TAPCO TWEEQ T-231 2X31 BAND GRAPHIC EQ

TWEEQ T-231Graphic equalizer 2x31 περιοχών

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
High pass filter / 40Hz  Low pass filter / 16kHz  
Επιλογή 6/12 dB  Bypass switch  
Ξεχωριστή ένδειξη Signal Clip για κάθε κανάλι RCA, TRS και ΧLR σύνδεση 

DBX IEQ15   

Γραφικό equalizer 2x15 περιοχών, με ενσωματωμένα
anti-feedback AFS, type V noise reduction, peak stop
limiter. XLR, ??? και euroblock είσοδοι &  έξοδοι 

Μονοκάναλο equalizer εμπνευσμένο από το κλασικό Neve 1073, με ζεστό και μουσικό ήχο σε πολύ προσιτή τιμή.

Το EQ-73 αποτελεί ουσιαστικά το eq section του Neve 1073 χωρίς το φίλτρο high-pass, ενώ έχουν προστεθεί περισσότερες συχνότητες οι οποίες λειτουργούν με ρυθμίσεις stepped στα πρότυπα της vintage μονάδας για καλύτερη δυνατότητα ανάκλησης των ρυθμίσεων. Συνολικά, το εύρος των ρυθμίσεων είναι από 20Hz εως 24kHz με κέρδος +/-15dB για τις δύο χαμηλότερες μπάντες και +/-18dB για την υψηλή μπάντα.

Συνδυάζοντας το Pre-73, το EQ-73 και ένα Unite Rack, έχετε την αυθεντική μονάδα Neve σε ασυναγώνιστη τιμή!

Χαρακτηριστικά:

• Vintage Style electronics
• Ρύθμιση stepped για την επιλογή συχνοτήτων
• Μεγάλο εύρος επιλογής από 20Hz ως 24kHz
• Εύρος ελέγχου -/+18dB
• Χωριστοί διακόπτες bypass για κάθε μπάντα
• Σχεδιασμένο για να χρησιμοποιείται με το insert jack του Pre-73
• TRS in/out jack, 18dBu nominal level
• Εξωτερική τροφοδοσία
• Κλασικός ήχος, ιδανικός για κάθε μουσικό στυλ
• Συμπαγής, ανθεκτική κατασκευή

The Rane ME 15S microGraphic Equalizer is a two-channel, 2/3-octave design with 20 mm sliders in a single rack space unit. It features a Range switch for high slider resolution in the ±6 dB mode, equivalent resolution to 45 mm sliders found on the DEQ 60L. The ±12 dB mode provides a wide range of control over system audio.

The active filter sections feature Raneʼs innovative constant-Q (constant bandwidth) design. Constant-Q means the bandwidth of each individual filter is guaranteed to be narrow enough to prevent unwarranted interaction between filters, yet wide enough to produce exactly the type of correction curve demanded by even the most unusual acoustic surroundings. This differs dramatically from conventional designs of the past, encumbered with the unfortunate characteristic of changing bandwidth when changing boost/cut amounts.

Front panel controls and indicators include an overall rotary Level control for each channel as well as Overload indicators. Passive pushbutton Bypass switches feature LED indicators, avoiding ambiguity by being on when the unit is Bypassed. (A passive Bypass switch requires no power to operate. This allows completion of the audio path should power fail in the ME 15S.)

Inputs and Outputs are electronically balanced designs, capable of unbalanced operation when required. They accept and drive all possible signal levels into normal load impedances. Balanced applications choose between the XLR or 1/4" Tip-Ring-Sleeve connectors. Unbalanced sources also may tie to the ME 15S through mono 1/4" connectors (no ring connection).

• Constant-Q Bandwidth Design
• Overall Level Controls and Passive Bypass Switches
• 20 mm Filter Slide Controls with ±6 dB or ±12 dB Slider Range
• Infrasonic, Ultrasonic, & RFI Filters
• Balanced XLR and 1/4" TRS Inputs and Outputs
• Universal internal switching power supply (100-240 VAC)

Ισοσταθμιστής 2 x 15 περιοχών, με ρύθμιση threshold και noise reduction ανά κανάλι, 2/3RDS octave, 2U. 

DBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction

 It's amazing. One little button. So much effect. dbx? Type III? Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus? Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!

SPECIFICATIONS:

Νέα έκδοση S γραφικού equalizer 1/3 της οκτάβας, 2x31 περιοχών constant Q. Επιλεγόμενο εύρος αυξομείωσης 6/12dB, φίλτρο αποκοπής χαμηλών συχνοτήτων στα 40Hz με 12dB ανά οκτάβα. Iσορροπημένες (balanced) είσοδοι και έξοδοι με XLR & TRS jacks, δυναμική περιοχή 108dB, 2U.

INPUT

Connectors: 1/4" TRS, female XLR (pin 2 hot)

Type: Electronically balanced/unbalanced, RF filtered

Impedance: Balanced 40k ohm, unbalanced 20k ohm

Max Input Level: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS

Connectors: 1/4" TRS, male XLR (pin 2 hot)

Type: Impedance-balanaced/unbalanced, RF filtered

Impedance: Balanced 100 ohm, unbalanced 50 ohm

Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +0.5/-1dB

Frequency Response: 50kHz, +0.5/-3dB

Dynamic Range: Typicall >112dB

Signal-to-Noise: Typically >95dB

THD+Noise: