AKG C 3000B Condenser cardioid microphone

209.99 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  Polar pattern: Cardioid Switchable -10dB PAD Frequency response: 20 – 20,000 Hz Max. SPL: 140/150 dB (THD = 0.5%) Electrical impedance: 200 Ohm Requires phantom power Diameter: 53 mm Length: 162 mm Net weight: 320 g Colour: Black Incl. shock mount Highly affordable AKG large-diaphragm microphone technology Cardioid polar pattern for multiplicity of vocal […]

 

Read more

 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 – 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications

The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.

Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\’s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.

An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.

Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AKG C 3000B Condenser cardioid microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG C 3000B Condenser cardioid microphone removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeNEUMANN TLM-49 Condenser studio mic removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P remove
NameAKG C 3000B Condenser cardioid microphone removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeNEUMANN TLM-49 Condenser studio mic removeRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeNEUMANN M-147 TUBE Condenser Cardiodic Microphone removeAKG C414-XLS - Large Diaphragm Condenser Microphone with Five P remove
Image
SKUC 3000BH11RD00002H11NE00032H11RD00025H11NE00019C414-XLS
Rating
Price 209.99 incl. GR VAT 332.00 incl. GR VAT 1,499.00 incl. GR VAT 188.00 incl. GR VAT 2,959.00 incl. GR VAT1,116.00 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 - 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost. Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem. An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)

NT1000 - ?Pure Performance? Ultra Versatile 1? Studio Condenser Microphone.

With its ultra low 6 dBA self-noise and transformer less SMT circuitry, the
R?DE NT1000 exhibits exceptional performance when recording both vocals
and instruments in the studio.
Voiced for ?application versatility?, the NT1000 has been hailed by many as the
ultimate drum over-head and grand piano mic selection. The NT1000 is also
equally at home as a first call vocal mic. With its Australian made 1? HF-2 capsule
incorporating internal shock mounting, the NT1000 boasts a 134 dB dynamic range,
and 140 dBA SPL capabilities and a 20 Hz ? 20 kHz frequency response.
Built of a heavy-duty cast metal satin nickel body, the NT1000 incorporates a
high-strength, heat-treated mesh head, and comes supplied in a zip pouch with a
stand mount.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 1? (25mm) pressure-gradient condenser
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651:
> 88dB (A-weighted, per IEC268-15)
Equvalent noise:
6dB SPL (A-weighted per IEC268-15) +/-1dB
Maximum spl:
> 140dB SPL (@ 1kHz, 1% THD into 1k( load)
Sensitivity:
-36dB re 1V/Pa (16mV @ 94dB SPL) +/-1dB
Dynamic range din iec 651: > 134dB (A-weighted, per IEC268-15)
Power supply voltage: P48 (35V - 53V)
Current consumption: 6mA
Weight without battery: 682 gm
Weight with battery:  882 gm

Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm13 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent noise level, CCIR1)23 dB
Equivalent noise level, A-weighted1)12 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)71 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)82 dB
Maximum SPL for THD 110 dB
Maximum SPL for THD 129 dB
Maximum output voltage for THD -1 dBu
Dyn. range of the mic. amplifier /A-weighted, 0.5 %2))98 dB
Dyn. range of the mic. amplifier /A-weighted, 5 %2))117 dB
Supply voltage (P48, IEC 61938)48 V ± 4 V
Current consumption (P48, IEC 61938)3.2 mA
Matching connectorXLR 3F
Weight825 g
Diameter78 mm
Length165 mm
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal

The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:
Acoustical operating principlePressure gradient transducer
Directional patternCardioid
Frequency range20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm20 mV/Pa
Rated impedance50 ohms
Rated load impedance1000 ohms
Equivalent SPL CCIR 468-324 dB
Equivalent SPL DIN/IEC 65112 dB-A
S/N ratio CCIR 468-370 dB
S/N ratio DIN/IEC 65182 dB
Maximum SPL114 dB for THD
Maximum output voltage8 dBu
Dyn. range of the mic. amplifier DIN/IEC 651102 dB for THD
Supply voltagePower supply N 149 A
Matching connectorMicrophone: DIN 8F, Power Supply: XLR 3F
Weight460 g
Diameter57 mm
Length142 mm
The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices. The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A. The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter. The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty. Features High sensitivity and extremely low self noise Five switchable polar patterns for placement and application flexibility Two-color LEDs provide quick visual indication of selected polar pattern and output overload Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen High sound pressure level capability and wide dynamic range Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors Specifications Type: 1" large diaphragm pressure gradient microphone Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight Frequency Range: 20 to 20,000 Hz Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB) Preattenuation Pad: -6, -12,-18 dB, switchable Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz Power Requirements: 48 V phantom power to DIN/IEC Connector: 3-pin XLR Dimensions: 2" x 1.5" x 6.3“ Net Weight: 10.6 oz Shipping Weight: 5 lbs (2.27 kg)
Weight1.00 kg1.50 kg0.82 kg3.00 kg0.46 kg2.27 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.50 kg
Weight 0.82 kg
Weight 3.00 kg
Weight 0.46 kg
Weight 2.27 kg