Content |
Info
Up to 50 mW output power for long range Noiseless ON/OFF switch Powered by a single dry or rechargeable AA size battery Long battery life (14 hours with lithium batteries, 6 hours with single AA size dry battery, 8 hours with optional high performance rechargeable battery) for low operating cost Infrared data download from receiver for instant setup Battery capacity display Battery status information transmitted to receiver Integrated charging contacts for charging batteries inside transmitter Available with legendary D 5 or C 5 microphone element
| |
Artist Elite® AE3300 cardioid condenser capsule with integral shock mount Available in the following frequency bands: 541.500 - 566.375 MHz (C Band) 655.500 - 680.375 MHz (D Band) 721.500 - 746.375 MHz (G Band) 25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments Two-stage pop filter to protect against "p” pops Dual output power selection to optimize battery life Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver High efficiency dual companding system for flawless audio Function menu displayed in a backlit LCD window and controlled by internal touch switchesFour nameable user presets Operates on two AA batteries Battery fuel gauge LCD readout on the body of the microphone Power/mute lock provision Dual-colour power/mute status indictor 18 dB audio input level adjustment Integral capsule 6 dB pad switch Rugged metal housing with integral antenna Supplied with a heavy-duty microphone stand clamp RF Power Output: High: 35 mW; Low: 10 mW, nominal Spurious Emissions: According to National Regulations Dynamic Range: >=110 dB, A-weighted Microphone Element: Cardioid Condenser Batteries: Two 1.5V AA alkaline (not included) Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern Dimensions: 239mm long, 50mm diameter Net Weight: 270g Accessory Included: AT8456a Quiet-Flex™ stand clamp
|
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
PT 4000
UHF bodypack transmitter with magnesium body
30 MHz wide UHF band with up to 1200 selectable frequencies
Backlit display and jog switch for ease of use
Operates for up to 15 hours on dry batteries, 12 hours on optional BP 4000 battery
pack and displays remaining battery life
Optional remote mute switch
The PT 4000 is a professional bodypack transmitter with a rugged die-cast magnesium
body. The 30 MHz wide UHF band provides up to 1200 selectable frequencies and
several preset frequency banks for various countries make it easy to set up a multichannel
system. A backlit display makes it very easy to tune the PT 4000 to the same frequency
as the SR 4000 receiver. A pilot tone system continuously transmits transmitter status
data including MUTE switch position and the remaining battery life to the receiver. Integrated
charging contacts let you charge the optional BP 4000 battery pack without having to
remove it from the transmitter.
An optional remote mute switch allows the user to mute the transmitter without having
to fumble for the on-board mute switch if the transmitter is hidden in the clothes.
Available microphones for PT 4000: C 411 L, C 416 L, C 417 L, C 418 L,
C 419 L, C 420 L, C 444 L, C 477 WR L, CK 55 L, CK 77 WR L,
CK 97-CVR WL
SPECIFICATIONS:
Carrier frequency range 650 to 680, 680 to 710, 720 to 750, 760 to 790,
790 to 820, 835 to 862 MHz
Modulation FM
Audio bandwidth 35 to 20,000 Hz
Selectable channels 1200
Max. channels for multichannel operation > 50
THD typ. |
The FP1 Bodypack Transmitter features a lightweight and durable design for use with TA4F-connection microphones including lavaliers and headsets.
Ideal for use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Automatic transmitter setup that instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, and low battery
Audio input gain for adjustment of audio level
4-Pin microphone input jack for use with lavaliers or headset microphones with TA4F connectors
Gain Adjustment Range
−10 to +20 dBV
Input Impedance
1 MΩ
RF Output Power
10 to 30 mW (varies by region)
Pin Assignments
TA4M
1: ground (cable shield)
2: + 5 V Bias
3: audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.), without batteries
Housing
Molded polycarbonate case
Power Requirements
2 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
|
Reviews
There are no reviews yet.