The Phase Checker allows fast testing of the polarity of acoustic transducers, microphones and electronic devices. Sophisticated signal processing allows fast and accurate determination of the absolute polarity unimpaired by passive crossovers or signal waveform distortions produced by the device under test. The test system consists of two units: the Signal Generator and the detector. […]
The Phase Checker allows fast testing of the polarity of acoustic transducers, microphones and electronic devices. Sophisticated signal processing allows fast and accurate determination of the absolute polarity unimpaired by passive crossovers or signal waveform distortions produced by the device under test.
The test system consists of two units: the Signal Generator and the detector.
To check acoustical or electrical phasing, the Generator is connected to the input of the device under test whereas the detector picks up the output signal. Subsequent signal processing enables the detector to decide whether the device under test reverses signal phase or not. The result of the test procedure is displayed via two LEDS, the green one indicating the “in phase” and the red one indicating the “out of phase” condition.
Due to the versatile Input/Output structure of both the Generator and the detector any combination of acoustical and electrical input and output may be realized.
Generator Both acoustical and electrical output. XLR output connector may be switched to either 2 or 3 hot. Adjustable output level with 41 – position detented pot. Floating low-impedance balanced output. Loudspeaker direct drive capability. Integrated high-effeciency loudspeaker. Detector Both acoustical and electrical input. 3 position input selector: MIC-LINE-MIC ext. XLR input may be switched to either 2 or 3 hot, floating balanced – unbalanced. Integrated condenser type microphone. Epoxy encapsulated shock-proof ciruitry. 2 LED coloured display. Specifications Rugged die-cast enclosure. Exclusive use of high-grade components, e.g. gold-plated switches, for maximum riliability. Power supply (each device): 1 PP3 size 9 V battery. Battery life: 50 hours using alkaline cells. Generator Output level: > + 6 dBv peak Min. source impedance: < 10 Ohms Puls spectrum covers entire audio frequency range. Detector Line input impedance: 10 KOhm Mic. ext. input impedance: 1 KOhm Min. MIC input voltage: 10 mV Min. LINE input voltage: 250 mV Max. LINE input voltage: 50 V
Weight
3.00 kg
Reviews
There are no reviews yet.
Be the first to review “ALPHATON PC-100 POLARITY CHECKER” Cancel reply
The Phase Checker allows fast testing of the polarity of acoustic transducers, microphones and electronic devices. Sophisticated signal processing allows fast and accurate determination of the absolute polarity unimpaired by passive crossovers or signal waveform distortions produced by the device under test.
The test system consists of two units: the Signal Generator and the detector.
To check acoustical or electrical phasing, the Generator is connected to the input of the device under test whereas the detector picks up the output signal. Subsequent signal processing enables the detector to decide whether the device under test reverses signal phase or not. The result of the test procedure is displayed via two LEDS, the green one indicating the "in phase" and the red one indicating the "out of phase" condition.
Due to the versatile Input/Output structure of both the Generator and the detector any combination of acoustical and electrical input and output may be realized.
Generator Both acoustical and electrical output. XLR output connector may be switched to either 2 or 3 hot. Adjustable output level with 41 - position detented pot. Floating low-impedance balanced output. Loudspeaker direct drive capability. Integrated high-effeciency loudspeaker. Detector Both acoustical and electrical input. 3 position input selector: MIC-LINE-MIC ext. XLR input may be switched to either 2 or 3 hot, floating balanced - unbalanced. Integrated condenser type microphone. Epoxy encapsulated shock-proof ciruitry. 2 LED coloured display. Specifications Rugged die-cast enclosure. Exclusive use of high-grade components, e.g. gold-plated switches, for maximum riliability. Power supply (each device): 1 PP3 size 9 V battery. Battery life: 50 hours using alkaline cells. Generator Output level: > + 6 dBv peak Min. source impedance: < 10 Ohms Puls spectrum covers entire audio frequency range. Detector Line input impedance: 10 KOhm Mic. ext. input impedance: 1 KOhm Min. MIC input voltage: 10 mV Min. LINE input voltage: 250 mV Max. LINE input voltage: 50 V
This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.
We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair.
Features
6-position rotary selector with individual LEDʼs for up to five pins plus internal battery life check
ʽBananaʼ connector continuity tester with beeper and LED indicator
Super-rugged construction for durability and longer life
(2) Speaker Twist connectors for testing of 4 pin->to pin connections
(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
(2) RCA Phono connectors for testing of 2 pin->to pin connections
(2) BNC connectors for testing of 2 pin->to pin connections
(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
(2) 1/4” TRS connectors for testing of 3 pin->to pin connections
(2) Banana connectors for testing of 1 pin->to pin connections
Specifications
Power Requirements
9V battery (Battery not included)
Dimensions
3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
User's ManualA stage is only as good as its cables — and the AHMCT 8 sets the record straight.
The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage.
The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands.
The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.
Solid metal housing
Powered by a 9-V block battery
Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
Additional continuity tester with measuring probes
Optical display and buzzer
Product type Test Equipment
Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR
Controls down , Power On/Off , up , volume
Indicators battery status , LED chain
Operating voltage 9 V block
Acoustic continuity test yes
Test cable yes
Cabinet material sheet steel
Cabinet surface powder coated
Width 105 mm
Depth 145 mm
Weight 0,64 kg
This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.
Digilyzer? DL1
Digital audio analyzer / audio meter with integrated speaker, audio lens and a
comprehensive event logger. Digital audio becomes simple by using the Digilyzer DL1.
The digital audio meter Digilyzer DL1 provides a comprehensive set of analysis
functions for digital, audio and video related audio signals.
It handles virtually all digital audio formats including ADAT and sampling frequencies
up to 96 kHz. The simple and intuitive operation allows the user to monitor, analyze
and troubleshoot any digital signals.
Debugging of digital audio signals becames easy with the assistance of the Digilyzer:
Features like the integrity check, the integrated speaker with audio lens function, the
logging functions, the ?over all? view of all important parameters and many more functions
to allow you to understand whats going on and finding faults easier than ever.
The Digilyzer is a handheld, battery powered device with optional mains power supply and
optional USB interface called MiniLINK.
MiniLINK, the USB interface for the Digilyzer allows documentation and data acquisition of
all DL1 functions in conjunction with the easy to use MiniLINK PC application. MiniLINK
supports online data logging up to several days. Read more about MiniLINK.
Product-details
? AES3, S/PDIF, TOS-Link
? ADAT Interface
? Sampling Frequency 32-96 kHz
? Digital Audio Analysis
? Carrier Status Analysis
? Carrier Signal Measurement
? Dual Domain Monitor Speaker
? Comprehensive Event Logger
Details
The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system.
The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.
Specifications
• Designed to set in an amp rack to view your decibel level
• Creates a great light show in your amp rack
• Display progresses from green through amber to red
• Sensitivity adjustment on both left and right channels
• 2 separate modes: dot and bar
• Includes 5V power supply
• Line Inputs: Left & Right RCA / Left & Right XLR
• Line Outputs: Left & Right RCA / Left & Right XLR
• Voltage Operation: DC 5V, 500mA Power Supply included
• Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm
• Weight: 2.5 lbs. / 1.25kg.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's Manual
Reviews
There are no reviews yet.