AKG C 3000B Condenser cardioid microphone

209.99 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  Polar pattern: Cardioid Switchable -10dB PAD Frequency response: 20 – 20,000 Hz Max. SPL: 140/150 dB (THD = 0.5%) Electrical impedance: 200 Ohm Requires phantom power Diameter: 53 mm Length: 162 mm Net weight: 320 g Colour: Black Incl. shock mount Highly affordable AKG large-diaphragm microphone technology Cardioid polar pattern for multiplicity of vocal […]

 

Read more

 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 – 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications

The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.

Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\’s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.

An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.

Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AKG C 3000B Condenser cardioid microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG C 3000B Condenser cardioid microphone removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone removeAKG PERCEPTION 120 Condenser microphone remove
NameAKG C 3000B Condenser cardioid microphone removeAvantone AV-CK7 Condenser FET mic, inc shock mount, wooden mic box and metal case removeRODE NT-1000 1 STUDIO CONDESER MICROPHONE removeBEHRINGER C3 Dual-Diaphragm Studio Condenser Microphone removeBEHRINGER C1 Studio Condenser Microphone removeAKG PERCEPTION 120 Condenser microphone remove
Image
SKUC 3000BAV-CK7H11RD00002E005253E005249PERCEPTION 120
Rating
Price 209.99 incl. GR VAT332.19 incl. GR VAT 332.00 incl. GR VAT 80.00 incl. GR VAT 57.00 incl. GR VAT 110.00 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

Available on backorder

In stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

AvailabilityIn stock (can be backordered)Available on backorderAvailable on backorderIn stock (can be backordered)Only 1 left in stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content 
  • Polar pattern: Cardioid
  • Switchable -10dB PAD
  • Frequency response: 20 - 20,000 Hz
  • Max. SPL: 140/150 dB (THD = 0.5%)
  • Electrical impedance: 200 Ohm
  • Requires phantom power
  • Diameter: 53 mm
  • Length: 162 mm
  • Net weight: 320 g
  • Colour: Black
  • Incl. shock mount
  • Highly affordable AKG large-diaphragm microphone technology
  • Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost. Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem. An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 140/150 dB (k=0,5%)
Equivalent noise level (CCIR 468-3) 25 dB
Equivalent noise level 14 dB-A
Signal/noise ratio (A-weighted) 80 dB
Preattenuation pad 10 dB, switchable
Bass filter 6 dB/octave below 500 Hz
Impedance 200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption
Connector 3-pin XLR
Finish silver gray
Net weight 320 g / 11.3 oz.
Shipping weight 950 g / 2.1 lbs.
Patent(s) Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)

The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents a commitment to quality, as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 patterns allow the CK-7 to be used in a variety of situations.

The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Applications.

studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic

Specifications

Type: True Condenser
Polar Pattern(s): Cardioid , Omni , Figure 8
Capsule: Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
Frequency Response: 20-20,000 Hz +/- 3dB
Output Impedance:

NT1000 - ?Pure Performance? Ultra Versatile 1? Studio Condenser Microphone.

With its ultra low 6 dBA self-noise and transformer less SMT circuitry, the
R?DE NT1000 exhibits exceptional performance when recording both vocals
and instruments in the studio.
Voiced for ?application versatility?, the NT1000 has been hailed by many as the
ultimate drum over-head and grand piano mic selection. The NT1000 is also
equally at home as a first call vocal mic. With its Australian made 1? HF-2 capsule
incorporating internal shock mounting, the NT1000 boasts a 134 dB dynamic range,
and 140 dBA SPL capabilities and a 20 Hz ? 20 kHz frequency response.
Built of a heavy-duty cast metal satin nickel body, the NT1000 incorporates a
high-strength, heat-treated mesh head, and comes supplied in a zip pouch with a
stand mount.

SPECIFICATIONS:
Acoustic principle:
Externally polarised 1? (25mm) pressure-gradient condenser
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651:
> 88dB (A-weighted, per IEC268-15)
Equvalent noise:
6dB SPL (A-weighted per IEC268-15) +/-1dB
Maximum spl:
> 140dB SPL (@ 1kHz, 1% THD into 1k( load)
Sensitivity:
-36dB re 1V/Pa (16mV @ 94dB SPL) +/-1dB
Dynamic range din iec 651: > 134dB (A-weighted, per IEC268-15)
Power supply voltage: P48 (35V - 53V)
Current consumption: 6mA
Weight without battery: 682 gm
Weight with battery:  882 gm

Behringer C-3 Dual-Diaphragm Studio Condenser Microphone Introducing the Professional Condenser Microphone C-3 from BEHRINGER Our latest dual-diaphragm condenser microphone C-3 is ideal for high-quality studio recording and live applications. The selectable omnidirectional, cardioid, and figure-eight pickup patterns offer ultimate versatility needed to professionally record vocals and acoustic instruments. The C-3 holds a pressure-gradient transducer with a shock-mounted dual-diaphragm capsule. Its ultra-high sound resolution and flat frequency response rival those of microphones with much higher price tags. It also includes an LED that indicates phantom power operation and a gold-plated XLR output connector to ensure highest signal integrity. The C-3 comes with extensive accessories such as swivel stand and transport case. The C-3 represents state-of-the-art technology at a price that is simply unheard of.Behringer C-1 Studio Condenser Microphone   Behringer C-1 Studio Condenser Microphone The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
  • Professional large-diaphragm condenser microphone for unsurpassed audio quality
  • Ideal as main and support microphone for studio and live applications
  • Exceptionally flat frequency response and ultra-high sound resolution
  • Cardioid pickup pattern for outstanding sound source separation and feedback rejection
  • Ultra low-noise transformerless FET input circuitry
  • LED indicates phantom power operation
  • Gold-plated 3-pin XLR output connector for perfect signal transmission
  • Ultra-rugged construction with die-cast body
  • Swivel stand mount and carrying case included
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 0.63" / 16.0 mm
Polar Pattern Cardioid
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 136 dB SPL
Impedance 100 Ohms
Load Impedance 1000 Ohms
Sensitivity -33 dB
THD 1%
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin
Power
Operating Voltage 36 to 52 V
Operating Current Consumption 2.5 µA
Physical 0.93 lb / 0.42 kg
Dimensions ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
 
Live sound
Podcasting Home recording Vocals Musical instruments Perception 120
  • General-purpose cardioid recording microphone
  • Extended frequency response
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Designed and engineered by AKG in Vienna, Austria
The Perception 120 is a 2/3-inch diaphragm true condenser microphone that offers solid build quality, outstanding performance, and excellent value. The low-mass diaphragm delivers a clear sound with accurate sonic detail. A switchable 20 dB preattenuation pad and bass cut filter make the Perception 120 an excellent choice for a wide range of recording and live sound applications. Backed by AKG\'s six decades of experience in making microphones and input from sound engineers around the world, the Perception 120 now brings AKG studio quality to musicians and project studio applications.
Type 2/3\" Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 22 mV/Pa (-33 dBV)
Max. SPL 130/150 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 22 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 72 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance
Recommended load impedance >= 1,000 ohms
Powering
Power requirement 48 V phantom power to DIN/IEC
Connector 3-pin XLR
Finish metallic blue
Dimensions 53 dia. x 165 mm (2.1 dia. x 6.5 in.)
Net weight 525 g (18.5 oz.)
Shipping weight 955 g (33.7 oz.)
Weight1.00 kg0.70 kg1.50 kg0.45 kg0.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.70 kg
Weight 1.50 kg
Weight 0.45 kg
Weight 0.50 kg
Weight 0.50 kg