ART HEADTAP HEADPHONE MONITOR

Discontinued

44.74 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
HeadTAP – Headphone Tap Overview Sometimes floor monitors are a problem. There isn?t enough room for them onstage or someone sits in and can?t hear the monitors or the drummer can?t hear them well enough. Or perhaps it?s a pick-up gig or a rehearsal and you didn?t have enough time to set them up. In […]

 

Read more

HeadTAP – Headphone Tap Overview

Sometimes floor monitors are a problem. There isn?t enough room for them onstage
or someone sits in and can?t hear the monitors or the drummer can?t hear them well
enough. Or perhaps it?s a pick-up gig or a rehearsal and you didn?t have enough time
to set them up. In any case, sometimes it would be preferable just to put on headphones
and somehow connect them to the PA. That?s where a headphone tap comes in. This
is a passive device with an input to connect the PA or monitor amplifier and an output
to connect the headphones. A volume control regulates the headphone level and internal
resistors keep the unit?s impedance high enough to protect the headphones. It also
protects the amplifier from encountering too low a load impedance while powering tap
units, the speaker system or several tap units by themselves. The HeadTAP will also
work with a stereo headphone amplifier for use in recording situations when you want
to add headphones for additional performers.

HeadTAP – Headphone Tap Specifications:

Input Level Stereo/mono input selector button
Power Requirements Passive
Output Jack Dual 1/4 in stereo/mono headphone jacks
Instrument Input Dual parallel 1/4? stereo/mono input jacks
Dimensions 3.75×2.875×1.5 inches (95mm x 74mm x 40mm)
Weight 0.7lb (317g)

Weight 0.31 kg

Reviews

There are no reviews yet.

Be the first to review “ART HEADTAP HEADPHONE MONITOR”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART HEADTAP HEADPHONE MONITOR removeVOX AMPLUG-LEAD Guitar Headphone Amp removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeVOX AMPLUG TWIN Guitar Headphone Amp removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
NameART HEADTAP HEADPHONE MONITOR removeVOX AMPLUG-LEAD Guitar Headphone Amp removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeVOX AMPLUG TWIN Guitar Headphone Amp removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
Image
SKUHEADTAPVOX AMPLUG-LEADVM-50HVOX AMPLUG TWINHP4 EUE005310
Rating
Price 44.74 incl. GR VAT 36.00 incl. GR VAT 264.66 incl. GR VAT 30.51 incl. GR VAT 138.87 incl. GR VAT 31.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

In stock

Available on backorder

In stock

AvailabilityOut of stockIn stockAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

HeadTAP - Headphone Tap Overview

Sometimes floor monitors are a problem. There isn?t enough room for them onstage
or someone sits in and can?t hear the monitors or the drummer can?t hear them well
enough. Or perhaps it?s a pick-up gig or a rehearsal and you didn?t have enough time
to set them up. In any case, sometimes it would be preferable just to put on headphones
and somehow connect them to the PA. That?s where a headphone tap comes in. This
is a passive device with an input to connect the PA or monitor amplifier and an output
to connect the headphones. A volume control regulates the headphone level and internal
resistors keep the unit?s impedance high enough to protect the headphones. It also
protects the amplifier from encountering too low a load impedance while powering tap
units, the speaker system or several tap units by themselves. The HeadTAP will also
work with a stereo headphone amplifier for use in recording situations when you want
to add headphones for additional performers.

HeadTAP - Headphone Tap Specifications:

Input Level Stereo/mono input selector button
Power Requirements Passive
Output Jack Dual 1/4 in stereo/mono headphone jacks
Instrument Input Dual parallel 1/4? stereo/mono input jacks
Dimensions 3.75x2.875x1.5 inches (95mm x 74mm x 40mm)
Weight 0.7lb (317g)

Plug In, Rock Out!

The headphone guitar amp that lets you enjoy serious guitar sound, fast.
Jamming late at night? Donʼt want to wake the neighbors? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime.

The amPlug series received wide-ranging acclaim from guitarists around the world for delivering incredible guitar tone in a pocket-sized unit.

The NEW amPlug 'Acoustic' quickly creates shimmering, rich acoustic guitar sounds. Two distinct sounds are available using the Fat/ Bright switch. The Blend combines the acoustic tone with the original signal for just the right mix! In combination with electric guitar's own tone controls and pickup selection, the sound variation is unlimited. The ultra-long battery life provides up to 27 hours of extended enjoyment! At home, in the studio and on the go, amPlug Acoustic delivers superb acoustic guitar sounds anytime, anyplace.

'Lead' is based on a US-made high-gain boutique amp, further modified for lead guitar. It also contains a digital delay effect, delivering a huge, spatial sound that could not be previously obtained, and giving you a rich and full-fledged lead sound that you can play anytime and anywhere.

'Bass' is modeled on VOX's classic AC100 bass amp, and expands its potential with a full-range tone that supports today's bass sounds. A compressor/boost effect provides not just compression but also a thick overdrive sound, giving you the perfect tones for performing in any style. Careful attention has been paid to the sound quality, and a high-quality FET buffer circuit has been used to obtain even greater dynamic range.

The oringial models are still available in three different sound styles: VOX AC30, Classic Rock, based on a UK-made amplifier head, and Metal, based on a California-made high-gain amplifier head. Even with its ultra-compact size, amPlug perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube, as well as the powerful high gain produced by a large amp stack. Using all new analog modeling technology, amPlug delivers full-fledged amp sound.

  • Plugs directly into your guitar/ bass —a great-sounding headphone guitar amp that gives you serious sound fast.
  • Now available in six styles: Lead, Bass, VOX AC30, Classic Rock, Metal and Acoustic.
  • AUX in jack lets you jam along with your CD/MP3 player.
  • 100% analog circuit faithfully simulates the response of the original amps.
  • 'Lead' delivers hi-gain lead guitar sounds, plus a digital delay effect.
  • 'Bass' features a full-range bass sound with a compressor/boost effect.
  • AC30 emulates the AC30 top boost sound of a vintage VOX AC30.
  • Classic Rock gives you the great high-gain sound of a UK-made 100W amp.
  • Metal delivers the explosive roar of US high-gain metal sound.
  • 'Acoustic' features Fat/Bright switch which offers two types of acoustic sounds.
  • 'Acoustic' also features blend control which mixes the acoustic tones with your original signal for just the right mix.
  • Up to 15 hours of battery life with two Alkaline AAA batteries.
  • Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound.

With its completely analog design, great care was also taken with amPlug's gain circuitry. The 'AC30' uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. 'Classic Rock' uses four classical gain circuits to deliver that great sound. 'Metal' uses two stages of ultra-high gain plus a mid-cut circuit, giving you modern metal high-gain sound anywhere and anytime. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced.

amPlug can be used in numerous ways
With up to twenty seven hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.

amPlug is your fastest ticket to great tone – anytime, anywhere!

VOX amPlug Specificaitons
  • Power supply: two AAA batteries
  • Battery life: with alkaline batteries: approximately 27 hours (with zinc-carbon batteries: approximately 10 hours.)
  • Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39" x 3.15" x 1.22"
  • Weight: 40g /1.41oz. (not including batteries).
  • Included items: two AAA zinc-carbon batteries

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.

The amPlug Twin rolls back the years to capture the sound of the legendary clean American dual speaker combo tube amp. Noted for its sparkling and sustained clean sound, this amp has been is widely used in many genres - rock, blues, jazz, country, and more. Raising the gain provides a powerful American tube overdrive sound. A stereo chorus effect is built into the amPlug Twin, adding natural spaciousness and depth to the sound. As you play these sounds, you're sure to forget the passage of time, and lose yourself in the tones loved by musicians in styles such as jazz, country, and blues.
Specifications

  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Twin (FX on):
  • With zinc-carbon batteries: approximately 3 hours
  • With alkaline batteries: approximately 11 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)
The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price. Features ? Four High Power Headphone Outputs ? Ultra loud (150mW per channel) ? Ultra quiet operation ? Musical Wide Dynamic Range ? Control Room Monitor Outputs with Level Control ? Mono or Stereo Operation ? Monitor Mute Switch ? Daisy Chain an Infinite Number of Units ? Compact package Technical Specifications Input TRS Impedance 10K Ohms Panel Controls Headphone Level 1 to 12 Monitor / Feed Output -80dB to +10dB Mono Switch Monitor / Feed Mute Power Supply Type Linear Input 16VAC/1000mA Output TRS Balanced 51 Ohms Impedance Performance THD+Noise (Unweighted) 0.002% Noise Floor  -98dB Signal To Noise >95dB Power Supply Rejection >98dB Power 16 Watts Physical Weight  5lbs./ 2.3 kg. Dimensions 5.5 x 5.5 x 1.75 Mounting Max Rack and Universal Rack Tray Chassis Steel Panel Brushed Aluminum Sides Cast Aluminum
  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
  • DC 12 Vadapter included
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
Weight0.31 kg0.40 kg0.68 kg0.40 kg2.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.31 kg
Weight 0.40 kg
Weight 0.68 kg
Weight 0.40 kg
Weight 2.00 kg
Weight 0.30 kg