Content |
- AFTERMARKET Speaker Diaphragm
- Replacement for several Speaker brands
- Voice coil: 1,75" (44.4mm)
- Diameter : 66 mm
- The center distance of the two post terminals : 70 mm
- Total Length: 80 mm
- Impedance: 8 ohm, DCR: 6 ohm
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
C41531 |
VC Diameter |
44.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR |
Diaphragm Material |
|
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6Ω |
Fit Wash Size |
|
Replacement |
|
|
Replacement diaphragm kit for 44XT™driver
Impulse 1582, HV1582, DTH 4115, DTH 4215, DTH 4210, DTH4115F, DTH 4215F, DTH 4210F, DTH SM Left, DTH SM Right, SP1G,ILS 1564V, SP1X, SP7X, ILS 1564H, ILS 1594V, ILS 1594H,ILS 1264V, QW ML, QW MR, SP7G, ILS 1264H, ILS 1294H,ILS 1294V, QW 1, QW 2, QW 2F, QW 4, QW 4F, Q Factor 2212, SSE 1595
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. |
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Reviews
There are no reviews yet.