| Content |
• DMX Booster with RDM communication
• Every RDM output features and independent driver
• 19" rackmountable
The DB-6i is a 6 channel DMX distributor. It offers full RDM functionality and can be used both with standard DMX and RDM protocols. Due to the RJ45 connections, this booster is perfectly suitable for permanent installations.
Specifications Power Input: AC 230V 50Hz
Power consumption: 5W
Housing: Metal with powder finishing
Data in/out: 3-Pin Neutrik XLR Connector + RJ45 data connector
Communication: DMX ore DMX+RDM (switchable)
Protocols: RDM, DMX-512 (1990)
Dimensions : 482 x 145 x 44 mm
Weight: 2 kg
|
Work C 72 DMX
CD 72 DMX is a DMX to Analog signal converter suitable for 72 analog channels.
It converts DMX and MIDI signals into analog signals. It allows using an analog dimmer with DMX consoles, setting parameters like DMX start address channel, MIDI note selection, etc.
It also works as a chaser with adjustable speed to record and program scenes from a DMX console. With its Hold function, it provides memory against current failures that maintain the last DMX configuration.
C 72 DMX sends analog signals through SUB-25 connectors. Their input voltage can be set (from DC +10V, DC +15V or DC +20V) with DIP switches. Polarity can be switched too.
DMX to analog signal converter.
Adjustable voltage level for outputs (DC 10, 15, 20 V).
Voltage polarity selector.
72 channel chaser operating mode.
Programmable DMX start address channel.
Programmable chase speed.
Memory against current failures.
Main supply: 230 V AC 50 Hz.
Dimensions (WxHxD): 483 x 44 x 120 mm.
Weight: 2.3 kg.
| The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
|
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord
|
- USB interface with 512 DMX channels in live mode
- Integrated flash memory for 256 DMX channels in stand-alone mode
- User-friendly, intuitive Cameo DMX software "by Daslight” for Windows and Max OS X available to download free
- Internet connection required for hardware registration and software activation
- Standalone mode upgradable to 512 DMX channels
- Over 15,000 device libraries and a built-in ScanLibrary editor for creating and editing your own device profiles
- Powerful XEEL engine for hundreds of impressive pixel and video effects and movements for moving heads and scanners
- Touchscreen control plus remote control of essential features via iOS and Android smartphones and tablets or MIDI controller
- Audio analyser and MIDI clock for synchronising lightshow and music speed
- Real-time programming and 3D visualisation of lightshow
- Compatible with Light Raider app on Android devices via USB (free 30-day trial version available for download)
DMX-compatible light units can be conveniently operated via PC and Mac with the Cameo DVC Interface and associated Cameo software powered by Daslight. Used in live mode, the plug-and-play interface provides 512 DMX channels. When used in standalone mode without a computer it offers 256 channels and programmed lightshows can be copied to the integrated Flash memory. The interface features a mini USB port for input, a 3-channel DMX output and is supplied with power via a computer’s USB output. Three buttons facilitate programme selection and dimming in standalone mode. This requires a standard retail 5 V USB power adapter.
The free Cameo software package contains over 15,000 device libraries and a ScanLibrary editor for creating and editing your own device profiles. Individual DMX devices can be selected, placed in groups and added to a 2D view of the lightshow. Dynamic scenes can be created, arranged and placed over each other. The palette feature facilitates light control without fader movements, and the XEEL engine creates hundreds of wide-ranging, exciting effects.
The software includes a comprehensive toolbox for live editing, an audio analyser, a MIDI clock for synchronising light and music speed, and 3D visualisation of the programmed lightshow in real time. The screen layout is fully customisable to individual needs and the free Easy Remote app facilitates remote control by iPhone, iPad and Android devices via Wi-Fi.
After successful registration at https://store.dmxsoft.com/, hardware and software upgrades (fees may apply) are available. These include upgrades for the standalone and live channels, as well as temporary and unlimited licences from Light Rider, and much more.
The DVC interface and free software have been specially developed for Cameo by Daslight. Please refer technical queries to SUPPORT@DASLIGHT.COM.
Product type
USB to DMX Interface
Live channels
512
Stand Alone channels
256 (upgradeable to 512)
Software Mode
full Cameo D4 / full Daslight D4
Inputs
Mini USB
Outputs
XLR 3-pin female
Memory
64 K
Dry contact ports
8
Operating voltage
5 V USB bus powered
Width
78 mm
Height
27 mm
Depth
88 mm
Accessories (included)
USB to Mini USB cable
Weight
0,193 kg
|
| Τροφοδοσία ρεύματος: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
| Κατανάλωση ενέργειας: |
1 W |
| Σύνδεση ρεύματος: |
Είσοδος δικτύου μέσω βιδωτού βύσματος 4 ακίδων (M) έκδοση τοποθέτησης καλώδιο τροφοδοσίας με μετασχηματιστή εναλλασσόμενου ρεύματος (παρέχεται) |
| DMX είσοδος: |
2 x 3-pin XLR (M) mounting version |
| DMX έξοδος: |
1 x 3-pin XLR (F) mounting version |
| Χρήση εμπορικών σημάτων: |
Κατασκευασμένο με βύσματα NEUTRIK |
| Διαστάσεις: |
Πλάτος: 13 cm
Βάθος: 7 cm
Ύψος: 4,1 cm |
| Βάρος: |
500 g |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.