Μεγάφωνο ψευδοροφής 6W/100V. SPL 89dB (1W/1m), 55 - 18.000Hz, 5" (12cm) cone-type. Διάμετρος 180mm, Βάθος 70mm. Λήψεις: 6W - 3W - 1,5W - 0,8W
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
In-Ceiling Audiophile Magic |
RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.
- Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
|Dimensions - Cut-Out Diameter ||7 5/8 (19.37cm) " |
|Dimensions - Mounting Depth (includes 1/2 drywall)“ ||2 3/8 (6.03cm) " |
|Dimensions - Overall Depth ||2 7/8 (7.30cm) " |
|Dimensions - Overall Diameter ||9 (22.86cm) " |
|Dimensions - Pre-Construction Bracket ||PB 60 |
|Driver Complement Mid / Woofer - Diameter ||6 1/2 (16.51cm) " |
|Driver Complement Mid / Woofer - Quantity ||1 |
|Driver Complement Mid / Woofer - Type ||Dynamic Balance driver with mineral-filled polymer cone and rubber surround |
|Driver Complement Tweeter - Diameter ||3/4 (1.91cm) " |
|Driver Complement Tweeter - Quantity ||1 |
|Driver Complement Tweeter - Type ||Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount |
|Electrical - Efficiency ||89 dB |
|Electrical - Inputs ||Spring-loaded clips |
|Electrical - Lower -3dB Limit ||60 Hz |
|Electrical - Nominal Impedance ||8 ohms |
|Electrical - Recommended Amplifier Power ||20 - 100 watts per channel |
|Electrical - Total Frequency Response ||40Hz - 20kHz |
|Electrical - Upper -3dB Limit ||20 kHz |
|Shipping - Total Shipping Weight ||6 pounds |
|Shipping - Unit of Measure ||pair |
|Warranty - Speaker Warranty ||Lifetime ||
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-1/4” | 10.8 cm
Driver Complement :One 1" pure aluminum dome pivoting tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :28 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years
Consistent 120° broadband pattern control covers an extremely large area. 8 inch woofer with Kevlar reinforced cone and 2 inch voice-coil. 25 mm (1" exit) compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music 250 Watt power handling with very high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Frequency Response 60 Hz - 16 kHz, +/-3dB Maximum Power Handling 600 Watts long-term, 100 hrs. 1000 Watts pink noise, 2 hrs. Impedance 8 Ohms SPL 118dB avg., 124dB peak Beamwidth 120° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 120° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 120° conical, broadband (1kHz - 10kHz) Directivity Factor: 7.0 (1kHz - 16kHz) Index: 8.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Titanium diaphragm compression driver with diamond surround and ferro-fluid cooling Ported Metal Baffle Magnet Saturated-gap geometry Voice Coil LF: 2" HF: 1" Dimensions (HxWxD) 12 x 12 x 6.3" (305 x 305 x 160mm) Weight 10 lb (4.5 kg)
Μεγάφωνο ψευδοροφής 8" 6W, με μετ/στή 70/100V (1,5/3/6W), 97dB, 50Hz - 18kHz.
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Dog-Ears for Easy Blind Mount
High Sensitivity for Maximum Power
Open-back design for applications not
requiring an in-ceiling backcan.
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums