| Content | The AKG GN 30 E 38 cm Gooseneck With Integrated 3 Pin XLR PP adapter. Good modular gooseneck, includes a theft-proof XLR panel mount socket.
The AKG GN 30 E gooseneck microphone with integrated XLR phantom power adapter for temporary installation and PS 3 F-Lock panel mount socket. This gooseneck can often be seen in use on lecterns and desks in houses of worship and conferences. The AKG GN30E is approximately 38 cm (15 in.) long and has an in-line XLR phantom power adapter (DPA) permanently attached to the gooseneck. The DPA adapter has an integrated 200 Hz bass rolloff filter and LED ON/OFF jumper. It is supplied with a useful theft-proof XLR panel mount socket (PS 3 F-Lock). The GN 30 E connects to any standard mixer input with 9 to 52 V power supply. This gooseneck requires an AKG capsule module (not included) e.g an AKG CK 31, CK 32, CK 33, CK 47 or CK 80.
The main features of the AKG GN 30 E include:
- Rugged construction
- Highly reliable contacts for capsule modules
- Integrated LED ring status indicator
- Integrated, switchable bass cut
- Integrated XLR connector
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: =2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Current consumption:
|
Accessory kit for AT899-TH models (beige) includes clothing clip base, viper clip base, magnet base, three single holders, two double holders, two element covers and two windscreens. |
The D1015CMB metal base ensures secure positioning of gooseneck microphones and offers a female 3-pole XLR connector on the top side and a 3-pole XLR male connector on the back. |
The HM 1000 is a microphone hanging module that accommodates capsules from the AKG Discreet Acoustic Modular series and provides for hanging them with a thin 33 ft. (10 meter) cable. The end of the cable is terminated with a mini-XLR connector which will pass through an 11-mm diameter opening and is subsequently plugged into the Discreet Power adapter (DPA). Using microphones flown from the ceiling to record music or speech in places of worship, conference rooms, or on theater stages is becoming more and more popular.
The HM 1000 operates over the range of 9 to 52 volts DC. A red LED power indicating ring at the capsule end of the cable tells the operating engineer that the system is receiving power. The LED is normally powered from phantom power, but can be operated by an alternative DC power source such as the AKG B18. The LED maybe extinguished by removing a jumper located inside the DPA. The DPA also contains a jumper-actuated low frequency roll-off below 250 Hz.
The HM 1000 is ideal in multiples for overhead choral pickup and is virtually invisible at typical distances. The capsule assembly may be set to any direction or angle by means of a flexible but stable wire as shown in the photograph. The cable is black, and the capsule assembly is matte gray.
Features:
- Hanging module with rugged thread connection and self-cleaning, gold plated contacts
- Compatible with 5 different AKG capsule modules CK 31, CK 32, CK 33, CK 47 and CK 80
- Integrated switchable LED indication
- Integrated bass roll-off
- Rugged design
- Non-reflective ray colour
- Included Accessories: Phantom power adapter, hanging clip
Specifications:
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: =2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Current consumption:
|
HY-PF1B
RIGGING FRAME FOR INDOOR USE | DAP AUDIO TS-332 Table or Wall base for Gooseneck BLACK |
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.