ALTRONICS P0767 XLR In Line Isolation Cable 30cm

37.20 incl. GR VAT

In stock

EAN: 9321758226070
Installments calculation
CompareAdd to wishlist Submit Better Price
Connects inline to reduce signal noise and hum. Isolated XLR male to XLR female and XLR male Altronics Code: P0767 Barcode: 9321758226070 Shipping Weight: 0.17000Kg

 

Read more

Connects inline to reduce signal noise and hum. Isolated XLR male to XLR female and XLR male
  • Altronics Code: P0767
  • Barcode: 9321758226070
  • Shipping Weight: 0.17000Kg
Weight 0.52 kg

Reviews

There are no reviews yet.

Be the first to review “ALTRONICS P0767 XLR In Line Isolation Cable 30cm”

Your email address will not be published. Required fields are marked *

Quick Comparison

ALTRONICS P0767 XLR In Line Isolation Cable 30cm removeOMNITRONIC LH-065 ACTIVE D.I BOX removeALPHATON SM-60 ACTIVE D.I BOX removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removePALMER AUDIO PAN01 Passive DI-box removePALMER AUDIO PAN04 TOOLS Passive DI Box - 2 channels remove
NameALTRONICS P0767 XLR In Line Isolation Cable 30cm removeOMNITRONIC LH-065 ACTIVE D.I BOX removeALPHATON SM-60 ACTIVE D.I BOX removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removePALMER AUDIO PAN01 Passive DI-box removePALMER AUDIO PAN04 TOOLS Passive DI Box - 2 channels remove
Image
SKUP0767LH065SM-60PAN03PAN01PAN04
Rating
Price 37.20 incl. GR VAT 77.67 incl. GR VAT 113.09 incl. GR VAT 292.43 incl. GR VAT 52.07 incl. GR VAT 93.00 incl. GR VAT
Stock

In stock

In stock

In stock

Available on backorder

Only 5 left in stock (can be backordered)

Available on backorder

AvailabilityIn stockIn stockIn stockAvailable on backorderOnly 5 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentConnects inline to reduce signal noise and hum. Isolated XLR male to XLR female and XLR male
  • Altronics Code: P0767
  • Barcode: 9321758226070
  • Shipping Weight: 0.17000Kg

Active DI-Box SM-60

The electronic Direct-Injection Box SM-60 allows direct connection of electronic
music instruments such as keyboards, synthesizers, electric and electronic pianos,
etc. with mixing consoles in PA-systems and in recording studios.
The SM-6 is designed for applications, where a passive DI-Box does not perfom
satisfactorily, i.e., where the output level of a passive DI-Box is too low for the microphone
input section of the mixing desk.
Because the input impedance of the SM-6 is above 5 MOhm, instrument outputs are
not loaded or in any other way adversely affected. The voltage ratio from input to output
is 1: 1 and is always sufficient for connection with any microphone input. Input connectors
are 1/4" phone jacks, output connector is a Switchcraft D3M; output is 600 Ohms,
transformer balanced. The output level may in certain cases overload microphone inputs -
the line input section of the mixing console must then be used for connecting the SM-6.
The unit operates with a 9 V battery or phantom powering from 24 to 48 volts.

Technical Data

input impedance > 5 MOhm
max. input impedance + 6 dBu, 1,55V
ouptut impedance 600 Ohm
frequency response 20 ... 20000 Hz, ± 0,2 dB
gain 1 : 1
THD < 1 % at 30 Hz
       < 0,7 % bei 40 Hz
powering  9-V battery (IEC 6LF22) or
                 phantom power 24 ... 48 V.
inputs  two 1/4" phone jacks , unbalanced
          (one being used as output to instruments amp)
outputs  XLR, balanced
             pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 240 g
dimensions 113 x 71 x 37 mm

Palmer PAN 03
19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Product type DI Boxes
Type active
Channels 4
Inputs 4
Input connectors 6.3 mm jack
Max. input level + 45 dBu
Input impedance (@ 60 Hz) 1 M Ohm(s)
Input pad 0 / -30 dB
Outputs 4 (+ 4 parallel XLR outs)
THRU outputs/channel 1
Output connectors 6.3 mm jack , XLR
Max. output level + 10 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 20000 Hz
Transformer balanced Yes
Ratio 10 : 1
Indicators Power
Controls attenuator , ground lift
Operating voltage external
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 "
Depth 90 mm
Height 45 mm
Height 1 U
Weight 1,6 kg

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

Product type DI Boxes
Type passive
Channels 1
Inputs 1
Input connectors 6.3 mm Jack
Max. input level + 54 dBu
Input impedance (@ 60 Hz) 60k Ohm(s)
Input pad 0 / -30 dB
Outputs 1
THRU outputs/channel 1
Output connectors 6.3 mm Jack , XLR
Max. output level + 4 dBu
Output impedance 600 Ohm(s)
Frequency response 20 - 20000 Hz
Transformer balanced yes
Ratio 10 : 1
Controls attenuator , ground lift
Cabinet material sheet steel
Cabinet surface powder coated
Width 110 mm
Depth 73 mm
Height 42 mm
Weight 0,34 kg

 

2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Specifications
  • No. of channels: 2
  • Passive/Actibe: Passive
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Input/Output Gain: -20 dB
  • Ground lift switch: Yes
  • Max Input Level: +54 dBu
  • Max Output Level: +4 dBu
  • Frequency Range  2K Source Imp. -1dB: 10 Hz - 40 kHz
  • Input Impedance  60Hz: 60 kΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 110 x 45 mm
Weight0.52 kg0.80 kg0.24 kg1.90 kg0.34 kg0.47 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.52 kg
Weight 0.80 kg
Weight 0.24 kg
Weight 1.90 kg
Weight 0.34 kg
Weight 0.47 kg