• Sealed Optics • DMX & ILDA control • 20K Scanner pair • Very wide beam angle • Runs pre-programmed shows from SD card • Flightcase, ILDA cable & 1G SD card included The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the […]
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area’s a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card
Βάρος
11.50 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “SHOWTEC 51329 Galactic RGB850 850mW Red/Green/Blue Laser, ILDA & DMX” Ακύρωση απάντησης
ARTLIGHT S-2000 1 Watt Animation Laser Light with DMX 512.
Content
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• Very wide beam angle
• Runs pre-programmed shows from SD card
• Flightcase, ILDA cable & 1G SD card included
The Galactic RGB 850 is the top model of the Galactic Series. Though the power is only 850mW, with help of the new 200mW 638nm red laser, the visual brightness is around a 1.2W traditional RGB laser with 660nm red laser. It has beautiful clear colors created by these 3 separate laser-diodes, Red, Green and Blue with TTL modulation. The RGB850 can be controlled by DMX and has many built-in figures and patterns. It can project two built-in patterns at the same time. You can also create your own designs and shows with any kind of ILDA laser software. The RGB850 is equipped with a 20K scanner pair which makes faster and bigger projections possible with less flickering. For rental solutions you can use the SD card slot to run pre-programmed shows without any controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 68 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 850mW (200mW 638nm Red, 150mW 532nm Green, 500mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-60˚
Control Modes: Auto, Sound, Master/Slave, DMX, ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 335 x 240 x 165mm (excl. bracket)
Dimensions flightcase: 760 x 435 x 315mm
Weight: 11,5 kg
Accessories: 2 Keys, Interlock test connector, flightcase, ILDA cable, 2G SD card
Description
Produces 2 synchronized laser beams
Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
RGY (Red, Green, Yellow) Class 3B Laser
o 650nm Red 150mW beam
o 532nm Green 150mW beam
o Mixed Yellow 300mW beam
The color of the beams changes all the time using laser blanking technology.
Several working modes:
o DMX controlled, 1 or 9 channels
o Stand-alone with built-in microphone
o Stand-alone automatic mode
Preprogrammed multi-color laser shows
DMX-addressing with LED display
Complies to EN/IEC 60825-1 for Laser Safety
Technical Information
Mains Input: AC 230V, 50Hz
Fuse: 250V 1.5A slow blow (20mm glass)
Sound Control: Internal microphone
DMX connections: 3pin XLR male / female
DMX channels: 1 or 9 channels
DMX starting address: 001 à 255
Laser Power: 150mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm)
1000MW RGB Multi Color DMX Laser Lights 1W Full Color Laser Beam Animation Scan DJ Laser Projector Party Stage Decor lazer Light.
Animation laser with high speed 5 Kpps stepper motor
60° scan angle
Precision beams with minimum divergence
32 pattern presets
DMX, sound and infrared control plus auto function
Master, slave and standalone modes
Display with 4 function keys for easy manual operation
Rugged aluminium enclosure with key switch
Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Product type
Laser
Total power
400 mW
Colour spectrum
RGB
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Laser Class
3B
Scanner
High speed stepper motors, 5 kpps
Max. scan angle
60 °
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
50 W
Power connector
IEC power connector male
Housing material
metal
Cabinet colour
Black
Width
180 mm
Height
90 mm
Depth
192 mm
Weight
2 kg
Description
The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
The color of the beams changes all the time using laser blanking technology.
Several working modes:
DMX-control: 1channel for easy operation or 10 channels for full control
Standalone: sound activated (internal mic) or automatic
Master/slave: wonderful synchronized shows
Optional CA-8 remote controller available
Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1
Built-in microphone
3-digit LED display for easy menu navigation
Optional CA-8 controller for additional functions available
Key actuated on/off switch and emergency switch (interlock) input for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.