AKG WMS 40PT NON DIV.WIRELESS BODYPACK-GUITAR SYSTEM

AKG WMS40PT WIRELESS BODYPACK/GUITAR SYSTEM

The AKG WMS40PT contains an AKG SR40 UHF receiver,
an AKG PT40 bodypack transmitter with a guitar lead,
Power Supply Unit, and Batteries.

UHF operates in a higher frequency range than VHF systems.
The VHF range is very highly populated with traffic, and because
the VHF signal has a longer wave length, VHF radio signals pass
through non-metallic walls easier than a UHF signal, making VHF
wireless systems more prone to radio interference. Though more
expensive than VHF wireless, UHF is well worth the extra cost.

AKG WMS40PT SR40 UHF RECEIVER
The AKG SR40 UHF receiver contains an adjustable squelch for
noise free reception and output level control permits optimum signal
matching to subsequent equipment. Professional outputs include a
XLR and 1/4" jack. Rugged half-rack case for standalone or rackmounted
operation. The plug & play concept and fixed preset frequency let you set
up and operate the AKG SR 40 quickly and efficiently.

Carrier frequency range: 710 to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 to 20,000 Hz.
THD: 0,8 % typ.
Signal/noise ratio: 108 dB (A) typ.
Power supply: 120/230 V AC, 50/60 Hz, 95 ±15 mA.
Audio outputs: balanced XLR and unbalanced TS 1/4" jack,
adjustable from mic to line level, 2 V rms max.
Dimensions: 235 x 142 x 43 mm (9.3 x 5.6 x 1.7 in.).
Net weight: 470 g (1 lb.).

AKG WMS40PT PT40 BODYPACK UHF TRANSMITTER
The AKG WMS40 Series PT40 bodypack transmitter allows you to
connect everything from lavalier or head-worn microphones to a guitar,
bass, or portable keyboard. In spite of its light weight and small size,
the AKG PT 40 operates for more than 35 hours off a single set of batteries,
so its operating cost is the lowest in its class. An input gain control, noiseless
on/mute/off switch, and professional mini XLR input provide maximum reliability
and ease of use in every application. Set to LINE leve for an instrument input,
and MIC for a microphone input. A belt clip makes it easy to attach the AKG PT 40
to clothes or instrument straps.

Carrier frequency range: 710 MHz to 865 MHz.
Modulation: FM.
Audio bandwidth: 40 - 20,000 Hz.
Selectable channels: 1 fix frequency.
Max. channels for multichannel operation: 7.
THD: 0.8% typ.
Signal/noise ratio: 103 dB (A) typ.
Power supply: 2 x 1.5 V AA size batteries.
RF output: 10 mW typ. (ERP).
Battery life: >35 hours (dry batteries).
Dimensions: 96 x 64 x 22 mm / 3.8 x 2.5 x 0.9 in.
Net weight: 76 g / 2.7 oz.

VWTTM

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.


Superior specs.

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation.

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander free.

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

System Specifications
Operating Frequencies: UHF band

Band C: 541.500 MHz to 566.375 MHz (996 frequencies)

Band D: 655.500 MHz to 680.375 MHz (996 frequencies)

Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)

Not all frequencies are available in all areas. Please check with local regulations.

Minimum Frequency Step: 25 kHz

Modulation Mode: FM

Maximum Deviation: +/-35 kHz

Dynamic Range: > 110 dB (A-weighted), typical

Total Harmonic Distortion:
Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

Operating Temperature Range: -5o C to +45o C (23o F to 113o F)

Battery and LCD performance may be reduced at very low temperatures.

Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)

Receiver
Receiving System: True diversity

Image Rejection: 60 dB nominal, 55 dB minimum

RF Sensitivity: 20 dBuV at 60 dB S/N ratio

Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV

Antenna Input: BNC-type, 50 ohms

Bias voltage 12V DC, 60 mA, each

Power Requirements: 12-18V DC, 500 mA

Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.

Net Weight: 1.1 kg (38.8 oz), without accessories

Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Body Pack
RF Power Output    High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Spurious Emissions: Following federal and national regulations

Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V

Batteries: Two 1.5V AA, not included

Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)

Depending on battery type and use pattern.

Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H

Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in

Free yourself! for live sound, presentations and installations The WMS420 wireless microphone system provides a highly flexible as well as easy to use solution. The ultra high frequency system is set up within seconds and is equally suitable on stage as well as in locations where a single- or multi channel solution is needed.

The entire WMS420 wireless system consists of the SR420 stationary receiver, HT420 handheld transmitter and the PT420 pocket transmitter. The HT420 handheld transmitter is available with the patented D5 dynamic microphone acoustic. This capsule guarantees maximum rejection against feedback, reduced handling noise and the famous AKG sound. Both transmitters are shipped with charging contacts that enable the use of rechargeable batteries. Moreover the transmitters offer exceptional eight hours of operation time from a single AA size battery, which dramatically reduces the operating costs in day-to-day use.

The detachable receiver antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi channel systems. The WMS420 series includes three different bodypack sets. The head-worn set includes the high performance C555L condenser microphone. The presenter set includes the professional C417L lavalier microphone. The guitar set includes an instrument cable. With the AKG WMS420 system up to eight channels can be run simultaneously.

Detachable receiver antennas
enable the use of professional RF accessories

Patented state-of-the-art D5 dynamic capsule
cuts through the mix

Transmitters with charging contacts
saves money in day-to-day use and preserves the environment

Compatible with all AKG MicroMics
almost all applications can be covered

Low battery warning indicator
for secure operation

• EIA-standard half 19” metal case.
• Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
• LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
• Lockable front panel.
• PLL-synthesized technology enables multiple preset compatible channels.
• 64MHz bandwidth.
• 112 dBA S/N ratio.
• Balanced and unbalanced audio inputs.
• Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
• Built-in 3 bands EQ settings.
• Selectable encryption keys.
• Scan for an open, interference-free frequency.
• 6.3mm headphone monitoring jack.
• RJ-11 MIPRO ACT-BUS connector.
• Up to 100mW output power. selectable Hi, Low or Off setting.
• TNC 50Ω RF output & input connectors.