The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications. XP7000 700W + 700W (8 ohms, 20 Hz – […]
The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications.
The Yamaha XP series offers five power amplifier models that deliver unmatched quality and value for installations. These power amplifier feature high power, outstanding sound quality, extended reliability, and superior stability for a wide range of installed sound systems as well as portable live sound applications.
+4dBu/26dB/32dB gain switch for flexible level matching.
Lightweight, compact 2U design for easy handling and installation.
Monitor and Remote terminals for remote monitoring and control.
Precision 1-dB/step detented attenuators.
A selection of terminals and features for professional connectivity.
Frequency-switchable high-pass filter for subsonic noise reduction or subwoofer matching.
Comprehensive protection circuits, indicators and variable-speed cooling.
Ideal matches for the DME64N/24N Digital Mixing Engines and Installation Series speakers
General specifications
Model
XP7000
Dynamic power 1kHz; 20ms nonclip
2ohms; Stereo
1600Wx2
4ohms; Bridge
3200W
Output power; 1kHz
4ohms; Stereo
1100Wx2
8ohms; Stereo
750Wx2
8ohms; Bridge
2200W
Output power; 20Hz-20kHz
4ohms; Stereo
950Wx2
8ohms; Stereo
700Wx2
8ohms; Bridge
1900W
70V line RL=8ohms
625Wx2
100V line RL=16ohms
-
General specifications
Model
XP7000
Power bandwidth
10Hz-40kHz
Total harmonic distortion
Less than 0.1% (20Hz-20kHz, half power)
Intermodulation distortion
Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response
0, +0, -1dB; 20Hz-50kHz
S/N ratio
More than 104dB
Residual output noise
Less than -70dBu (DIN AUDIO)
Crosstalk
Less than -70dB
Damping factor
More than 350
More than 200
Maximum voltage gain
32dB/26dB/Variable (Selectable)
Input sensitivity
Switch Position: +4dBu
+4dBu
Switch Position: 26B
+13.7dBu
+12.2dBu
Switch Position: 32dB
+7.7dBu
+6.2dBu
Maximum input voltage
+22dBu
Processors
HPF (20Hz/55Hz/OFF, 12dB/Oct)
I/O connectors
Line input/output ports
XLR-3-31 type/ch, Euroblock connector/ch
Speaker output ports
SPEAKON/ch, 5-way binding post/ch
Control ports
D-sub15pin x1
Protection circuit
Load protection
POWER switch ON/OFF mute, DC-fault (Amplifier shuts down automatically),
Clip limiting (THD ≥ 0.5%)
Amplifier protection
Thermal (Mute the output; heatsink temp ≥ 90°C; Operation not restored automatically), VI limiter (Limit the output, RL ≤ 1ohm)
Power supply protection
Thermal (Amplifier shuts down automatically; heatsink temp ≥ 100°C)
Amplifier class
EEEngine
Cooling
Dual variable-speed fan
Power requirements
AC120V, 230V or 240V 50/60Hz
Power consumption
Music source equivalent
650W
Idling
35W
Stand-by
5W
Dimensions
Width
480mm; 18-7/8“
Height
88mm; 3-7/16“
Depth
456mm; 17-15/16“
Net weight
14kg; 30.9lbs
The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)
Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted
This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.
AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:
2 x 1600 Watt rms
Power output stereo 4Ω:
2 x 1100 Watt rms
Power output stereo 8Ω:
2 x 700 Watt rms
Power output bridged 4Ω:
3200 Watt rms
Power output bridged 8Ω:
2200 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
> 102 dB
Crosstalk:
> 65 dB
Distortion (THD+N):
Intermodulation:
Damping factor:
400:1 (8 W)
Slew rate:
50 V/μS
INPUT SECTION
Input connector:
2 x XLR balanced, 6,3mm jack unbalanced
Input sensitivity:
0 / 0.775 dBm/V RMS
Input impedance:
20.000 kΩ
Controls:
Volume control for each channel
OUTPUT SECTION
Output connector:
2 x Neutrik Speakon 4 ways
SYSTEM PARAMETERS
Cooling:
Two-speed fan
Protections:
Thermal, temperature, direct current, short circuit, RFI
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 ~ 50 / 60 V ~ Hz
Max.current:
16 A
Power Consumption:
6500 W
PHYSICAL SPECIFICATIONS
Height:
132 / 5.19 mm/inch
Width:
483 / 19.01 mm/inch
Depth:
455 / 17.91 mm/inch
Net Weight:
29.5 / 65.03 Kg/Lbs
SHIPPING INFORMATION
Package height:
200 / 7.87 mm/inch
Package width:
575 / 22.63 mm/inch
Package depth:
555 / 21.85 mm/inch
Shipping Weight:
32.5 / 71.64 Kg/Lbs
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
%20amplifier%20%20with%20switching%20power%20supply%201200W/70V/100V.%20Protection%20against%20%20overheating,%20overcurrent%20and%20short%20circuit%20output.%20Features%20&%20%20priority%20entry%20program%20(program%20override)%20for%20message%20playback%20%20emergency.%20Highpass%20filter%20OFF/200Hz/400Hz.%20Remote%20control%20function%20ON%20/%20%20OFF.%20Power%20Supply%20DC%2024V,%20AC%20220%20~%20240V%2050/60Hz./p/tdtdpΝέας%20γενιάς%20τελικός%20επαγγελματικός%20ενισχυτής%20υψηλών%20απαιτήσεων.%20Παρέχει%20μεγάλη%20ισχύ%20εξόδου%20και%20υψηλή%20ποιότητα%20ήχου.%20Χρησιμοποιώντας%20την%20επόμενης%20γενιάς%20τεχνολογία%20EEEngine,%20ο%20ενισχυτής%20έχει%20έως%2040%%20μεγαλύτερη%20απόδοση%20και%20χαμηλότερη%20εκπομπή%20θερμότητας%20από%20συμβατικές%20τεχνολογίες%20ενισχυτών.%20Έχει%20διπλούς%20ανεμιστήρες%20ψύξης%20με%20αυτόματα%20ρυθμιζόμενη%20ταχύτητα%20για%20απόλυτη%20ψύξη.%20Διαθέτει%20θήρα%20για%20σύνδεση%20σε%20ψηφιακό%20δίκτυο%20CobraNet%20και%20θύρα%20για%20σύνδεση%20και%20έλεγχο%20λειτουργίας%20με%20surveillance%20system.%20Απόκριση%20συχνότητας%2010%20Hz%20–%2040%20KHz.%20Ισχύς%202%20x%20750%20Watt%20/%208Ω%20RMS,%202%20x%201150%20Watt%20/%204Ω%20RMS,%202300%20Watt%20/%208Ω%20bridge%20RMS.%20Βάρος%2012,5%20κιλά.%20br%20%20%20 br/p/td/trtr%20class= "acrobat_reader_logo."){kind=logo}
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.