YAMAHA XP-1000 2X155W POWER AMPLIFIER

Yamaha Power Amplifier - XP1000 2 x 110-Watts, 8-Ohms Stereo, 100-Volt, High Sound Quality,
20Hz-20kHz, High Reliability and High Stability, Light Weight and Compact Design of 2U Size,
High-Pass Filter.

The XP power amplifier series featuring high power, high quality, high reliability and high stability
matches various installation sound systems and provides superior acoustic features even in live
performance applications. The series is equipped with various protection circuits including a circuit
for detecting power-on/off, output protection circuit and DC detection circuit. Various indicators
display the status of the protection system. Indicators include PROTECTION indicator, TEMP
indicator that shows overheating of the heat sink, POWER/STANDBY indicator that shows the
power status, as well as SIGNAL and CLIP indicators for each channel.

APPLICATIONS:
Live Performance 
Churches 
Halls 
Banquet Rooms 
Conference Rooms 
Restaurants
 
5-model lineup ranging from 700W* output to 100W* output *(STEREO 8 ohms). 
High sound quality equivalent to upper-class models with parts and emphasizing
on superior sound. 
While realizing a design that ensures high sound quality, efficiency has been
planned down to the finest details for full achievement of both high-definition sound
and superior value. 
Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology
EEEngine installed. 
A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the
rear panel for compatibility with a wide variety of input levels. 
Light weight and compact design of 2U size for installation in any location. 
Monitor and remote terminals for monitoring and control from a remote location. 
High-accuracy 1dB-step detented attenuator. 
Various terminals and features suitable for professional use. 
Special high-pass filter that enables change of cut-off frequency. 
Equipped with various protection circuits, indicators and stepless low-noise fans. 
Best matches with the digital mixing engine DME64N/24N and Installation series
speakers.
 
Output Power, 8? 100W+100W
S/N Ratio, 20Hz-20kHz 96dB
Idle Power Consumption 20 Watts
1/8 Power Consumption (4?/Pink noise) 170 Watts
Power Bandwidth (half power THD+N=0.5%) 10Hz-40kHz
THD+N 20Hz ? 20kHz, half power 0.1%
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response RL=8?, Po=1W,HPF=OFF 0dB
Channel Separation, Half power RL=8? 1kHz, ATT. Max input 600? shunt 70dB
Residual Noise Att. min, 20Hz-20kHz (DIN AUDIO) -70dBu
Damping Factor, 8?, f=1kHz 200
Voltage Gain, ATT. max 32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Input Impedance 20k?(balance) 10k?(unbalance)
Controls, Front panel Power switch(push on/push off), attenuator(31position) x 2
Controls, Rear panel Mode switch(Stereo/Bridge/Parallel) x 1, HPF switch x 2,
Gain Select switch x 1
Connectors, Input XLR-3-31 type/ch, Euroblock connector(balance)/ch
Connectors, Output Speakon/ch, 5way binding post x 1
Connectors, Monitor/Remote Dsub15P x 1
Indicators Power/Standby x 1(Green/Orange), Signal x 2(Green), Clip/Limit x 2(Red)
Amplifier Protection Thermal: cut the output(heatsink temp ? 90°C) do not return
automatically
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Weight 12kg (26.5 Ibs.)
Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16“)
 

Τελικός Ενισχυτής Switching,ισχύος 2x500W@4Ω, ενσωματωμένο
DSP για κάθε κανάλι, είσοδοι τύπου Phoenix & HD-15, έξοδοι τύπου
Barrier Strip, διαχείριση μέσω με H/Y (USB) συμβατότητα με HiQnet.
Κατάλληλος για κινηματογραφική για χρήση, 15 έτοιμα εργοστασιακό
preset για κινηματογραφικά ηχεία JBL. Bάρος 8,6 kg.

Power Output Level R-300 PLUS

STEREO
8ohm(T.H.D 0.05%)  170W+170W
4ohm(T.H.D 0.05%)  250W+250W

BRIDGED MONO
8ohm(T.H.D 0.05%)  460W
8ohm(T.H.D 0.5%)    500W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10kΩ@0.775V Inputs

Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.