Content | Replacement stylus for AIWA , SHARP turntables and more.
Quality aftermarket replacement turntable needle
Specs:
Spherical Diamond Tip needle 0.7 mil
Tracking Force: 1.5 - 2.5 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Transperant Grey
Suitable for
Audio Technica: ATN3830
AIWA : AN2, AN-2, AN-77, AN-77DY, AN77DY, PXE990, LX50, DXD1, LX-120 LX120 LX-20 LX20 LX-30 LX30 LX-80 LX80
V-1200ASL V1200ASL V-200 V200 V-200W V200W V-250W
V250W V-250MKII V-350MKII V350MKII V-800A V800A V-800W
V800W V-800X V800X V-850 V850 V-850W V850W
Columbia: DSN63 Del Monico ALE58BK , ALE77 , DT56 , DT65E , LE30(B) , W77 , X5
DENON: DSB 63
Diatone: 3D-51M , 3D-55M , M220
FISHER: MODEL 2500 , 8600 , 8660D , 8690D , 8740 , AVS2100 , MT250 , MT8690 , MT870 , MT885R , MT890 , ST103SD
Hitachi: LO-D , DS-ST16, DA6000 , HTMD46 , MD007R , MD1200 , MD22 , MD500
JVC ALE58BK , DT56 , DT65E , LE30(B) , W77, X5
KENWOOD KD68F LO-D DA6000 , DS-ST16 , HTMD46 , MD007R , MD1200 , MD22 , MD500, KD-4020 KD4020
Marantz MX673 , MX683 , TT285 , TT873
Mitsubishi 3D-51M , 3D-55M, M220
Nivico ALE58BK , ALE77 , DT56 , DT65E , LE30(B) , W77 , X5
Optonica STY124
Otto ST103SD
Sanyo ( see Fisher) ST103SD
Sharp STY124 Sony ND153G
Trio KD68F Victor ALE58BK , ALE77 , DT56 , DT65E , LE30B , W77 , X5
These are high-quality replacement styluses that are in no way inferior to the original.
Note: Please identify your stylus from the illustrations. The designations differ considerably depending on the manufacturer and only refer to the most commonly used types. The color is not decisive, it is important that the design matches.
| Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A |
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Technical data |
|
Frequency range |
20-29.000 Hz |
Frequency response |
20-20.000 Hz + 2 / -0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15,0 mN) |
Tracking angle |
20° |
Stylus colour |
Bronze |
|
|
Recommended for following cartridges |
2M BRONZE |
| Stylus 2M Red
Technical data |
|
Frequency range |
20-22.000 Hz |
Frequency response |
20-20.000 Hz + 3 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Red |
|
|
Recommended for following cartridges |
2M Red |
*) Typical value |
Ortofon 14 Stylus Technical Data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 2 / - 2 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 25 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,0-1,5 g (10-15 mN)
Tracking force, recommended 1,25 g (12,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges TM 14U |
|
Reviews
There are no reviews yet.