Content | * 6 Dual stereo inputs, 2 with mic inputs
* RIAA preamps for up to 4 turntables
* Input selectors with 2 colour indicators
* Smooth action level controls
* 2 Stereo aux sends with pre/post switching
* 4 band EQ - high definition of frequency bands, with ʽinfinite killʼ on HF and LF; wide Q for cut, narrow Q for boost
* MIDI output from VCF 1+2, crossfader, LFO 2 (MIDI clock), dedicated data control and start/stop button
* Large ʽlight-pipeʼ illuminated cue switches
* 9 led 3 colour channel ʽbulls eyeʼ LED meters
* Crossfader and Filter assign switches
* Either smooth travel 60mm VCA faders or rotary VCA faders (Linear or Rotary versions)
* Active Penny & Giles VCA crossfader allowing contour to be set from smooth to scratch mix
* Cue/Mix monitor balance control
* 2 Independent mix outputs
* 2 Rotary master level controls
* Dual stereo analogue VCF effects
* 3 Filter modes combine for more effects
* Independent frequency sweep controls
* Resonance control for subtle or wild effects
* Filter LFO Depth and tempo controls
* Illuminated Filter switches punch effect in or out
* Powerful headphones monitor with auto cue
* Headphones split cue and Aux 1 & 2 monitoring
* Stereo music only booth monitor output
* Booth mono and mute switching
* 9 led 3 colour main ʽbulls eyeʼ LED meters
* Balanced +4dBu XLR stereo Mix 1 output
* Impedance balanced Line stereo Mix 2 output
* Pre-fade recording output
Technical Data
Outputs:
2 Independent mix outputs
Mix 1:Balanced 0dBu XLR stereo Mix 1
Mix 2:Impedance balanced Line stereo Mix 2 output
Booth monitor: Stereo music only
MIDI output from VCF 1+2
2 Headphone (6,3 mm/ 3,5 mm) | D2320_MANUAL_GB_V1.pdf
• Mic input with Comp/Limit
• USB Player with pitch control
• Display with ID3 Text
• Direct MP3 / Phone input
• 2 Masters & Monitor outputs
Compact 6.2 is the ideal mixer for sport instructors. It has 2 microphone inputs with built-in compressor limiters and high-pass filters. This will help the instructor to have the correct level and perfect intelligibility. Dynamic range will be extended and distortion will be eliminated. It has one selector to choose the audio source which can be the internal USB mp3 player, the front input or 2 line inputs at the back panel. The MP3 player has ID3 text and can be pitched which is ideal for fitness, spinning and all kinds of group work outs. The front input can be used for a normal line level but also can be switched into a special Phone mode which adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. It has 2 master outputs with separate volume controls which can be locked and a separate monitor volume especially for the instructor. All technical settings like EQ, Gain, Phantom Power, Compression & Treshold are on the backside of the unit to be set by the installer. Now the instructor only has to set his source and mic level and doesn't need to worry about difficult settings. The Compact 6.2 is an all-in-one solution for your sport instructor, it's easy in use and has all features which are needed to give a work out instruction without worrying about anything else but the audience.
Specifications
Input channels: 2 x Microphone, combo XLR/Jack 2 x Line, RCA, 1 x Phone, 3,5mm jack / RCA
Output channels: 1x Master A RCA, 1x Master B, Balanced XLR & RCA, 1x Monitor RCA
USB supported format: FAT up to 16Gb
Audio format: MP3 128kbps, 192kbps, 224kbps, 256kbps, 320kbps
Master EQ: 80Hz, 2,5KHz, 12KHz, -6dB / +6dB
Frequency response: 20Hz - 20Khz
T.H.D.: | Xone:96. The long-awaited follow-up to a genuine club classic.
A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.
It’s all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.
Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.
Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.
Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.
Xone96: You mixed. We listened.
- Type Analogue
- Channels 6 + 2
- EQ
Channel 1-4, 4-Band EQ
Channel A-B, 3-Band Parametric EQ
- USB Soundcards Dual 24 Channel (12 in / 12 out)
Hi-Speed USB2.0 / Mac Class Compliant
32bit / 96kHz
MIDI over USB
- Line Inputs 4 x RCA (CH 1-4)
4 x 1/4″ TRS (CH A-D) Mono/Stereo
- Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS
- USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
- Mic Input 2 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x 1/4″ TRS (Balanced)
- Booth Output 1 x 1/4″ TRS (Balanced)
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Out 1 x 5-Pin DIN
- Send/Return I/O
2 x 1/4″ TRS Send
4 x 1/4″ TRS Return
1 x LN/Hi-Z Switch (SND1/RTNA)
- Filter
2 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A-B
CRUNCH (Controlled Harmonic Signal Distortion)
- X-Link 1 x RJ45
- Headphones
2 x 1/4″
2 x 3.5mm
Split Cue Monitoring
- Channel Faders 60mm VCA / Replaceable
- Chanel Meters 9 Segment LED
- Channel Fader Curve 3 Types
- X-Fader InnoFADER / 45mm VCA / Replaceable
- X-Fader Curve 3 Types
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 45W max
- Mains Adaptor 3 pin IEC socket
- Height 109mm / 4.3″
- Width 336mm / 13.25″
- Depth 410mm / 16.2″
- Weight 7kg / 15.4 lbs.
|
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
Power consumption: |
30 W |
Inputs: |
DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
Impedance: |
1 kohms |
Minimum input voltage: |
1.5 mV RMS |
LINE 1-5: |
stereo RCA |
Impedance: |
27 kohms |
Minimum input voltage: |
150 mV RMS |
PHONO 1,2: |
stereo RCA |
Impedance: |
47 kohms |
Minimum input voltage: |
3 mV RMS |
Outputs: |
MASTER: |
stereo RCA, stereo XLR (3-pin) |
ZONE: |
stereo RCA |
Impedance: |
400 ohms |
Output voltage: |
1 V RMS/ 0 dB |
REC: |
stereo RCA |
Impedance: |
5 kohms |
Output voltage: |
225 mV RMS |
Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
Tone control (DJ MIC): |
1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
Tone control (channels 1-5): |
5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
S/N ratio: |
>80 dB |
Frequency range: |
20-20,000 Hz |
Distortion: |
0.02% |
Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
Weight: |
4 kg |
|
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
| 4 Channel Analogue
DJ Mixer
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.
The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.
With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.
Features
• 4 channels with phono/line inputs
• VCF Filter system – low-pass, high-pass and band-pass filters plus frequency and resonance controls
• 3-band EQ
• External FX loop (Send/Return) system with dry/wet control per channel
• Mic input on balanced XLR, with 2-band EQ
• Balanced main mix out on XLR
• Independent booth out
• Record out
• 3.5mm and 1/4″ headphone outputs
• Touring grade build quality
• Super smooth VCA channel faders
• User changeable crossfader
• Innofader compatible
• Crossfader curve switch
• 20dB pro standard headroom
• 9-segment signal level monitoring |
Reviews
There are no reviews yet.