| Content |
AKG WMS40PT WIRELESS BODYPACK/GUITAR SYSTEM
The AKG WMS40PT contains an AKG SR40 UHF receiver,
an AKG PT40 bodypack transmitter with a guitar lead,
Power Supply Unit, and Batteries.
UHF operates in a higher frequency range than VHF systems.
The VHF range is very highly populated with traffic, and because
the VHF signal has a longer wave length, VHF radio signals pass
through non-metallic walls easier than a UHF signal, making VHF
wireless systems more prone to radio interference. Though more
expensive than VHF wireless, UHF is well worth the extra cost.
AKG WMS40PT SR40 UHF RECEIVER
The AKG SR40 UHF receiver contains an adjustable squelch for
noise free reception and output level control permits optimum signal
matching to subsequent equipment. Professional outputs include a
XLR and 1/4" jack. Rugged half-rack case for standalone or rackmounted
operation. The plug & play concept and fixed preset frequency let you set
up and operate the AKG SR 40 quickly and efficiently.
Carrier frequency range: 710 to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 to 20,000 Hz.
THD: 0,8 % typ.
Signal/noise ratio: 108 dB (A) typ.
Power supply: 120/230 V AC, 50/60 Hz, 95 ±15 mA.
Audio outputs: balanced XLR and unbalanced TS 1/4" jack,
adjustable from mic to line level, 2 V rms max.
Dimensions: 235 x 142 x 43 mm (9.3 x 5.6 x 1.7 in.).
Net weight: 470 g (1 lb.).
AKG WMS40PT PT40 BODYPACK UHF TRANSMITTER
The AKG WMS40 Series PT40 bodypack transmitter allows you to
connect everything from lavalier or head-worn microphones to a guitar,
bass, or portable keyboard. In spite of its light weight and small size,
the AKG PT 40 operates for more than 35 hours off a single set of batteries,
so its operating cost is the lowest in its class. An input gain control, noiseless
on/mute/off switch, and professional mini XLR input provide maximum reliability
and ease of use in every application. Set to LINE leve for an instrument input,
and MIC for a microphone input. A belt clip makes it easy to attach the AKG PT 40
to clothes or instrument straps.
Carrier frequency range: 710 MHz to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 - 20,000 Hz.
Selectable channels: 1 fix frequency.
Max. channels for multichannel operation: 7.
THD: 0.8% typ.
Signal/noise ratio: 103 dB (A) typ.
Power supply: 2 x 1.5 V AA size batteries.
RF output: 10 mW typ. (ERP).
Battery life: >35 hours (dry batteries).
Dimensions: 96 x 64 x 22 mm / 3.8 x 2.5 x 0.9 in.
Net weight: 76 g / 2.7 oz.
| Features / Specification:
Dual channel plug-and-play wireless
1 handheld transmitter and one belt-pack transmitter with instrument cable
30 hours of operation from a single AA battery
Receiver offers two balanced outputs on 1/4 inch jack connectors
Fixed frequency on channels ISM2/3 |
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
|
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
| |
Bandwidth
|
64 MHz
| |
Oscillation Mode
|
PLL-Synthesized
| |
Channel Grid
|
25 kHz
| |
Frequency Stability
|
±0.005% (-10~+60℃)
| |
Modulation Mode
|
Digital Modulation
| |
Output Power
|
10 ~ 100 mW (country dependent)
| |
Spurious Rejection
|
| |
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
| |
T.H.D.
|
| |
ADC Dynamic Range
|
112 dBA
| |
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
| |
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
| |
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
| |
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
| |
Impedance
|
≧ 16 Ω
| |
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
| |
Antenna Connector
|
TNC (50 Ω impedance)
| |
Power Supply
|
DC 12~15V
| |
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
| |
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
| |
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| | Polycarbonate Stompbox-style System | | Transmission Format | Line 6 proprietary digital audio transmission | | Frequency Response | 10Hz - 20kHz | | Dynamic Range | 118 dB | | RF Carrier Frequency | 2.4GHz | | Operating modes | RF1 | | Compatible Channels | 6 | | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | | FCC Approval | Part 15 approved, no user-license required |
|
Set composed of:
- 1 x LDWIN42R2
- 2 x LDWIN42BP
- 2 x LDWS100MH3
Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.
With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).
The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.
The rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.
- UHF frequency range 734 - 776 MHz
- 1680 frequencies
- 20 groups with 577 fixed frequencies
- user bank with 1680 freely selectable frequencies in 25 kHz increments
- 255 addresses selectable
- channel scan
- true diversity receiver
- interchangeable microphone capsules (dynamic / condenser)
Receiver display
- volume
- radio frequency level antenna A/B
- audio level
- battery status of transmitter
- transmitter sync via infrared
- squelch setting in menu
- equalizer setting in menu
- naming template in menu
- 10 sets storable
- lockable menu
- balanced XLR output, unbalanced 6.3 mm jack
- adjustable output
- adjustable headphone output
Transmitter Display - battery status
- RF power
- AF power
- additional system information
Technical Specifications WIN42 Receiver - Model Name: LDWIN42R
- Channels: 1680 (20 groups + 1 user group)
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- THD:
- Signal/Noise ratio: >100 dB
- Audio Output: XLR balanced / 6,3 mm Jack unbalanced
- Power Supply: external power adapter 13,5 V DC, 500 mA
- Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter - Model Name: LDWIN42MD
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Power requirement: 2 x AA size batteries
- Operating time: >13 h with alkaline batteries
- Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter - Model Name: LDWIN42BP
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Input Connector: mini XLR 3-pole (phantom power for headset)
- Power requirement: 2 x AA size batteries
- Operating time: >14 h with alkaline batteries
- Dimensions (W x H x D): 87 x 25 x 63 mm
| The sense of freedom that comes with a wireless kit can't be beaten. The freedom to move around the stage during a song, the ability to walk out across the floor during sound check to hear how your band sound to the audience, that moment where you end standing proudly on the bar amidst a cheering crowd. Wireless kits give you so much more choice when performing. (cheering crowd and irritated bartender sold separately)
Even if leaping from the stage isn't for you, the WMS 40 is still a great choice for sound. AKG have a great reputation for quality and tone. Crystal clear sound and high end transmission and receiving technology means no loss of sound quality, a common issue with some cheaper wireless kits.
Plug and Play
The WMS40 Mini wireless microphone system provides crystal clear sound and is a true plug'n'play solution. Up and running in a second, it is the optimum wireless solution for small stages, clubs, places of worship, hotels, and gyms. The system is available in different application optimized set packages, all of which includes a universal, switched mode power supply for worldwide operation.
Long lasting
The WMS40 Mini system stands out for its extremely long battery life of 30 hours with a single AA battery which helps saving money in the long run
Dual input/output
Unlike a lot of wireless kits that only handle 1 signal at a time the Mini2 allows you to either have 2 guitars setup and ready with the same reciever or to give the spare trnasmitter to your second guitarist/ bass player. This means less equipment to carry around and less clutter on stage. You can even make quick guitar changes with each running through an independant channel. No more unclipping and unplugging your transmitter while the audience waits.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
- The WMS 40 Mini2 Instrumental Set Dual ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR input allows you to connect every compatible AKG miniature microphone. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 PT 40 MINI bodypack transmitters, 2 MKG L instrument cables, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
Features
- Up to 30 hours playtime with one single AA battery
- Plug and Play
- Gain control on pocket transmitter
- Compatible with all AKG MicroMics
- Low battery indicator
Specifications
Audio
- Audio Frequency bandwidth 40 to 20000 Hz
- Signal to Noise 110 dB-A
- THD at 1 kHz 0.8 Prozent
- Operating temperature range -10 to 55 Celsius
- Radio Sensitivity -100 dBm
- Recommended simultaneous channels 3
- Number of selectable frequencies 1 Fixed frequency
- Frequency Selection Fixed frequency
- Radio Range (Line of Sight) 20m
- Modulation FM
- Transmitter Synchronization: Not necessary
- HiQnet compatible No
- Racksize 1/3 Racksize (19“)
- Rackheight 1 RU
Outputs
- Amount 2
- Type Balanced Jack (1/4“)
- Gender Female
- Contacts 3-pin
- Note Balanced audio output adjustable from mic to line level. Output level at rated deviation: 500 mV rms
Power
- Type DC Socket
- Voltage 12 to 12 V
Design
Dimensions / Weight
- Length 132 mm
- Height 43 mm
- Width 133 mm
- Net Weight 581 g
Optional microphones for PT 40 Mini |
Reviews
There are no reviews yet.