| Content |
- AFTERMARKET Speaker Diaphragm
- Replacement for several Speaker brands
- Voice coil: 1,75" (44.4mm)
- Ring Diameter : 65.5mm
- Total Diameter: 71.0 mm
- The center distance of the two post terminals : 91.5 m
- Total Length: 107 mm
- Impedance: 8 ohm, DCR: 6 ohm
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
| Model Number |
B40820 |
| VC Diameter |
44.4 mm |
| VC Bobbin Material |
KSV |
| VC Wire |
CCAR |
| Diaphragm Material |
|
| Tracery on Diaphragm Edge |
|
| Diaphragm Out Diameter |
mm |
| Diaphragm Height |
mm |
| Diaphragm Thickness |
0.04 mm |
| RDC |
6Ω |
| Fit Wash Size |
|
| Replacement |
|
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
This genuine JBL replacement diaphragm is compatible with the 2450J, 2446J, and 2447J horn drivers. JBL part number D16R2450.
|
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
Reviews
There are no reviews yet.