Content |
Phantom II - Two Channel 12V/48 Phantom Power Overview
Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough rule-of-thumb would be ?more is better.? For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48 Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance with 48 Volts of Phantom Power. For all the above, check out the Phantom II. Phantom II - Two Channel 12V/48 Phantom Power Specifications:
Input Connectors 2 x XLR female Output Connectors 2 x XLR male Adapter 12V DC Battery 2 x 9V Power Two 9V batteries (included) or an AC adapter. Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm) Weight 1.5lb (680g) |
- 12 V / 48 V switchable
- 2 XLR inputs
- 2 XLR outputs
- Operating voltage: 12 V / 150 mA (via enclosed power supply unit) or 2x 9 V batteries
- Dimensions: 143 x 93 x 45 mm
- Weight: 485 g
| PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box |
The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. The stereo design features XLR inputs and outputs with a choice of 48V and 12V operation. The SB-48 is powered by a single 15VDC 400 milliamp supply that is included. The connector may be locked into place using a retention clamp. As with all Radial products, the SB-48 is manufactured in Canada from solid steel and powder coated for years of great looks! |
Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20mA totally. LED control. Metal casing 110x110x45mm |
The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
FEATURES:
2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included
|
Reviews
There are no reviews yet.