The American DJ Entour Faze is a water-based fog machine that creates 1000 ft³/minute of haze for misty atmospheres designed to enhance patterns from your light show in theaters, clubs, houses of worship, and more.
Offered as an alternative to oil-based fog machines, it features a 450W heating element that continually reheats to ensure a stable temperature. The result is an even mist right out of the machine rather than big bursts of cloudy fog that could obscure your lights.
Other features include an LED heating-status indicator, an automatic circuit cutoff to protect the pump if the fog fluid tank runs dry, and a convenient carrying handle. Operate the Entour Faze using the built-in manual controls or via the included Entour VT-1 wired remote, which has a 25′ cable with a 1/4″ connector. The Entour Faze also supports DMX control with its three DMX channel modes (1, 2, and 4) and XLR 3-pin I/O. A dual hanging bracket system is supplied to allow for precise positioning.
Water-based fog machine offered as an alternative to oil-based machines
Outputs 28.3 m³ or 1000 ft³/minute of thin haze
Rapid heater technology enables a short heat-up time of 40 seconds
Automatic circuit cutoff to protect pump if fog fluid tank runs dry
LED heating indicator system—red (heating), green (ready to use)
Fluid Consuption 270ml/Hour – 3L external fog fluid tank
F4L ECO water-based fog fluid recommended by American DJ
Convenient carrying handle and safety eye loop
Includes Entour VT-1 wired remote with output volume control, red and green status indicators, and a 25′ cable
Includes dual hanging bracket system that allows machine to be angled in an optimum position
Fog Output
1000 ft³ / 28.3 m³ per minute
Tank Capacity
0.8 gal / 3 L
Warm-Up Time
40 seconds
Compatible Fluid
Water-based fog fluid
Fluid Consumption
4.5 mL/minute
Heater
450 W
DMX Connectors
Input: XLR 3-pin male
Output: XLR 3-pin female
DMX Channel Modes
1, 2, and 4
Power Requirements
120 VAC, 60 Hz
Power Consumption
465 W
Dimensions
16.3 x 8.0 x 11.9″ / 41.4 x 20.2 x 30.3 cm
Weight
10 lb / 4.5 kg
Weight
5.5 kg
Reviews
There are no reviews yet.
Be the first to review “American DJ Entour Faze 450W Fog Machine, Thin Haze Water Based Liquid DMX” Cancel reply
Produces fine, translucent haze without nebulizing the room at the same time
Adjustable timer with interval and duration
Continuous activation via handy transmitter
Simultaneous control of several machines possible via transmitter
Removable tank with illumination and level indication
Operates on standard water-based fluid
Rugged metal housing
Short warm-up time
Output distance: Approx. 2,5 m
Can be operated in 1 CH mode
Controlling by DMX; Wireless remote control; wired remote control
Preprogrammed in Light´J
For application areas such as: Stage
Content
The American DJ Entour Faze is a water-based fog machine that creates 1000 ft³/minute of haze for misty atmospheres designed to enhance patterns from your light show in theaters, clubs, houses of worship, and more.
Offered as an alternative to oil-based fog machines, it features a 450W heating element that continually reheats to ensure a stable temperature. The result is an even mist right out of the machine rather than big bursts of cloudy fog that could obscure your lights.
Other features include an LED heating-status indicator, an automatic circuit cutoff to protect the pump if the fog fluid tank runs dry, and a convenient carrying handle. Operate the Entour Faze using the built-in manual controls or via the included Entour VT-1 wired remote, which has a 25' cable with a 1/4" connector. The Entour Faze also supports DMX control with its three DMX channel modes (1, 2, and 4) and XLR 3-pin I/O. A dual hanging bracket system is supplied to allow for precise positioning.
Water-based fog machine offered as an alternative to oil-based machines
Outputs 28.3 m³ or 1000 ft³/minute of thin haze
Rapid heater technology enables a short heat-up time of 40 seconds
Automatic circuit cutoff to protect pump if fog fluid tank runs dry
LED heating indicator system—red (heating), green (ready to use)
Fluid Consuption 270ml/Hour - 3L external fog fluid tank
F4L ECO water-based fog fluid recommended by American DJ
Convenient carrying handle and safety eye loop
Includes Entour VT-1 wired remote with output volume control, red and green status indicators, and a 25' cable
Includes dual hanging bracket system that allows machine to be angled in an optimum position
Haze emission and fan speed individually adjustable in 100 increments
2-channel DMX control and standalone functionality
Integrated fluid canister drawer
Whisper-quiet operation
Ideal for TV, motion pictures, theaters, discotheques and live events
Enhances any light show
Ready for the road, the Instant Series Hazer 1500 T Pro comes in a tough and durable touring case. With a huge output capacity of 1020 m³ per minute, extremely short pre-heating time of 45 seconds only and whisper-quiet operation it is ideal for portable applications in TV and motion picture productions, fashion shows, live events and mobile discotheques.
The highly efficient, microprocessor-controlled haze machine features a long-life vapor tube of grade 316 stainless steel and automatic self-cleaning mechanism to prevent residue build-up and minimize maintenance. The unit's haze emission and projection fan speed are individually variable in 1% increments to suit stages and venues of any size, fluid consumption at 100% output is a low 17 ml per minute.
The Hazer 1500 T Pro is capable of 2-channel DMX control and standalone operation providing 3-pin and 5-pin XLR inputs and outputs for the DMX signal. The rugged construction sports a 3-segment LED display, a fluid drawer for canisters up to 5 liters and overheating protection. Producing a very fine, long-lasting mist the Cameo Hazer 1500 T Pro is the perfect choice to enhance moving light shows for impressive atmospheric effects.
For best results, use only Cameo Instant Haze Fluid, which is specially designed for Cameo Hazer. Using other fluids will void the warranty and can damage the device.
Product type
Fog and Wind Machines
Type
hazer
Power
1500 W
Max. Output
1020 m³/min
Warm-up Time
45 sec.
Fluid Consumption
17 ml/min (100% Output)
DMX input
XLR 3-pin male , XLR 5-pin male
DMX output
XLR 3-pin female , XLR 5-pin male
DMX mode
2-channel
DMX Functions
fan , Vapour Volume
Standalone modes
fan , Vapour Volume
Controls
Start/Stop/Mode , Value Down , Value Up
Indicators
3-segment LED display
Operating voltage
240 V AC, 50 Hz
Power consumption
1500 W
Overheating Protection
heating element with thermostat
Power connector
Power cord with safety plug (Type E / CEE 7/7)
Cabinet colour
Black
Recommended Fluid
INSTANT HAZE (not included)
Total dimensions
Width
415 mm
Height
266 mm
Depth
555 mm
Weight
18,648 kg
MDG Atmosphere H.O. Haze Machine 1415W
Extremely quiet output with the longest hanging times
? Continuous or momentary haze emission
? Automatic Purging System (APS) to prevent build-up and clogging
? Compatible with remote control timer and DMX interface
? Detachable remote control and 8 m (26 ft) cable included
Increased output for larger venues Extra-large fluid capacity (6.5 L/1.7 US gallons) Up to 60 hours of running time
ATMOSPHEREAPS H·O· 110 ml (3.7 oz) 0.36 kg (0.8 lb) 6.5 L (1.7 US gallon) Standard feature Pure white 0.5-0.7 microns 60 hours 8 minutes MDG Neutral Fluid 115 or 230 VAC, 50/60 Hz 1,415 W 48.8 dB (A) 81 cm (32?) 28 cm (11?) 30 cm (12?) 30 kg (66 lb) 45 kg (95 lb) CE approved, CSA and UL pending
Eurolite NH30 MKII Hazer effect fog machine.
The compact Eurolite NH-30 MK2 DMX fog machine with 720 Watt is best suited for small stages and produces fine and transparent fog with an output range of 2.5 meters.
The device is equipped with an adjustable timer with interval and duration. It is controlled via an on/off cable remote control, radio transmitter or DMX;
Up to several devices can be controlled simultaneously with the radio transmitter.
The device is operated with conventional water-based fog fluid and has a filling volume of 1.2 litres. The Nebefluid tank is removable.
The robust metal housing is equipped with a carrying handle for easy transport. There is an elongated gap on the side of the housing to check the level of the fog fluid.
The Jem K1 Hazer is Martinʼs top-of-the-line hazer for high performance applications where a high level of reliability and easy serviceability is required. Feature-rich and of solid construction, the Jem K1 provides the ideal combination of continuous operation, long hang time, and low fluid consumption for greater economy.
Designed for service ease
Continuous output
Output and density level control
5000 m³/min haze output
Integrated high velocity fan (variable fan speed)
600 W heat exchanger
2.5 liter fluid capacity
Low fluid consumption and longer hang-time for greater economy
Water based - no oil residue on light fixtures
Automated shut-down procedure to prevent clogging
On-board DMX, 3 & 5 pin
On-board control panel
Fast access set-up mode
Optional digital remote control
Silent Mode
Eco mode extends run time and improves fluid economy
Robust yet small and lightweight, the JEM Compact Hazer Pro is a versatile haze machine designed for the highly demanding professional market. Its ability to produce exceptional atmospheric haze effects in a short period of time while operating at low noise levels make it ideal for nearly any application from shows and events to theatre, TV studios, clubs, cruise ships, theme parks and more.
Ultra-fast 1 minute ready time
Shutdown cycle to prevent clogging
Actors\' Equity/Broadway League ApprovedSpecificationsPerformance
Coverage volume: 3800 m3 (134,196 ft3) per hour
Operating time with 2.5 l of fluid (min/max): 20/70 Hours
Ready time: 1-minute
Continuous effect output
Construction
Housing: Steel & aluminum
Color: Black
Airflow control: Optional Air Director
Heat exchanger: 900 W, thermally protected
Blower fan: Integrated, 200-2500 RPM
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
Connections
AC Power: Neutrik PowerCON
DMX, link mode in/out: 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Exterior surface temperature: 30° C (86° F)
Maximum nozzle temperature: 290° C (554° F)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.