Content |
• 5 Laser effects in one unit
• DMX & ILDA Control
• 620mW RGB laser with TTL modulation
• Moodbeam, Burst, Polar, 3D & Scanned beam FX
The Galactic FX RGB-620 is a 5-in1 FX 620mW RGB laser unit. It has an extra fx wheel in front of the scanner pair that creates Moodbeam, Burst, Polar, 3D and Scanned beam effects. Check the online video to see all the possibilities of this special galactic laser. It can be controlled by DMX with 19 channels or ILDA. When you use ILDA you have to connect a DMX controller (2 channels) to control the effects wheel because ILDA doesn't support extra controls besides scanner pairs and laser modulation. If you like to operate it without controller you can use the 6 built in programs which can play automatic or sound activated. It also has a slave mode for a set up with multiple units. All built in programs are also selectable by DMX. In DMX mode you also have many possibilities to control the 80 built in patterns like color, clipping, zooming, X-roll, Y-Roll, Z-Roll, X-move, Y-move and applying effects.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 40 Watt
Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
Laser Power: 620mW (120mW 638nm Red, 100mW 532nm Green, 400mW 450nm Blue)
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 25K
Scan Angle: +/-20˚
Control Modes: Auto, Sound, Master/Slave, DMX
Control Display: 4 Digits LED
DMX Channels: 19
Data Connector: In/Out, XLR 3Pin & Sub-D 25 Pole
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 290 x 240 x 110mm (excl. bracket)
Weight: 4,5Kg
Accessories: 2 Keys, Interlock test connector
|
Cameo D FORCE 3000 RGB
- 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
- Beam alignment without the need for servicing!
- Dust-proof aluminium casing for minimum maintenance
- 30 kpps high-speed galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precise beams with extremely low divergence for razor-sharp projections
- Interlock Out for sending the emergency switch-off signal
- Control via ILDA
- Scan Fail safety system
- Neutrik powerCON mains input and output
- Thermally activated fan for controlled operating temperature
- Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Laser sources
Laser diode
Scanner
30 kpps @ 8° ILDA
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Plug & play: no expensive controllers needed!
a multifunctional infrared remote can be used to control the functions
standalone mode with built-in microphone or automatic shows can be selected
all kinds of strobe effects
adjustable mounting bracket (stand) and power adapter included
key actuated on/off switch for additional safety
complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Details:
Mains Input: AC/DC Adapter 230V AC -> 12V / 600mA
Power consumption: 5,7W
Laser Power: 40mW green CW laser (532nm), 100mW red CW laser (650nm)
Laser radiation class: 3B Laser
Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002 + COTT
Patters: like Micro Star Laser, plus more patter
Operating modes: standalone mode with built-in or automatic
Remote control: inluded
Dimensions: 117 x 92 x 46 mm
Weight: 0,54kg
|
Laser φωτιστικό με POLAR AQUA LED effect με πράσινη 40mW και κόκκινη 80mW δίοδο. Φανταστικό εφέ προσομοιώνει το πολικό σέλας συνδυαστικά με υδάτινες μπλε αποχρώσεις. Κατάλληλο για καταστήματα, δεξιώσεις, decoration, club, cafe, bar κλπ.
- Το φανταστικό εφέ του POLAR LASER δημιουργείται από μία πράσινη δίοδο laser 40mW, μια κόκκινη δίοδο laser 150mW σε συνδυασμό με μπλε led για την προβολή εφέ νερού.
- Χρησιμοποιώντας ειδική τεχνολογία grating το εφε laser προσομοιώνει το πολικό σέλας γεμίζοντας τον χώρο
- Ιδανικό για τον φωτισμό επιφανειών και τοίχων σε bars, clubs, discotheques,ξενοδοχεία, αίθουσες, κλπ.
- Plug & play: δεν απαιτείται κονσόλα ή κάποιο άλλο χειριστήριο για τον έλεγχο. Όλες οι ρυθμίσεις γίνονται πάνω στην συσκευή
- Δυνατότητα συγχρονισμού με τον ρυθμό της μουσικής
- Ρυθμίσεις: φωτεινότητας και των διόδων laser και του led, περιστροφής και
- Τροφοδοσία: AC 240V, 50Hz
- Κατανάλωση: 15 Watt
- Laser Power: 40mW Green CW laser (λ = 532nm), 150mW Red CW laser (λ = 650nm)
- Laser radiation class: 3B
- LED Power 5W (blue ~ 455nm)
- Βάρος: 1,6kg
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
| Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE700RGB
- Product type: LASER
- Total power: 700 mW
- Colour spectrum: RGB
- Wavelength(s): 650 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 2 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 75 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.