Content |
- 2.5'' voice coil Kapton former
- Ferrite magnet
- 96.6 dB sensitivity
Manual |
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
DELTA-12A Standard American
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.
*Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers. Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 55 Hz
- Usable Frequency Range 54 Hz - 5 kHz
- Sensitivity 98.3
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 55 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.74 mH
- Mechanical Q (Qms) 5.27
- Electromagnetic Q (Qes) 0.46
- Total Q (Qts) 0.43
- Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
- Peak Diaphragm Displacement Volume 125 cc
- Mechanical Compliance of Suspension 0.21 mm/N
- BL Product (BL) 13.5 T-M
- Diaphragm Mass inc. Airload (Mms) 39 grams
- Efficiency Bandwidth Product (EBP) 120
- Maximum Linear Excursion (Xmax) 2.4 mm
- Surface Area of Cone (Sd) 519.5 cm²
- Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
- Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition felt dust cap
|
BETA-12CX American Standard Series
Recommended for professional audio as a mid-bass in either vented, or sealed satellite or floor monitor
enclosures. Also works nicely in vented two-way enclosures used for small coverage areas.
SPECIFICATION - Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 250 W / Music Program 500 W
- Resonance 43 Hz
- Usable Frequency Range 66 Hz - 20 kHz
- Sensitivity 96.7
- Magnet Weight 38 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 2“, 50.8 mm
THIELE & Small Parameters - Resonant Frequency (fs) 43 Hz
- DC Resistance (Re) 5.57
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 6.69
- Electromagnetic Q (Qes) 0.51
- Total Q (Qts) 0.48
- Compliance Equivalent Volume (Vas) 161 liters / 5.7 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 186 cc
- Mechanical Compliance of Suspension (Cms) 0.40 mm/N
- BL Product (BL) 10.0 T-M
- Diaphragm Mass inc. Airload (Mms) 34 grams
- Efficiency Bandwidth Product (EBP) 84
- Maximum Linear Excursion (Xmax) 3.5 mm
- Surface Area of Cone (Sd) 532.4 cm²
- Maximum Mechanical Limit (Xlim) 10.4 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 42.5-28 liters/1-1.5 cu.ft.
Vented 37-71 liters/1.3-2.5 cu.ft. - Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 4.47“, 114 mm
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Screened cloth dust cap
|
400 W continuous program power capacity |
|
90° nominal coverage |
|
50 – 20000 Hz response |
|
98 dB sensitivity |
|
XO-2 dedicated crossover network |
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 65W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 97dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Rounded copper | Magnet type | Ceramic | Magnet weight | 35oz, 0.99kg | Frequency range | 80-5000Hz | Resonance frequency, Fs | 85Hz | DC resistance, Re | 6.9Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 5.0“, 128mm | Magnet structure diameter | 5.7“, 145mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 12.1lb, 5.5kg |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.