Content | The DMS300 Instrumental Set is a digital radio system for instruments and presentations. It consists of a radio microphone and a pocket transmitter. The system is free of registration and charges worldwide as it operates in the 2.4 GHz frequency range. Thanks to the uncompressed radio transmission with 24 bit/48 kHz, the audio quality is constantly high. To protect confidential content, the signal is encrypted with secure listening during transmission.
Both instruments and microphones can be connected to the pocket transmitter. A connection cable for guitar or bass is included in the delivery. The duration of the transmitter is up to 12 hours and that with only 2 AA batteries. The battery status of the pocket transmitter is displayed on the receiver as well as on an LCD display on the transmitter.
The operation of the DMS300 system is very simple. An available frequency is automatically detected and set. In order to avoid interference with the radio transmission by WLAN and Bluetooth devices, the receiver changes the radio frequency as soon as overlaps are detected. The receiver is equipped with two antennas for reliable transmission. Up to eight DMS300 systems can be synchronized and operated in parallel.
A rack mounting kit (RMU-40) is available as an option. For proper operation, the distance between transmitter and receiver should not exceed 30 m. |
Technical Data
RF frequency range 518..... 866 MHz
Transmission/receiving frequencies 1440
Presets 4
Switching bandwidth 36 MHz
Peak deviation +/- 48 kHz
Compander HDX
Frequency response (microphone) 40.....18000 Hz
Signal-to-noise ratio > 110 dB(A)
THD, total harmonic distortion
In compliance with ETS 300422 , ETS 300445 , CE , FCC
Antenna connector 2 BNC, 50 Ohm
Audio-XLR connector 6,3 mm
Audio output level (balanced) XLR: +18 dBu max
Audio output level (unbalanced) Jack: +12 dBu max
Power supply 10,5 - 16 V DC battery AA (Mignon)
Dimensions (Receiver) 212 x 145 x 38 mm
Weight (Receiver) 1100 g
RF output power 30 mW
Power supply 2x 1.5 V battery AA (Mignon)
Operating time (transmitter) > 8 h
Input voltage range 1,8 V line
Input voltage range 2,4 V line
Dimensions (Transmitter) 82 x 64 x 24 mm
Weight (Transmitter) 158 g
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Polycarbonate Stompbox-style System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 118 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1 | Compatible Channels | 6 | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required |
|
- Ultra-compact, lightweight and rugged magnesium housing.
- 64 MHz wide bandwidth.
- Dual-antenna diversity design eliminates signal dropouts and enhances RF stability.
- lightweight, exceptionally durable magnesium alloy bodypack case.
- LCD screen displays audio & RF metering, battery status bar, group & channel, R/L balance.
- Selectable stereo, mono or mixed output mode.
- PLL-synthesized technology enables large compatible channels operation.
- ACT syncs the transmitter & receiver frequency automatically.
- Menu controls and indicators accessed by three buttons.
- S/N ratio > 95dBA (stereo receiving).
- 95dB stereo separation.
- 20 Hz ~ 15 kHz Frequency Response.
- 0.1% @ 1kHz distortion.
- Earphone output power 120mW @ 16Ω.
- Extended operating hours with 2 AA alkaline batteries.
- Dual unbreakable soft antennas.
Frequency Range
|
480~824 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Compatible Channels & Preset Channels
|
12 compatible channels in group 1-10
16 compatible channels in group 11-16
Testing channels in group 17
16 user-defined channels in group 18
216 preset channels
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
± 0.005% (-10 ~ +60℃)
|
Sensitivity
|
10μV input level, S/N > 90dB (Stereo)
|
Modulation Mode
|
Digital Modulation
|
Receiving Mode
|
Diversity Receiving
|
Channel Set-Up
|
ACT Sync
|
Spurious
|
|
T.H.D
|
0.1%@1 kHz
|
Max. S/N ratio
|
95 dBA (Stereo)
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
Stereo Separation
|
> 95 dB
|
Volume Control
|
126 dB (1dB step)
|
LCD Display
|
audio & RF metering, battery status bar, group & channel, R/L balance
|
Output Jack
|
3.5 mm Ø stereo earphone jack
|
Output Power
|
2 × 120 mW @ (16Ω)
|
Earphone Impedance
|
≧ 16 Ω
|
Power
|
2 "AA” Alkaline batteries
|
Current Consumption
|
Approx. 170 mA
|
Operating Time
|
Approx. 8 hours with 2 AA alkaline (stand-by)
|
Dimensions (W × H × D)
|
63 × 82 × 23 mm (2.6 × 3.2 × 0.9 ")
|
Net Weight
|
Approx. 98 g (3.5 oz) excluding batteries
|
Transmitter
|
MI-909T
|
Operating Temperature
|
-10 ~ +60℃
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
| Achieve onstage mobility at the touch of a button!
Set yourself free with the Alesis GuitarLink Wireless system. Compact, clear sounding, and easy to use, GuitarLink Wireless provides unrestricted action as you move about the stage with your guitar or bass. The unique receiver is battery powered, and small enough to sit anywhere—even in your pedalboard!
ALL-IN-ONE TRANSMITTER
Powered by two AAA batteries, the GuitarLink Wireless transmitter is compact and unobtrusive, so it wonʼt interfere with your playing. The attached cable plugs directly into your guitar or bass. Using the integrated metal clip, the GuitarLInk Wireless transmitter can attach to either your strap, or right to your belt for added comfort.
COMPACT RECEIVER
Unlike bulkier wireless receivers, the GuitarLink Wireless receiver is compact, and is also powered by two AAA batteries. This rare combination provides added versatility, so you can put the receiver almost anywhere. Set it on top of your amp. Mount it to your pedalboard. Place it in your effects rack. The GuitarLink Wireless receiver is ready for anything. Bypass the batteries with the external power adapter for a more permanent setup.
EFFORTLESS AND EFFICIENT
The GuitarLink Wireless system operates in the reliable 2.4 GHz frequency spectrum to provide a clear signal free from interference. After turning both units on, simply press the Pairing buttons on both units to make the connection |
Reviews
There are no reviews yet.