Content |
Ενεργό subwoofer 220 mm, ισχύος 200W RMS στα 8Ω, με ρύθμιση έντασης, 35Hz – 180kHz, ενεργό ρυθμιζόμενο crossover, switchable auto-standby και remote control.
LF Unit: One front facing 220mm pulp cone unit
S/N Ratio: >75db
Power Handling: Amplifier 200 RMS into 8 ohms
Overall Frequency Response: 35Hz – 180kHz (crossover)
Cabinet: Real wood veneered. 15mm MDF wrap. Full circumferential brace. High power, low turbulence down firing bass reflex port. 30mm MDF front baffle
Terminals: Line level gold plated RCA phono jacks.
Dimensions: WxHxD 488 x 369 x 365mm
Weight: (exc packaging) 23kg each
|
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Description | Active closed-box subwoofer system |
---|
Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | Amplifier |
| Power output: | 200W | Rated power consumption: | 40W / 0.5W standby | Input impedance: | 33kΩ | Signal / noise: | >90dB | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | Net weight | 12.5kg (27.6 lb) | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | | Product Series Subwoofers
Speaker Type Subwoofer
Frequency Range (+/-3 dB) [Hz] 28 - 190
Maximum SPL [dB] 112
Crossover Frequency [Hz] 40 - 120 Hz
Low Frequency Driver 1 x 12" long stroke Polymere Aluminimum
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Max. Amplifier Power Output [RMS watt] 220
Continous IEC Power Output [RMS watt] 170
Input Impedance [Ω] 25K
Connection input(s) Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding No
Recommended Placement Floor
Near wall or corner
Recommended Distance From Wall [cm] > 5
Functions Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W] 250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm] 370 x 340 x 380
Weight [kg] 14.7
Accessories Included Manual
Rubber Bumpers
Spikes M6
Finish Black Ash Vinyl
Light Walnut Vinyl
White Vinyl |
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5, 10, 15, 20, 25 & 30 minutes Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Complement: 1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input, +12Vdc = On State User's Manual AVAILABLE IN THESE COLOR FINISHES
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg
|
Reviews
There are no reviews yet.