voltage: AC 230V-50 Hz (CE)
Channel-Output: 10A max.
DMX-Output: 3-pin XLR socket
(female)
DMX-Input: 3-pin XLR socket (male)
Fuse: F 10A 250V 5 x 20 mm
Dimensions: 195 x 105 x 90 mm (LxWxH)
Weight: 1,26 kg
|
The DIM-4 is a compact but powerful dimming pack. It has 4 channels which each can be loaded up to 3A Each. With a total power consumption of 8A this dimming pack can fit any socket. The DIM-4 can be fully controlled by DMX but has as well an built in chaser as well a sound-control function. Furthermore the DIM-4 set can be set in a 1-channel, 2-channel or 4-channel mode.
- Music-controlled
- Schuko Outlets
- DMX-512 4CH. Dimmer pack
- 16 built-in programs
- Stand-alone function
Specifications
Input voltage: 230V/50Hz Channel Output: 3A / CH., Total 8A Control: DMX-512, Stand-alone, Music control DMX channels: 1,2 or 4 Mode: Dim or Switch Data in/out: 3 pole XLR Powerconnection: Shuko plug Poweroutput: Schuko chassis per channel Monitor: Control LED per channel, DMX signal led Dimensions: 220 x 82 x 275 mm (LxWxH) Weight: 3,5 kg
|
Control principle |
Leading edge phase control |
|
Control protocol |
DMX512 |
|
Input connections |
Signal input |
XLR chassis plug, 3-pin |
Output connections |
Signal output |
XLR chassis socket, 3-pin |
Channel fuse |
4 × 5 mm × 20 mm, 6,3 A, 250 V, fast-acting |
|
Operating supply voltage |
230 V 50 Hz |
|
Protection class |
IP20 |
|
Διαστάσεις (W × H × D) |
260 mm × 210 mm × 53 mm |
|
Βάρος |
2.6 kg |
|
Συνθήκες περιβάλλοντος |
Εύρος θερμοκρασίας
Σχετική υγρασία |
0 °C…40 °C
50 %, non-condensing |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.