| Content |
AKG WMS40PT WIRELESS BODYPACK/GUITAR SYSTEM
The AKG WMS40PT contains an AKG SR40 UHF receiver,
an AKG PT40 bodypack transmitter with a guitar lead,
Power Supply Unit, and Batteries.
UHF operates in a higher frequency range than VHF systems.
The VHF range is very highly populated with traffic, and because
the VHF signal has a longer wave length, VHF radio signals pass
through non-metallic walls easier than a UHF signal, making VHF
wireless systems more prone to radio interference. Though more
expensive than VHF wireless, UHF is well worth the extra cost.
AKG WMS40PT SR40 UHF RECEIVER
The AKG SR40 UHF receiver contains an adjustable squelch for
noise free reception and output level control permits optimum signal
matching to subsequent equipment. Professional outputs include a
XLR and 1/4" jack. Rugged half-rack case for standalone or rackmounted
operation. The plug & play concept and fixed preset frequency let you set
up and operate the AKG SR 40 quickly and efficiently.
Carrier frequency range: 710 to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 to 20,000 Hz.
THD: 0,8 % typ.
Signal/noise ratio: 108 dB (A) typ.
Power supply: 120/230 V AC, 50/60 Hz, 95 ±15 mA.
Audio outputs: balanced XLR and unbalanced TS 1/4" jack,
adjustable from mic to line level, 2 V rms max.
Dimensions: 235 x 142 x 43 mm (9.3 x 5.6 x 1.7 in.).
Net weight: 470 g (1 lb.).
AKG WMS40PT PT40 BODYPACK UHF TRANSMITTER
The AKG WMS40 Series PT40 bodypack transmitter allows you to
connect everything from lavalier or head-worn microphones to a guitar,
bass, or portable keyboard. In spite of its light weight and small size,
the AKG PT 40 operates for more than 35 hours off a single set of batteries,
so its operating cost is the lowest in its class. An input gain control, noiseless
on/mute/off switch, and professional mini XLR input provide maximum reliability
and ease of use in every application. Set to LINE leve for an instrument input,
and MIC for a microphone input. A belt clip makes it easy to attach the AKG PT 40
to clothes or instrument straps.
Carrier frequency range: 710 MHz to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 - 20,000 Hz.
Selectable channels: 1 fix frequency.
Max. channels for multichannel operation: 7.
THD: 0.8% typ.
Signal/noise ratio: 103 dB (A) typ.
Power supply: 2 x 1.5 V AA size batteries.
RF output: 10 mW typ. (ERP).
Battery life: >35 hours (dry batteries).
Dimensions: 96 x 64 x 22 mm / 3.8 x 2.5 x 0.9 in.
Net weight: 76 g / 2.7 oz.
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| | Polycarbonate Stompbox-style System | | Transmission Format | Line 6 proprietary digital audio transmission | | Frequency Response | 10Hz - 20kHz | | Dynamic Range | 118 dB | | RF Carrier Frequency | 2.4GHz | | Operating modes | RF1 | | Compatible Channels | 6 | | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | | FCC Approval | Part 15 approved, no user-license required |
|
Evolution wireless D1 Instrument-Set with CL1 cable for live stage use. Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission. |
Reviews
There are no reviews yet.