| Content |
- AFTERMARKET Speaker Diaphragm
- Replacement for several Speaker brands
- Voice coil: 1,75" (44.4mm)
- Diameter : 66 mm
- The center distance of the two post terminals : 70 mm
- Total Length: 80 mm
- Impedance: 8 ohm, DCR: 6 ohm
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
| Model Number |
C41835 |
| VC Diameter |
44.4 mm |
| VC Bobbin Material |
KSV |
| VC Wire |
CCAR |
| Diaphragm Material |
|
| Tracery on Diaphragm Edge |
|
| Diaphragm Out Diameter |
mm |
| Diaphragm Height |
mm |
| Diaphragm Thickness |
0.04 mm |
| RDC |
6Ω |
| Fit Wash Size |
|
| Replacement |
|
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. |
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
Reviews
There are no reviews yet.