Content | 6 narrow cable channels – discreet cable protection for indoor and outdoor use
Defender® NANO cable crossovers are particularly flat and easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm; besides pedestrian traffic, they also take light-duty vehicles, trolleys and – thanks to their flat profile – even forklift and pallet trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used at carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.
Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don’t hesitate to contact us.
- especially flat, non-slip cable protector made of black, recyclable polyurethane, wheelchair-compatable
- yellow polyethylenelid with high warning effect and secure closure (also available with black lid, Item No. 85150BLK)
- patented, self-cleaning lid hinge
- 6 channels 17 x 18 mm
- load bearing capacity approx. 2t / 20 x 20 cm
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 100 x 28 x 3.2 cm; Weight 4.37 kg
- reliable protection for cables and personnel for indoor and outdoor use
- not suitable for vehicular traffic
- end ramps for secure cable inlet and exit as accessories
Product type
Cable Protectors
Type
6 Channels
Length
1000 mm
Width
280 mm
Height
32 mm
Channels
6
Width channel 1
17 mm
Height channel 1
18 mm
Width channel 2
17 mm
Height channel 2
18 mm
Width channel 3
17 mm
Height channel 3
19 mm
Width channel 4
17 mm
Height channel 4
19 mm
Width channel 5
17 mm
Height channel 5
18 mm
Width channel 6
17 mm
Height channel 6
18 mm
Material
polyurethane
Max. load
ca. 2t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Hardness range
88 ± 4 Shore
Fire protection class
B2
Temperature range
-30 to + 60 °C
Weight
4,37 kg
Special feature
DEKRA-certified |
Rubber matting cable cover - 10m x 1m roll Fine-grooved rubber mat, black, SBR quality, 3 mm thick, width 100cm, length 10m, non-slip, resilient covering for all high traffic areas, weather proof, lies flat, coarsely patterned underside, ideal for protecting cables of all types, matting can be trimmed to the desired size.32.9 kg/Piece |
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Blue pre-drilled Defender Midi cable crossover.
As it is the case with all crossovers of the DEFENDER series, the blue Defender cable crossover is oil, acid, and petrol resistant.
We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.
The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.
DEKRA certified - Certified product safety
1 Set is composed of:
- 6 Ramp pieces (3 Lines)
- 4 extremity pieces (2 left extremities / 2 right extremities)
- 1 blue pre-drilled Midi cable crossover
Please note:
- The Defender Wheelchair Ramp does not support vehicle traffic.
|
- 90° curve for Defender Office
- Colour: Jellow
- Channels: 4
- Channels: 10 mm, 12 mm, 12 mm, 10 mm
- Material: Polyurethane
- Fire protection classification: B1
Technical Drawing - Defender Office [429,2 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
|
Technical drawing - 85002 [356,1 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Cable Crossover with lid load bearing capacity per typical tyre imprint (20 x 20 cm): 5 tons. Crossover lengths are joined by individually available connector plugs. Each crossover is supplied with one pair of connector plugs. The lid closes down onto a patented "interlock zipper" (EU Patent No.: EP1366550) which is moulded into the base and lid - no Velcro to tear off or clog with dirt. A complete range of accessories expands the Defender III into a flexible system to protect your cables and multicores.
- Basic module with approved and patented interlocking lid
- Lenght: 100 cm
- Width: 60 cm
- Height: 7.3 cm
- Channels: 3
- Width (Channels): 52 mm, 45 mm, 56 mm
- Height (Channels): 49 mm, 50 mm, 49 mm
- Flame Class: B2
- Load bearing: Approx 5 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
- 2 connector plugs included
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
End ramp for cable outlet reduces the risk of tripping
|
Reviews
There are no reviews yet.