ACOUSTIC ENERGY AEGO P5 MKII 5.1 HIFI SYSTEM

System power: 5 x 125 watts for satellite speakers
Decoding: Dolby Digital, DTS and Dolby Pro-Logic II built in
Magnetically shielded
WxHxD (mm) / Weight: Satellites: 68 x 103 x 90
Subwoofer: 268 x 190 x 350
System controller: 228 x 145 x 59
Overall weight: 14.5 kg
Connections: 3 sets of line-level stereo inputs, 1 x coaxial digital input, 1 x optical digital input, 5 x speaker outputs, line-level subwoofer output
Controls: Volume/power level, input
Accessories: Supplied with wall-brackets for all satellite speakers, rubber feet for subwoofer, 2 x 5 metre, 2 x 10 meter and 1 x 3 metre cable runs, remote control batteries, connecting leads and power supplies
Remote control: handset and batteries supplied
Colour: Silver

Dimensions | (Metric) :11-3/8" W x 7-3/4" D x 22-1/8" H | 28.9 x 19.7 x 56.2cm
Driver Complement :Four 6-1/2" cast-basket bass/midrange drivers; Two 1" pure aluminum dome tweeters
Frequency Response :31 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :40 Hz
Packaging :One to a carton
Available Finishes :Piano-Gloss Black
Accessories :Keyhole Hanging Bracket
Inputs :One set of five way binding posts
Warranty :5 Years
Weight | (Metric) :27 lbs | 12.2 kg

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

      T101 / T101c
Design     Two-way closed box
Drive units     115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 100 W
Sensitivity (2.83V/1m)     90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL)     107dB
Impedance     8Ω
Internal volume     0.7 Litres
Weight     1kg (2.2lbs)
Dimensions
(H x W x D)     330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.

Dimensions | (Metric) :9-3/16" W x 5-15/16" D x 14-1/2" H | 23.3 x 15.1 x 36.8 cm
Driver Complement :Two 1 inch aluminum dome tweeters; Two 5-1/4 inch high definition bass-midrange drivers
Frequency Response :45 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 - 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One set of 5 way binding posts
Available Finishes :Matte Black
Weight | (Metric) :12 lbs | 11.3 kg
Packaging :Two to a carton
Warranty :5 Years
Accessories :Keyhole Hanging Bracket

Driver Complements
Satellites
Mid/Woofer     4 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter     4 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Center
Midrange     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Electrical
Overall Frequency
Response     90Hz-24kHz
Lower -3dB Limit     120 Hz
Upper -3dB Limit     20kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     91 dB
Inputs     Gold-plated 5-way binding posts with metal caps
Dimensions
Satellites
Cabinet Size     7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Weight     3.00 lbs. (1.36kgs)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Weight     4.50 lbs. (2.04kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.00 lbs. (9.07kgs)
Speaker Warranty     5 years parts and labor (original purchaser)