Velodyne EQ-Max 15 Inch Subwoofer ΗΧΕΙΟ SUB

Ενεργό Subwoofer 15”με ενισχυτή ισχύος 750WRMS/1500 WPeak, Τετραπλό πηνίο φωνής
2.5ʼʼ, Φωτεινό panel ενδείξεων (Blue LED), Ενσωματωμένο σύστημα D.S.P., 4 ψηφιακά
Presets λειτουργίας, Ρύθμιση έντασης, ενεργό ρυθμιζόμενο crossover 40-135 Hz, Ρύθμιση
φάσεως 0°,90°,180°,270°, είσοδοι Low & High, απόκριση συχνότητας 14-240Hz, 23-120Hz +/-
3dB, εξωτερικό μικρόφωνο, Σύστημα auto ON/OFF, Ασύρματο τηλεχειριστήριο, χρώμα black
vinyl,
Διαστάσεις (H/W/D): 54cm x 48cm x 53cm, Βάρος 32kgr

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122

ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

Ενεργό υπογούφερ κλειστού τύπου. Μεγάφωνο
μεγάλης διαδρομής διπλής ανάρτησης 250mm
Paper/Kevlar. Ενισχυτής class D 500 Watt.
Είσοδοι σήματος LINE και ηχείων, 12V trigger.

Amplifier Output:    1000 watts (RMS) 2000 watts (Peak)
Frequency Response:    16Hz to 40/160Hz variable
Crossover (Low Pass):     40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass):    16Hz - 31Hz
EQ:    4 x Presets 1 x User Setting
Equalisation:    Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level:     -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements:     Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control:    0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory:    3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth:    Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight:    50 Kg (110lbs)
Mains input Voltage:    100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

 User's Manual

ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ