| Content |
P-120D features 2x 200W into 4 Ohm load. This amplifier matches the needs for noiseless operation through air-cooling. It is ideally suitable in studios, small theatres, cabarets, churches, conference- and multimedia rooms etc. Multiple protection circuits care for stable operation. The amplifier is rackmountable (2 units). The optional transformer LT-101 converts the input to a balanced transformer isolated input. |
Ενισχυτής 6 μικροφώνων, 120W/100V, τροφοδοσία phantom, 5 ζώνες, EQ 5 περιοχών, 2 mic priority, δυνατότητα τοποθέτησης των modules pam-d (deck), pam-tuner, pam-cd, τόνος chime. Κατάλληλο για εκκλησίες και ξενοδοχεία.
|
|
| |
Rated Output Power
|
PAM-120A(THD 1%) : 120W (RMS)
PAM-340A(THD 3%) : 340W (RMS)
PAM-480A(THD 3%) : 480W (RMS)
| |
Frequency Response
| |
Amp In
|
80Hz~20kHz
| |
Link In
|
80Hz~15kHz
| |
CH1~CH6
|
120Hz~8kHz
| |
Remote In
|
120Hz~8kHz(PAM-340A, PAM-480A)
| |
T.H.D.(at 1kHz Rated Output)
|
Less than 1%(PAM-120A)
| |
T.H.D.(at 1kHz Half Power Output)
|
Less than 0.5%(PAM-340A, PAM-480A)
| |
S/N
| |
Amp In
|
Better than 90dB(PAM-120A)
Better than 88dB(PAM-340A/480A)
| |
Link In
|
Better than 65dB
| |
CH1~CH6
|
Better than 50dB
| |
Remote In
|
Better than 50dB(PAM-340A/480A)
| |
Input Sensitivity/Impedance
| |
CH1~CH6
| |
TRIM VR -60dB Position
|
1mV/10kΩ
| |
TRIM VR -16dB Position
|
158mV/10kΩ
| |
Link In
|
100mV/10kΩ
| |
Amp In
|
1V/47kΩ(PAM-120A)
1V/20kΩ(PAM-340A/480A)
| |
Remote In
|
1V/10KΩ(PAM-340A/480A)
| |
Speaker Output/Impedance
|
PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω
PAM-340A : 340W, 100V/29.4Ω
PAM-480A : 480W, 100V/20.8Ω
| |
Preamp Output/Impedance
|
1V/600Ω
| |
Tone Control (100Hz, 10kHz)
|
±12dB
| |
CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)
|
±12dB
| |
|
| |
|
| |
Power Source
|
100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)
| |
|
(Supplied AC mains transformer depends on country requirements)
| |
Power Consumption
|
PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)
PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)
PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)
| |
Weight
|
PAM-120A : 13kg/28.7lb
PAM-340A : 13.5kg/29.7lb
PAM-480A : 15.5kg/34.2lb
| |
Dimensions
|
420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in
| |
Operation Temperature
|
14F~104F (-10°C~+40°C)
|
|
Ενισχυτής Commerciall Audio 35w/8Ω/70V/100V με προενισχυτή 3 εισόδων-1 ζώνη εξόδου, είσοδος μικροφώνου/line balanced με δυνατότητα priority-2x unbalanced RCA inputs-Βass/Treble+Master Level-Preamp Line out. Υποδοχη σύνδεσης τηλεφώνου. Για χρήση σε καταστήματα, νοσοκομεία, σχολεία, εκκλησίες, εργοστάσια κλπ. Dip switches για ρύθμιση λειτουργίας εισόδων. Διαστάσεις: ½ πλάτος rack-ύψος 2URack-Βάθος 35cm.
|
Ενισχυτής αυτοκινήτου 15W/12V με αποσπώμενο δυναμικό μικρόφωνο + on/off διακόπτη ομιλίας.
| Specification |
|
|---|
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | | Power Consumption | 2.2A or less at rated power output. | | Output Power | Rated 15W, max. 35W | | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | | Distortion | Less than 5% (at 1kHz rated output) | | Frequency Response | 100 ~ 10,000Hz | | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | | Dimensions | (W x H x D): 178 x 50 x 132mm (mounting device excluded) | | Weight | 900g | | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (4A) ... 1
Connection cord ... 1 set | | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
| Power Source | Supplied from VP-2064, VP-2122, VP-2241 or VP-2421 | | Current Consumption | 30 mA or less | | Power Amplifier Link | RJ45 female connector for connecting the VX-200SP,
VX-200SZ Audio Output module, or SX-2100AO.
Twisted-pair straight cable (TIA/EIA-568A standard) | | Finish | Panel: Surface-treated steel plate | | Dimensions | 88 (W) × 25.8 (H) × 53.2 (D) mm | | Weight | 50 g | | Applicable Model | VP-2064, VP-2122, VP-2241, VP-2421 |
|
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 1000: 2x500 W/100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 33 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.