VOX VIBRAVOX Tremolo/Vibrato ΠΕΝΤΑΛ

Μη Διαθέσιμο

167.00 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Μη Διαθέσιμο Μη Διαθέσιμο Κωδικός προϊόντος: VOX VIBRAVOX Κατηγορία:
Named after VOX’s first amplifier tremolo circuit, the VIBRAVOX essentially recreates the unique and immensely satisfying Vib/Trem sound from a “traditional” AC30 and puts it into a pedal that can be used with any amp. To increase flexibility we’ve added additional user control and features. By including two Speed controls and an effects assign switch […]

 

Διαβάστε περισσότερα

Named after VOX’s first amplifier tremolo circuit, the VIBRAVOX essentially recreates the unique and immensely satisfying Vib/Trem sound from a “traditional” AC30 and puts it into a pedal that can be used with any amp.

To increase flexibility we’ve added additional user control and features. By including two Speed controls and an effects assign switch (T1/T2, T1/V2, V1/V2), a number of possibilities become available. The VIBRAVOX can be configured as a tremolo only or vibrato only pedal with two foot-switchable speeds. You can also choose to configure the pedal to switch between tremolo and vibrato. To top it off, the pedal automatically ramps between speeds, adding a taste of that unmistakable “rotating-speaker” sound.

  • VibraVOX CT06
  • Connection: Input: x1 (guitar input), Output: x1 (line output)
  • Controls: Depth, Ratio, Skew, Volume, Speed 1, Speed 2, Mode Select
  • Tube: 12AU7
  • Power: 4 x AA batteries (allows 16 hours of operation)
  • Dimensions: 1 6.84 cm (6.63”) (W) x 15.55cm (6.12”) (H) x 6.4cm (2.52”) (D)
  • Options: 9V AC adapter

 

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “VOX VIBRAVOX Tremolo/Vibrato ΠΕΝΤΑΛ”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

VOX VIBRAVOX Tremolo/Vibrato ΠΕΝΤΑΛ removeDIGITECH XHP HYPER PHASE PEDAL removeBOSS FZ-5 ΠΕΤΑΛ LEVEL-MODE-FUZZ removeVOX SNAKE CHARMER ΠΕΝΤΑΛ COMPRESSOR removeBOSS AW-3 Dynamic Wah ΠΕΝΤΑΛ removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE ΠΕΝΤΑΛ remove
NameVOX VIBRAVOX Tremolo/Vibrato ΠΕΝΤΑΛ removeDIGITECH XHP HYPER PHASE PEDAL removeBOSS FZ-5 ΠΕΤΑΛ LEVEL-MODE-FUZZ removeVOX SNAKE CHARMER ΠΕΝΤΑΛ COMPRESSOR removeBOSS AW-3 Dynamic Wah ΠΕΝΤΑΛ removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE ΠΕΝΤΑΛ remove
Image
SKUVOX VIBRAVOXXHP690.ROL.030VOX SNAKE CHARMER690.ROL.114E007855
Rating
Price 167.00 με ΦΠΑ 24% 52.00 με ΦΠΑ 24% 137.63 με ΦΠΑ 24% 87.01 με ΦΠΑ 24% 173.59 με ΦΠΑ 24%42.00 με ΦΠΑ 24%
Stock

Εξαντλημένο

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

AvailabilityΕξαντλημένοΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Named after VOX's first amplifier tremolo circuit, the VIBRAVOX essentially recreates the unique and immensely satisfying Vib/Trem sound from a "traditional” AC30 and puts it into a pedal that can be used with any amp.

To increase flexibility we've added additional user control and features. By including two Speed controls and an effects assign switch (T1/T2, T1/V2, V1/V2), a number of possibilities become available. The VIBRAVOX can be configured as a tremolo only or vibrato only pedal with two foot-switchable speeds. You can also choose to configure the pedal to switch between tremolo and vibrato. To top it off, the pedal automatically ramps between speeds, adding a taste of that unmistakable "rotating-speaker” sound.

  • VibraVOX CT06
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Controls: Depth, Ratio, Skew, Volume, Speed 1, Speed 2, Mode Select
    • Tube: 12AU7
    • Power: 4 x AA batteries (allows 16 hours of operation)
    • Dimensions: 1 6.84 cm (6.63”) (W) x 15.55cm (6.12”) (H) x 6.4cm (2.52”) (D)
    • Options: 9V AC adapter

 

The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.

The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.

The main features of the Digitech XHP HYPER PHASE include:

  • Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
  • 7 Different phase types
  • Speed, Depth, Regen, and Mode controls
  • Triggering and step capability
  • Stereo outputs with switchable CIT Cabinet Modeling

The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.

  • Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
  • Uses advanced COSM technology to recreate classic fuzz
  • BOOST control for more aggressive tone
  • Road-tough BOSS metal construction
Nominal Input Level-20 dBu
Input Impedance1 M ohm
Nominal Output Level-20 dBu
Output Impedance1 k ohm
Recommended Load Impedance10 k ohms or greater
ControlsPedal switch, LEVEL knob, FUZZ knob, MODE knob
IndicatorCHECK indicator (Serves also as battery check indicator)
ConnectorsINPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V)
Power SupplyDC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
Current Draw36 mA (DC 9 V)
Expected battery life under continuous useCarbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
AccessoriesOwner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61)
OptionsAC Adaptor (PSA series)
Size and Weight
Width
73 mm2-7/8 inches
Depth
129 mm5-1/8 inches
Height
59 mm2-3/8 inches
Weight
440 g1 lbs.
 

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

  • Snake Charmer Compressor CT05
    • Connection: Input: x1 (guitar input), Output: x1 (line output)
    • Input / Output Impedance: 830 k-ohm / 4 k-ohm
    • Tube: 12AU7 (ECC82)
    • Power Supply: Four AA alkaline batteries or DC9V AC adapter
    • Battery Life: Approx. 18 hours
    • Current Consumption: 95 mA
    • Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
    • Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
    • Included Items: Four AA alkaline batteries

 

The BOSS AW-3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects, plus a new "Humanizer" effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar.

  • Compact pedal creates a variety of classic "wah" effects
  • Dynamic wah sounds provide variable effect based on picking strength
  • “Humanizer" effect creates human voice-type vowel sounds
  • Dedicated Bass input for processing bass guitar
  • EXP Pedal mode allows wah control via optional expression pedal
  • Tempo can be set for pedal control or at fixed rate via Manual mode
  • BOSS 5-year warranty
  • Πετάλ κιθάρας vintage tube overdrive
  • Λειτουργεί με μπαταρία 9V ή με εξωτερικό τροφοδοτικό PSU-SB DC (η μπαταρία και το εξωτερικό τροφοδοτικό δεν περιλαμβάνονται)
  • 1 Χρόνος Εγγύηση
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the Behringer PSU-SB DC power supply (not included)
  • First-class electronic On/Off switch for noise-free operation
  • 3-Year Warranty Program*
  • Designed and engineered in Germany

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation
Weight1.00 kg1.00 kg0.44 kg1.00 kg1.20 kg0.50 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 1.00 kg
Βάρος 0.44 kg
Βάρος 1.00 kg
Βάρος 1.20 kg
Βάρος 0.50 kg