TURBOSOUND iQ15 Αυτοενισχυόμενο ηχείο δύο δρόμων15″ 2500W RMS

• Αυτοενισχυόμενο ηχείο δύο δρόμων
• Πλαστικη καμπίνα
• Woofer 15" και κόρνα 1“
• Ενισχυτής 2500W RMS class D με limiter
• Διασπορά 75 Χ 55
• Απόκριση συχνότητας 42 - 20000 Hz
• 132dB max SPL
• Παρέχονται 2 είσοδοι με Balanced XLR combo/ jack με επιλογή MIC/LINE
• 2 Link out με Balanced XLR για κάθε είσοδο & 1 XLR out mix
• Διαθέτει είσοδο & έξοδο δικτύου (CAT5) για την σύνδεση και τον έλεγχο του ηχείου μέσω των ψηφιακών κονσολων BEHRINGER X32 & MIDAS M32
• Διαθέτει επεξεργαστή DSP (LCD Screen) με δυνατότητα προσομοίωσης του ηχείου με άλλα μοντέλα της αγοράς (EAW JF59NT, EV ELX115P, JBL PRX615M, Martin F15+, Meyer UPQ-1P, Nexo PS15-R2, Turbosound NuQ15-DP)
• Επιλογή λειτουργίας 4 θέσεων (Live, Speech, Playback, User)
• Ρύθμιση Low/High Selving
• Παραμετρικό eq 2 περιοχών
• Ρύθμιση high pass ( iQ15B, iQ18B, User )
• Ρύθμιση Crossover από 75 Hz έως 400 Hz και επιλογή αναστροφής φάσης
• Δυνατότητα ανίχνευσης μικροφωνισμών με αυτόματη ή χειροκίνητη λειτουργία και απομνημόνευση 8 συχνοτήτων
• Επιλογή τοποθέτησης 4 επιλογών ( Stand, Wall, Ceiling, Corner )
• Delay από 0-300 ms & Limiter Threshold έως -30dB
• Επιλογή αποθήκευσης ρυθμίσεων 20 θέσεων μνήμης User
• Φωτεινή ένδειξη λειτουργίας ή limit στην πρόσοψη
• Bάρος 26,1 kg
• Μαύρο χρώμα
• Είσοδος/έξοδος τροφοδοσίας με powercon
• Διαθέτει φωλιά για βάση στήριξης και 3 σημεία στήριξης Μ10

The Turbosound iQ15 PA Loudspeaker is perfect for a wide range of portable and fixed installation applications. The iQ15 features a 15\'\' low frequency driver with a low mass voice coil and a 1\'\' compression driver, this combination delivers improved transient responses as well as crystal clear, extended high frequency sound reproduction. This powered loudspeaker also comes equipped with premium features that include extensive yet simple to use DSP controls, Spatial Contour Control (SCC), Ultranet digital audio networking and a user-friendly LCD display.

The rear panel houses a fully featured interface that includes a LCD display, Channel A/B gain control and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer integration and Feedback Control (FBI). The rear panel also features two balanced XLR inputs, balanced XLR outputs for each of the two independent channels, a Mix output XLR connector and level control with a signal LED on each channel.

The iQ15 active speaker is equipped with a sophisticated but easy to use Klark Teknik Digital Signal Processor (DSP), which provides a dynamic EQ for incredible full range responses and transparent limiting for the utmost clarity at high output levels, as well as long-term reliability. The advanced DSP also includes speaker modelling presets that consist of detailed and accurate models of some of the audio industry\'s most-respected loudspeakers.

Another DSP function that was developed by Klark Teknik is the Spatial Contour Control (SCC), allowing you to optimise the iQ15\'s frequency response for the physical speaker placement. This advanced function not only adds versatility, it provides accurate frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio monitors.

An onboard USB port delivers access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.

Turbosound\'s proprietary Ultranet technology provides the ability to use CAT5 cables for transmitting pristine multi-channel audio signals and other information between Ultranet-enabled products - such as digital mixers, powered loudspeakers, and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk that\'s typically found in analogue methods, but also significantly reduces the setup and installation time required.

• 2 way full range loudspeaker for portable PA and installation applications
• 2,500 Watt power featuring KLARK TEKNIK Class-D technology
• KLARK TEKNIK Digital Signal Processing for total system control
• Speaker modelling includes accurate models of industry standard speakers
• SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
• ULTRANET digital audio networking connects to mixers and other sources
• 15" low frequency driver with low mass voice coil for improved transient response
• High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
• Fully featured user interface with LCD display for ease of navigation
• PC remote control software downloadable at turbosound.com
• Lightweight fibre glass reinforced composite enclosure
• Rugged powder coated perforated steel mesh grille
• Dual angle pole mount for accurate audience coverage
• Multiple internal rigging points for installation applications
• Mains input and link output on Neutrik powerCON* connectors
• Designed and engineered in England

Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.

SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.

5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.

- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.

APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.

Features

    400 Watt digital bi-amplification
    128 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    15" High power woofer, 2.5" voice coil
    1" Mylar dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 50 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 1" 1.4" voice coil
    Woofer: 15" 2.5" voice coil

Input/Output Section

    Input signal: bal/unbal
    Input connectors: xlr-Jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1800 Hz
    Limiter: Fast limiter, RMS limiter
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W
    Connections: VDE

Cabinet

    Cabinet Material: Composite PP
    Hardware: 2 x M10 flying points
    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel
    Colour: Anthracite grey

Physical Specifications

    Height: 708/27.8 mm/inch
    Width: 437/17.2 mm/inch
    Depth: 389/15.3 mm/inch
    Net Weight: 18.2/40.12 kg/lbs

The das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 115 is a compact self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive extended bass & punchy mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible Spls in excess of 130db!. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class. Now supplied with free heavy duty speaker stands!

TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
400 Watts RMS per speaker
130dB Maximum SPL
45-20,000Hz frequency range
2 way
14" woofer speaker
1" m-34 compression driver
bi-amplified
Built-in 2-channel mixer
6.3mm (1/4“) jack inputs (mic & instrument level switchable)
Xlr input (mic & instrument level switchable)
Xlr output (linkable)
Lightweight Polypropylene enclosure - only 22.1kg each!
Black finish
>>>INCLUDES FREE HEAVY DUTY SPEAKER STANDS
Includes FREE Wharfedale DM 4.0 microphone!

Αυτοενισχυόμενο ηχείο δύο δρόμων 500 Watts RMS με 15'' woofer και 1'' κόρνα,
είσοδο balanced για mic και line input με ισοσταθμιστή 2 περιοχών.

Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.

The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.

The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

Product Features:

• High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
• “Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn
• Additional Line output allows linking of additional speaker systems
• Versatile trapezoidal enclosure design allows different positioning:
• - Stand mounting with 35 mm pole socket
• - Tilts on its side for use as a floor monitor
• Ergonomically shaped handles for easy carrying and setup
• High-quality components and exceptionally rugged construction ensure long life

 User's Manual