ART EQ341 DUAL 15 BAND EQUALIZER

ART?s 341 Dual Channel 15 band 2/3 octave graphic equalizer features: constant Q circuitry
with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range
of 6dB or 12dB, active balanced and unbalanced input and output connect-ions, variable input
level control, clip level indicators, ground lift switch, internal power supply and selectable line
voltage switch. A range control switch is provided allowing you to set the maximum boost or
cut for each band of equalization to either 6dB or 12dB. Each channel has its own bypass switch
with LED indicator. The rugged, all-steel constructed chassis occupies 1U rack space and is
intended for installation in standard 19" equipment racks.
Multiple input and output configurations are provided for ease of use and incorporate paralleled
connections. The XLR and 1/4" TRS connectors use active balanced, low noise circuitry. XLR
connections are: Pin 1 = ground, Pin 2 = Hot (+), and Pin 3 = Cold (-). The 1/4" TRS connections
are: Tip = Hot (+), Ring =Cold (-), and Sleeve = ground. Both the XLR and 1/4" connectors may
be used in an unbalanced configuration. The RCA jacks are unbalanced. The 341 is designed to
work with a variety of signal levels. The input level control covers a wide range and can easily
accommodate -10 and +4 signal levels. A clip LED will light when a signal level of 5dB before
clipping occurs.
The 341 may be used in a variety of applications such as live sound, recording studios, instrument
racks as well as any conventional fixed installation environment. Use the 341 equalizer wherever
modification of the frequency contour of a sound is needed. The 341 graphic equalizer is a powerful
tool for solving a number of audio problems and creating interesting sound textures. Patch the EQ
between your mixing console and power amps to allow you to alter the overall mix to better match
your environment. Use the 341 between your monitor mixer and monitor power amps to aid in the
removal of feedback inducing frequencies. Patch into a channel insert to EQ one channel or track
individually. Run your instrument directly into the equalizer to enhance its sound before reaching a
power amplifier or instrument amplifier. Patch the 341 into the effects loop of an instrument amplifier
or between a preamp and power amp to have precise control over the complete sound.
The 341 Dual 15 Band Eq has the features and performance you need for any of your audio applications
requiring equalization. For the latest in equalizer technology today, check out the 341 at your favorite
A R T dealer.

341 - Dual 15 band EQ Features:

Dual Channel 15-Band Graphic Equalizer
Constant-Q Filtering
Balanced XLR, Active Balanced 1/4“, and Unbalanced RCA Input and Output Connectors
+/- 6dB or +/-12dB Level Adjustments
20mm Center Detented Frequency Band Sliders
Independent Level and Bypass Controls Per Channel
Designed for Years of continuous, reliable performance
Rugged All Steel Construction
One Year Warranty

iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?

With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.

  
? Advanced Feedback Suppression (AFS?)

? Type V? Noise Reduction

? PeakStopPlus? Limiting

? 2/3-octave Constant Q frequency bands

? Switchable boost/cut ranges of ±6 or ±15dB

? 18 dB per octave 40Hz low-cut filter

? ±12dB input gain range

? XLR, TRS and Euroblock Inputs and Outputs

? Internal Toroidal Transformer

? Frequency Response of 10Hz to 22kHz

? Dynamic range of greater than 113dB

? User Power Up Features

? Relay Bypass for Power Failure System Protection

• Professional 15-band stereo graphic equalizer for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
• Ultra-low noise 4580 operational amplifiers for highest signal integrity
• Dedicated mono subwoofer output with adjustable crossover frequency
• Additional low-cut filter removes unwanted frequencies, e.g. floor rumble

• Highly accurate 4-segment LED output metering and input gain controls for easy level setting
• Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
• “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• 3-Year Warranty Program*
• Designed and engineered in Germany

Digital stereo active crossover with 4 inputs and 8 outputs, incl. software .

• Flexible routing configurations for all standard mono and stereo output operating modes
• 4 analog inputs and 8 analog outputs (XLR)
• Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
• Incl. software editor (for PC and Mac) for remote control via computer through USB interface: store, transfer, and manage your presets
• Up to 30 user presets storable in the device via software
• 5 menu languages selectable (German, English, French, Spanish, Dutch)
• Alphanumeric LCD screen with 2 lines of 16 characters each
• Input sensitivity digitally adjustable
• Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
• Mute switch with LED indicator per output
• 7-band parametric EQ per output
• Up to 7 ms signal delay adjustable for the outputs
• Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
• Switchable phase
• Lock function for prevents undesired changes to settings
• Rack installation, 1 U
• Windows XP, Vista, 7, 10 and Mac OS X 10.5.8 and better
• Digital signal processor
• The device can be connected via USB to the PC in connection with DXO Software The firmware can be updated via the PC connection
• (19") 48.3 cm rack installation 1 U

1215 Dual 15-Band Graphic Equalizer

The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.

•   Switchable boost/cut ranges of ±6 or ±15 dB
•   Electronically balanced/unbalanced inputs
•   Servo balanced/unbalanced inputs
•   RF filtered inputs and outputs
•  XLR, Barrier Strip, and 1/4" TRS connectors
•  -12dB/+12dB input gain range
•  18dB/octave 40Hz Bessel low-cut filter
•  Chassis/signal ground lift capability
•  Internal power supply transformer
•  Power-off hardwire relay bypass with 2-second power-up delay