Content | The SUBLIME is an ultra compact passive 6.5' dual coil subwoofer that offers the ultimate blend of a compact size and deep, fat basses. Thanks to the built-in X-over, this subwoofer is the ideal partner for the MASK2 top speakers.
This thinnest subwoofer on the market (only 12 cm deep) allows for easy integration into any interior: on the wall (mounted with the included wall mounting brackets), behind curtains or even under furniture.Speaker and connection terminals are invisible when mounted on the wall using the included mounting brackets. It may look like a small heating radiator, but instead of heat, it will radiate musical vibes in your room.
The SUBLIME subwoofer has a built-in stereo X-over filter, thus eliminating the need for external filters. The X-over filter separates the high frequencies and sends them directly to the top speakers. Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. | JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
Frequency Range |
: |
31 Hz ? 220 Hz |
Frequency Response |
: |
34 Hz ? 220 Hz |
Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
System Maximum SPL |
: |
130 dB SPL peak |
System Sensitivity |
: |
95 dB SPL |
LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
Nominal Impedance |
: |
8 ohms |
Active Tunings |
: |
Tunings available at www.jblpro.com |
Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
Finish |
: |
Black DuraFlex? finish |
Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
Net Weight |
: |
37 kg (81 lb) |
Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
|
The S8015 is an extremely compact, high output, band-pass subwoofer able to deliver tight and fast controlled bass response.
The new high power high sensitivity 15" woofer is the result of the latest RCF experience in sub-bass transducers and compact subwoofer design and manufacturing.
The band-pass configuration offers a significant acoustic impact resulting in a fast and controlled reproduction of the bass frequency range.
It is capable of a power of 1 kW RMS and able to deliver a MAx SPL in excess of 135 dB.
The cabinet's shape is unobtrusive rectangular low profile to be used under sofa or under limited height stages; the cabinet is constructed of Baltic Birch plywood and finished in a very resistant, textured black paint.
Rubber feet are also installed.
Applications
- Low Frequency Enhancement
- Under-sofa and under-stage constraints
- Music Enhancement
- Club-Bar Bass Enhancement
- Special Effects Reinforcement
- Entertainment Systems
- Live Music Reinforcement
- Small and Mid Club Sound Systems
- Infill Sub Bass Enhancement
- Auditoriums
- AV presentations
- Retail stores
Features |
---|
15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology | Bandpass woofer | 135 dB Max SPL | Response down to 43 Hz | Rectangular box enclosure |
Baltic Birch cabinet finished in a very resistant, textured black paint with rubber feet
Acoustical Specifications |
---|
Frequency Response -10 dB: | 43 Hz | ÷ 0.25 kHz | Max SPL @ 1m: | 135 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1500 | |
TRANSDUCERS |
---|
Woofer: | 15" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 310 / 12.20 mm/inch | | Width: | 900 / 35.43 mm/inch | | Depth: | 380 / 14.96 mm/inch | | Net Weight: | 23.4 / 51.58 Kg/Lbs |
|
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
Acoustical Specifications |
Type Of Speaker: |
“band-pass" subwoofer |
|
Frequency Response: |
70 Hz |
÷ 220 kHz |
Max SPL @ 1m: |
107 dB |
|
Power Handling: |
60 Watt RMS |
|
Peak Power Handling: |
120 Watt PEAK |
|
System Sensitivity: |
89 dB |
|
Impedance: |
16 Ω |
|
Crossover frequencies: |
200 Hz |
|
INPUT SECTION |
Input connector: |
Removable 4 pole Euroblock |
|
Constant voltage: |
100 V, 70 V V |
|
Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
CABINET |
Hardware: |
Material PVC |
|
Colour: |
White / Black |
|
PHYSICAL SPECIFICATIONS |
Height: |
300 / 11.81 |
|
Width: |
203 / 7.99 |
|
Depth: |
400 / 15.74 |
|
Net Weight: |
8.06 / 17.76 |
|
SHIPPING INFORMATION |
Package height: |
370 / 14.56 |
|
Package width: |
265 / 10.43 |
|
Package depth: |
470 / 18.50 |
|
Shipping Weight: |
9.24 / 20.59 |
|
The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker. The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 720 W | Rated Impedance | 8 Ω | Sensitivity | 95 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when using DP-0206 (option)) | Crossover Frequency | 80 Hz (when using DP-0206 (option)) | Speaker Component | 46 cm cone-type | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, paint
Front grille: Punched steel plate, black, acrylic paint | Dimensions | 740 (W) × 573 (H) × 698 (D) mm | Weight | 66 kg (including accessories) | Accessory | Joint plate …2, Joint plate mounting bolt (M10) …16 | Option | Rigging frame: SR-RF12
Digital processor: DP-0206 |
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
Reviews
There are no reviews yet.