Content | CM6E is a dual cone built-in 6.5” 100 volt loudspeaker suitable for almost any installation. This budget-friendly loudspeaker will deliver a loud and clear sound reproduction. The CM6E has several power tappings (6 – 3 – 1.5 watts) and is the ideal speaker for the distribution of microphone calls and background music.
The housing is made of high quality ABS. The grille is made of steel and the loudspeaker has a 6.5” paper dual cone woofer. The loudspeaker is easy to install, due to its simple, quick mounting system with 3 screws. | |
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | n/a | Rated Input | 6W (high impedance) | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16) | Impedance (100V Line) | 1.7kΩ (6W), 3.3kΩ (3W) | Impedance (70V Line) | 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W) | Impedance (25V Line) | 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W) | Low (Adjustable) | 16Ω, 8Ω | Sound Pressure Level | 88dB (1W, 1m) | Frequency Response | 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: 10cm cone- type | Speaker Component | Low frequency: 10cm cone- type | Mounting Hole | ø135mm(maximum ceiling thickness: 37mm) | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | Finish Enclosure | n/a | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | Artificial fiber, black | Dimensions | ø155 x 117 (D)mm | Weight | 1kg (including panel) | Accessories Panel | 1 | Ceiling reinforcement ring | n/a | Safety wire | n/a | Paper pattern | 1 | Option Anchor hanging bracket | n/a | Back can | HY- BC1 | Tile bar bridge | n/a | Trim ring | n/a |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low (Adjustable | 16Ω, 8Ω | Sound Pressure Level | 91dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Balanced dome- type | Speaker Component | Low frequency: 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish Enclosure | Steel plate, plating | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 |
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low | (Adjustable) 16Ω, 8Ω | Sound Pressure Leve | 90dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component: High frequency | 12cm cone-type | Speaker Component: Low frequency | 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 | Electronic controller | AC- 120C | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
Reviews
There are no reviews yet.