Content | Genuine stylus Tonar 6548 DS, N44-7, N44G-DJ, Replacement for Shure Cartridge M44-7 and more
High Quality aftermarket replacement stylus Shure N44-7
Specs:
Spherical Diamond Tip 0.7mil
Tracking Force: 3.5 – 4.5 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Gray
Fits the following models:
Dual DN 305, Shure N 44C, N 44G, N 44-7, N 55 E, Pfeifer 10472, Pfeifer 10473, Gamma 306, 313482
|
Genuine Original Stylus for OM 20, OM 20 Super, OMP20, LM 20, Concorde 20, TM 20
Nude Elliptical
|
ORTOFON 320 Ανταλλακτική βελόνα
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 25 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,25-17,5 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Grey
Recommended for following cartridges Series 320 Universal |
| DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Spherical Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S | Technical data
Output |
3,5 mV |
|
Frequency response |
10-25.000 Hz dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
30 µm/mN |
Stylus type |
Spherical |
Stylus tip radius |
R 15 µm |
Tracking force range |
1,25-1,75 g (12,5-1,75 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
Recommended for following cartridges |
Dual TKS 49S |
Recommended for following cartridges - Dual TKS 49 S
*) Typical value |
βελόνα για την κεφαλή της Ortofon σειρά DIGITRACK . |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.