| Content | REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt, but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology. REVAMP4240T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.
In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 480 watts of output power! The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4240T amplifier. |
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. | The MZ-223 allows multiple audio sources to be mixed, segregated, and routed to 3 independent zones or destinations using familiar volume sliders and assignment buttons. Input signals can be inserted via 5 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs. A total of 10 sets of RCA inputs are provided. Channels 1 and 2 can be set to accommodate phono-level signals for use with a turntable. In addition located conveniently on the front panel, 2 mic-compatible
The independent 3-zone outputs each have a combination of balanced professional XLR or RCA unbalanced configurations for long runs or connection to common residential power amplifiers or speakers. This flexibility, for example, allows music to be routed to ZONE1, ambient noise or natural sounds to ZONE2, a separate music track or a voice announcement can be routed to ZONE3, while the convenient "Talkover” function will automatically lower any mixed channel source so the microphone can be heard while speaking.
- Easy operation and routing via familiar volume sliders, toggle switches/buttons, and knobs
- 3 Independent Zone outputs with stereo XLR balanced and unbalanced RCA connectors per channel
- 5 separate input channels, each with two sets of stereo RCA inputs
- 2 additional mic-compatible XLR inputs on the front panel
- All audio can be mixed or segregated per channel, and routed to the 3 separate Zones/Outputs
- “Talkover” function automatically lowers other source content while microphones are in use
- Independent 3-band EQ per output channel and per microphone input
- Compact 2U rack mount design
|
Power Output Level R-300 PLUS
STEREO
8ohm(T.H.D 0.05%) 170W+170W
4ohm(T.H.D 0.05%) 250W+250W
BRIDGED MONO
8ohm(T.H.D 0.05%) 460W
8ohm(T.H.D 0.5%) 500W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
| User's manual [5,41 MB]
LD Systems zone 423 2-Zone-Mixer
The ZONE 423 is a full featured zone mixer with 4 line and 2 microphone channels, that can be assigned to a master and a zone output, as well as inputs for an external emergency announcement system and remote-controlled switching mute. Through versatile connectivity, the compact 2U rack device is the perfect control centre for PA systems in food outlets, clubs, hotels, fitness centres, and is also excellent for presentations and DJs.
In addition to the two balanced microphone inputs with variable Gain and Talkover level,12V-phantom power, and a shared 3-Band-EQ, the ZONE 423 offers Line, Phono-, and Aux-stereo connections in RCA format, a FOH-input with balanced stereo jack plugs as well as a USB and 3.5mm mini jack. The USB-port is used as a stereo input and output and allows the mixer to be used as an external audio interface. The four input channels have individual gain controls with signal and peak value display, 45 mm faders for adjusting the volume and cue buttons.
The master and zone sections each have their own EQ, balanced XLR and unbalanced RCA outputs: the master output via terminal block connectors and the zone output using a mono sum switch, and 100 Hz high-pass filter. The stereo level indication can be set to master or zone, and the maximum output level can be preset for both on the back of the mixer. In addition to an adjustable headphone connection for pre-listening, the ZONE 423 also has a recording output.
- Type: stereo
- Number of Zones: 2 (Master, Zone)
- Installation Height: 2U
- Total Input Channels: 6 (2x Mic, 1x Line/Aux, 2x Line/Phono, 1x Line/FOH)
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channel Connections: 6.3 mm stereo jack (balanced), XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: Gain, On/Off, 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1 x Talkover Level
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 8 mV
- Microphone Channels THD: 0,07 %
- Line Channels: 4 (Input 1: USB/Line, Input 2 + 3: Line/Phono/CD, Input 4: Line/FOH)
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack + USB, input 2 + 3: 4 x RCA, input 4: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, Source, Cue, Level, Enable FOH
- Line Channel Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 60 kOhm)
- Line Channels Input Sensitivity: 1 V (Phono 10 mV)
- Line Channels THD: 0,03 % (Phono 0,05 %)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 3 (Master - Stereo, Zone - Stereo/Mono, Rec - Stereo)
- Output Connectors Master: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ HI, EQ Mid, EQ Low, Max. Level
- Master Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Master Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Zone Output Connections: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Zone Controls: Level, Source Input 2 - 4/Mix, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Mono
- Zone Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
- Zone Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 1,2 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Connections Additional Inputs: Terminal Block
- Additional Input Controls: Level Emergency Input
- Input Sensitivity Emergency Input: 5 V
- Additional Controls: power switch
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 22 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 483 x 89 x 210 mm
- Accessories Included: terminal blocks, power cable, operating instructions
|
LD Systems ZONE 622 2-Zone Mixer
The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.
The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface.
The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.
Product type
Mixers
Type
Installations
Number of Zones
2 (Master, Zone)
Type
stereo
Installation Height
1 U
Total Input Channels
8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response
20 - 40000 Hz
Microphone channels
2 (with phantom power 12 V)
Microphone Channel Connections
6.3 mm stereo jack (balanced)
Microphone channel controls
1 x EQ Hi , 1 x EQ Low , 1 x Talk Over Damp , 1 x Talk Over Level , Gain , On / Off
Microphone Channels Display Elements
On-LED
Microphone Channels Input Impedance
4 kOhm
Microphone Channels Input Sensitivity
6.1 mV
Microphone Channels THD
0.08%
Line / Microphone Channels
2
Line / microphone input connectors
2 x RCA , 3.5 mm stereo jack (input 1) , 6.3 mm stereo jack (balanced)
Line / microphone channel controls
Cue , level , mic/lline , Trim
Line / Microphone Display Elements
Cue-LED , Signa-LED
Line Channels
3
Line input connectors
Input 3-4: 2 x RCA , Input 5: 2 x RCA + USB
Line Channel Controls
Cue , level , Trim
Line Channel Display Elements
Cue-LED , Signa-LED
Line Channel Input Impedance
4 kOhm
Line Channels Input Sensitivity
1.5 V
Line Channels THD
0.03%
input sensitivity AUX/Line
3 V
FOH Channels
1
FOH Input Connections
6.3 mm stereo jack (2 x balanced)
FOH Input Controls
Cue , level
FOH Input Display Elements
Cue-LED , Signa-LED
Line outputs
3 (Master - Stereo, Zone - Mono, Rec - Stereo)
Output Connectors Master
6.3 mm stereo jack (2 x balanced) , RCA (x2) , terminal block
Master Controls
EQ Hi , EQ Low , level , Max. Level
Master Display Elements
5-Segment Level Meter
Master Output Levels
(balanced) 24 dBu , (unbalanced) 18 dBu
Zone Output Connections
6.3 mm stereo jack (balanced) , terminal block
Zone Controls
EQ Hi , EQ Low , level , Max. Level , Source Input 1-5/Mix
Zone Display Elements
5-Segment Level Meter
Zone Output Levels
24 (balanced/ unbalanced) dBu
Output Connections Rec
2 x RCA
Headphones ouput
1
Headphone Out Port
6.3 mm TRS
Headphone Output Controls
Cue Volume
Headphone Output Voltage
(@ 32 Ohm) 1.25 V
Additional Inputs
2 (Emergency Input, Output Mute)
Connections Additional Inputs
terminal block
Additional Input Controls
Level Emergency Input
Additional Controls
power switch
Additional Display Elements
Power-LED
Operating voltage
220 - 250 V AC, 50 Hz
Mains connector
IEC power connector
Power consumption
18 W
Fuse
T 500 mAL / 250 V
Width
485 mm
Height
44 mm
Depth
179 mm
Weight
2,4 kg
Accessories (included)
Power cord , terminal blocks
|
Reviews
There are no reviews yet.