AKG D550 – Cardioid Dynamic Bass Instrument Microphone

Discontinued

124.06 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
The D 550 is a cardioid dynamic microphone. It has been designed primarily as a bass instrument microphone for tough onstage use on bass drum, tuba, trombone, bass amps, etc. The wide frequency response of the D 550 that slightly favors the low frequency and treble ranges ensures a very powerful sound and good intelligibility. […]

 

Read more

The D 550 is a cardioid dynamic microphone. It has been designed primarily as a bass instrument microphone for tough onstage use on bass drum, tuba, trombone, bass amps, etc. The wide frequency response of the D 550 that slightly favors the low frequency and treble ranges ensures a very powerful sound and good intelligibility.

The term “cardioid polar response? means that the D 550 is most sensitive to sound arriving from in front of it, less sensitive to sound arriving from the sides, and least sensitive to sound arriving from the rear. This polar pattern is virtually the same for all frequencies (“frequency independent?). A shock absorbing wire-mesh outer grille and plastic housing protect the the transducer system from damage. The outer steel wire mesh grille and a layer of a special textile material form a very effective windscreen against pop and wind noise.

The D 550 features a standard 3-pin male XLR-type connector. This connector type is internationally standardized so that you can connect the microphone to the rest of your equipment using any commercial microphone cable with a female 3-pin XLR-type connector. The supplied H 440 clamp lets you mount the microphone directly on a snare drum, tom tom, or similar percussion instruments.

Features
High-output neodymium transducer
Cardioid instrument microphone
Designed specifically for bass instruments
Extremely rugged
Mounts on stands or instruments

Specifications

Polar pattern: cardioid
Frequency range: 20?20,000 Hz
Sensitivity: 2.5 mV/Pa (-52dBV re 1V/Pa)
Equivalent noise level: 18 dB-A (DIN 45412)
Max. sound pressure level for 1 %/3 % THD: 147/156 dB SPL
Electrical impedance: =600 Ohms
Recommended load impedance: =2,000 Ohms
Connector: 3-pin male XLR
Finish: matte black enamel
Size: 104 mm (4.09 in.) H x 121 mm (4.76 in.) L x 46 mm (1.81 in.) ?
Net/shipping weight: 203/563 g (7.2 oz./1.2 lb.)

Weight 0.56 kg

Reviews

There are no reviews yet.

Be the first to review “AKG D550 – Cardioid Dynamic Bass Instrument Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG D550 - Cardioid Dynamic Bass Instrument Microphone removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeAKG C 451B B/ST Matched Pair removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeNPG CB-410 Instrument Microphone 48V removeShure DMK57-52 - Drum Mic Kit remove
NameAKG D550 - Cardioid Dynamic Bass Instrument Microphone removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeAKG C 451B B/ST Matched Pair removeSHURE KSM-141SL - Dual Pattern Instrument Microphone 20Hz to 20k removeNPG CB-410 Instrument Microphone 48V removeShure DMK57-52 - Drum Mic Kit remove
Image
SKUD550BETA 52AC 451B STEREO PAIRKSM141SLCB-410DMK57-52
Rating
Price 124.06 incl. GR VAT 231.36 incl. GR VAT 917.03 incl. GR VAT 515.99 incl. GR VAT 47.11 incl. GR VAT 627.00 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

In stock

Only 1 left in stock (can be backordered)

AvailabilityOut of stockOnly 1 left in stock (can be backordered)Available on backorderIn stockIn stockOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The D 550 is a cardioid dynamic microphone. It has been designed primarily as a bass instrument microphone for tough onstage use on bass drum, tuba, trombone, bass amps, etc. The wide frequency response of the D 550 that slightly favors the low frequency and treble ranges ensures a very powerful sound and good intelligibility.

The term "cardioid polar response? means that the D 550 is most sensitive to sound arriving from in front of it, less sensitive to sound arriving from the sides, and least sensitive to sound arriving from the rear. This polar pattern is virtually the same for all frequencies (“frequency independent?). A shock absorbing wire-mesh outer grille and plastic housing protect the the transducer system from damage. The outer steel wire mesh grille and a layer of a special textile material form a very effective windscreen against pop and wind noise.

The D 550 features a standard 3-pin male XLR-type connector. This connector type is internationally standardized so that you can connect the microphone to the rest of your equipment using any commercial microphone cable with a female 3-pin XLR-type connector. The supplied H 440 clamp lets you mount the microphone directly on a snare drum, tom tom, or similar percussion instruments.

Features
High-output neodymium transducer
Cardioid instrument microphone
Designed specifically for bass instruments
Extremely rugged
Mounts on stands or instruments

Specifications

Polar pattern: cardioid
Frequency range: 20?20,000 Hz
Sensitivity: 2.5 mV/Pa (-52dBV re 1V/Pa)
Equivalent noise level: 18 dB-A (DIN 45412)
Max. sound pressure level for 1 %/3 % THD: 147/156 dB SPL
Electrical impedance: =600 Ohms
Recommended load impedance: =2,000 Ohms
Connector: 3-pin male XLR
Finish: matte black enamel
Size: 104 mm (4.09 in.) H x 121 mm (4.76 in.) L x 46 mm (1.81 in.) ?
Net/shipping weight: 203/563 g (7.2 oz./1.2 lb.)

Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

  • Identical acoustics of the legendary CK 1.
  • Rugged construction.
  • Ruler-flat on-axis frequency response.
  • Precise, nearly frequency independent cardioid.
  • Extremely accurate signal transfer.
  • Transformerless output stage for minimum distortion at low frequencies.
  • Protected against electrostatic and magnetic interference.
  • Selectable 10-dB and 20-dB preattenuation pads.
  • Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
  • Operates on phantom power to DIN/IEC between 12 V and 48 V.
  • Complete with SA 40 stand adapter and W 90 windscreen.
  • Each microphone comes with its own individual frequency response plot.

Specifications:

  • Polar pattern: Cardioid
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 9 mV/Pa (-41 dBV)
  • Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
  • Equivalent noise level (CCIR 468-3): 29 dB
  • Equivalent noise level: 18 dB-A
  • Signal/noise ratio (A-weighted): 76 dB
  • Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
  • Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
  • Impedance: 1000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN 45596
  • Current consumption:
The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. Features
  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application. Suggested Applications Acoustic Guitar Acoustic Bass Cymbals Brass/Woodwinds Orchestra Ensemble Vocals Piano Strings Room Ambience Live Recording

Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string  musical instruments

The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.

  • Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.

  • A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments.
  • Weight0.56 kg0.80 kg2.00 kg0.50 kg1.00 kg2.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.56 kg
    Weight 0.80 kg
    Weight 2.00 kg
    Weight 0.50 kg
    Weight 1.00 kg
    Weight 2.00 kg