Stock | Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
|
Content |
The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.
Power Source | 230 V AC | Power Consumption | 240 W max. | Applicable Battery | YUASA NP series (12 V × 2 or 4) | Charging Method | Trickle charging | Charging Current | 5 A max. | Charging Output Voltage | 27.3 V ±0.3 V (at 25℃)
Temperature correction coefficient: -40 mV/℃ | Power Supply Input | 6 M4 screw terminal | DC Power Output | 6 (25 A max. each) M4 screw terminal | Control Connector | RJ45 female connector for connecting the VX-2000SF Surveillance Frame.
Twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check
charging circuit failure | Battery Connection | 1 pair of positive and negative terminals
Applicable cable diameter: AWG 6 - AWG 1/0 | Operating Temperature | 0℃ to +40℃ | Finish | Panel: Surface-treated steel plate | Dimensions | 482 (W) × 88.4 (H) × 377.6 (D) mm | Weight | 10.5 kg | Accessory | Rack mounting screw ……4
Fuse (T3.15 A L) ……1
Attention label (German) ……1 |
|
Αυτόματη φόρτιση, έλεγχος συνεχόμενου ρεύματος. Ενταση φόρτισης συνεχόμενου ρεύματος 3 Α DC. Τάση φόρτισης συνεχόμενου ρεύματος 27,3 VDC max. Oθόνη με αμπερόμετρο και βολτόμετρο. Κατανάλωση 130 W. Βάρος 7kg. Διαστάσεις (482Χ88Χ380mm) |
Επιτοίχιο Remote control module για τηλεχειρισμό μέσω καλωδίου Cat5, δυνατότητα επιλογής πηγής και ελέγχου στάθμης, δυνατότητα για επιπλέον είσοδο μικροφώνου ή line. Tροφοδοσία 24VDC μέσω του matrix PX-8000, βάρος125g. |
Δέκτης 1U AM/FM 30 memories auto scan
SPECIFICATIONS:
Tuning RangeFM: 87.5 - 108MHz
AM: 522 - 1611kHz SensibilityFM: Less than 3uV
AM: Less than 100uV Signal to Noise RatioFM: Greater than 65dB
AM: Greater than 40dB Total Harmonic Distortion (THD)FM: 0.3%
AM: 1% Output LevelFM Mono Balanced: 1V
FM Stereo Balanced: 500mV
AM Mono Balanced: 240mV Controls1 x Power Switch
1 x Memory Button
1 x Preset Button
1 x Mode Preset/Tune Button
10 x Preset Recall Buttons
1 x Volume Control Knob
1 x Mono/Stereo Button
1 x AM Selector Button
1 x FM Selector Button
1 x Up Button
1 x Down Button
1 x Reset Button (Rear Panel) Connectors1 x AC Power In
1 x DC Power In
1 x Fixed Output Connector
1 x Mono Variable Output Connector
1 x Stereo Variable Output Connector
1 x AM Antenna Connector
1 x FM Antenna Connector
1 x Digi-Link Connector Power Source100/120/230/240VAC, 50/60HZ
24VDC Power Consumption11W Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280 mm) Weight7.7 lbs (3.5 kg)
|
Επαγγελματικό Program timer 2U. Δυνατότητα ελέγχου μέσο αριθμημένων κομβίων και οθόνης LCD που βρίσκονται στην μπροστινή όψη της συσκευής. Σύνδεσης μέσο θύρας RS-232 με PC. 15 ενσωματωμένοι ήχοι από το PV-632. Λειτουργίες προστασίας και backup. Βάρος 5,7kg, διαστάσεις (W x H x D) 482 x 88 x 380 mm. |
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.