YAMAHA X4228C00 TWEETER ΑΝΤΑΛΛΑΚΤΙΚΟ Για NS 777, NS 555

84.95 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο Διαθέσιμο Κωδικός προϊόντος: JA05Y1 Κατηγορία:
Yamaha Original spare part code X4228C00 Tweeter JA05Y1 FOR NS777, NS555 Spare part tweeter 2.5 cm Power : 50W / 6 Ohm

 

Διαβάστε περισσότερα

Yamaha Original spare part code X4228C00 Tweeter JA05Y1 FOR NS777, NS555

Spare part tweeter 2.5 cm

Power : 50W / 6 Ohm

Βάρος 1.20 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “YAMAHA X4228C00 TWEETER ΑΝΤΑΛΛΑΚΤΙΚΟ Για NS 777, NS 555”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

YAMAHA X4228C00 TWEETER ΑΝΤΑΛΛΑΚΤΙΚΟ Για NS 777, NS 555 removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-16 Driver 60W RMS, 106dB, 2.5-20k removeB & C Speakers DE-1050 Driver 2inch 140W removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω remove
NameYAMAHA X4228C00 TWEETER ΑΝΤΑΛΛΑΚΤΙΚΟ Για NS 777, NS 555 removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-16 Driver 60W RMS, 106dB, 2.5-20k removeB & C Speakers DE-1050 Driver 2inch 140W removeJBL 2450J NEODYMIUM DRIVER 4' 150W 16Ω remove
Image
SKUJA05Y1DE-85DE-45DE-16DE-10502450J
Rating
Price 84.95 με ΦΠΑ 24% 206.66 με ΦΠΑ 24% 136.15 με ΦΠΑ 24% 99.20 με ΦΠΑ 24% 524.22 με ΦΠΑ 24% 1,465.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Yamaha Original spare part code X4228C00 Tweeter JA05Y1 FOR NS777, NS555

Spare part tweeter 2.5 cm

Power : 50W / 6 Ohm

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Driver 1" και έξοδο throat 1“, 8 Ohm, 80W continuous / 40W Nominal Power (AES), ευαισθησία 107dB (1w/1m) απόκριση συχνότητας 1,5 - 18kHz, 1,6kg. DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

Driver 2“, 140W, 109dB, 0.5-20kHz, διάφραγμα
τιτανίου, 3.4kg

280 W continuous program power capacity
2” horn throat diameter
100 mm (4 in) aluminium voice coil
Titanium diaphragm
500 – 20000 Hz response
109 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response

 

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 16Ω

Weight1.20 kg4.50 kg2.00 kg1.70 kg3.40 kg10.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.20 kg
Βάρος 4.50 kg
Βάρος 2.00 kg
Βάρος 1.70 kg
Βάρος 3.40 kg
Βάρος 10.00 kg