Content | Technical specifications
Polar pattern |
cardioid |
Frequency range |
50 to 20,000 Hz |
Sensitivity |
20 mV/Pa (?34 dBV) |
Max. SPL |
125 dB (k=1 %) |
Equivalent noise level |
21 dB-A |
Signal/noise ratio (A-weighted) |
73 dB |
Impedance |
600 ohms |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) |
Current consumption |
|
Connector |
Discreet Acoustics Modular standard |
Finish |
matte dark gray |
Dimensions |
13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) |
Net weight |
5 g (0.17 oz.) |
Shipping weight |
88 g (3.1 oz.) |
Accessories (included) |
W 30 |
|
Technical specifications Polar pattern | | hypercardioid | Frequency range | | 50 to 20,000 Hz | Sensitivity | | 20 mV/Pa (?34 dBV) | Max. SPL | | 125 dB (k=1 %) | Equivalent noise level | | 21 dB-A | Signal/noise ratio (A-weighted) | | 73 dB | Impedance | | 600 ohms | Recommended load impedance | | >2000 ohms | Supply voltage | | 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) | Current consumption | | | Connector | | Discreet Acoustics Modular standard | Finish | | matte dark gray | Dimensions | | 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) | Net weight | | 5 g (0.17 oz.) | Shipping weight | | 88 g (3.1 oz.) | Accessories (included) | | W 30 |
|
The e 865 is a fully professional super-cardioid vocal microphone utilising the very best in condenser microphone technology to achieve new standards of quality and sound. The microphone capsule insorporates special blast/pop protiction plate to shield the diaphragm from excessive sound pressure levels. ON/OFF Switch.
- Pick-up pattern : super cardioid
- Sensitivity in free field, no load : (1kHz) 3 mV/Pa
- Max. Sound pressure level (aktiv) : 150 dB
- Nominal impedance : 200 Ohm
- Min. terminating impedance : 1000 Ohm
- Dimensions : d 47 x 193 mm
- Weight : w/o cable 311 g
- Frequency response (microphone) : 40.....20000 Hz
- Phantom powering : 12 - 48 V
|
Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter
One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.
- A standard for acoustic instruments, including guitar and cymbals
- Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
- Built-in, switchable 10 dB attenuator for use in high SPL situations
- Phantom power only
- Windscreen included
- Low noise and high output clipping
- Cardioid condenser
- Frequency response: 20 to 20,000 Hz
|
The Stereo wonder. The new NT4, a visually striking microphone that solves
the age-old problem of stereo recording by eliminating the need to purchase
matched pairs and the associated complex set-up bars and adaptors to get
professional results. With a fixed 90 Deg. X/Y configuration and perfectly
matched stereo condenser capsules, the NT4 lets you record any source with
immaculate stereo detail.
The NT4 has a 128 dB dynamic range, 143 dBA SPL and low self-noise. Offering
selectable battery or phantom power operation with power indicator light, the NT4
is ideally suited to both studio and location recording.
The NT4 comes supplied in a custom carry case with a windshield, XLR to mini-jack
and dual XLR cables for portable DAT or professional balanced input connection.
SPECIFICATIONS:
Acoustic principle:
Stereo Microphone. 90° XY placement. Each side comprises an
externally polarised single diaphragm condenser transducer
Directional pattern: Cardioid per capsule
Frequency range: 20Hz - 20kHz
Output impedance: 200? per side
Signal noise ratio din iec 651: 78dB
Equvalent noise:128 dB
Power supply voltage:
P48 (38V?52V), P24 (20V-26V), P12 (10.8V-13.2V), 9V battery
Current consumption: 4 mA, 2 mA, 2.8 mA, 2.4mA
Weight without battery: 480g
Weight with battery: 2.3kg
|
MC10M is a multi capsule microphone set including a cardioid electret condenser microphone
(MC10) with the replaceable super cardioid capsule, shock mount adaptor, and wind screen.
MC10M can be used in wide applications, from studio & home recording to field sound aquisition.
FEATURES:
Replaceable 2 types of polar pattern capsule, cardioid/super cardioid as standard
Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adaptors, stereo mounting blacket & wind screen as standard
Dedicated carrying case as standard
SPECIFICATIONS:
Type :Back Electret
Condenser Microphone
Polar Pattern :Cardioid/Super Cardioid
Frequency Response :40Hz to 20kHz +/-10dB
Sensitivity :-40dBV/pa (10mv/pa)
Rated Impedance :200W
Equivalent Noise Level
:22dB (A weighted IEC/DIN 651)
Maximum S.P.L. :134dB (THD£0.5%, 1kHz)
Dynamic Range :112dB
Power Supply :48V Phantom Power
(IEC 268-15/DIN45596)
Current Consumption :3.5mA
Dimensions :?20mm x 150mm
Net Weight :130g (MC10 x 1)
Full Package Weight :865g
|
Reviews
There are no reviews yet.