Content |
Phantom II - Two Channel 12V/48 Phantom Power Overview
Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough rule-of-thumb would be ?more is better.? For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48 Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance with 48 Volts of Phantom Power. For all the above, check out the Phantom II. Phantom II - Two Channel 12V/48 Phantom Power Specifications:
Input Connectors 2 x XLR female Output Connectors 2 x XLR male Adapter 12V DC Battery 2 x 9V Power Two 9V batteries (included) or an AC adapter. Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm) Weight 1.5lb (680g) | Alctron PS200 Portable 48V Phantom Power Supply for Condenser Microphone Live Broadcast Mic Power Supply
The PS200 is portable, battery-operated, and designed to provide 48V phantom power to any condenser microphone in remote locations
It also features a DC power loop enabling multiple unit operations
Power condenser microphones requiring phantom power
Operates on two 9 Volt alkaline batteries, or the included 9V DC adapter
High-frequency switching power supply to eliminate noise
Utilizes a switching regulator for stable voltage performance
Battery life approx. 10 hours, using one 9V alkaline battery
Package Included:
1 x Power Supply(microphone and battery are not included) | PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box |
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
|
- Universal phantom power supply for any condenser microphone
- Selectable +12 / +48 V power supply
- Ultra-low noise audio performance
- DC 12 V adapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
Studio-grade condenser microphones really sound great for capturing vocals, drums and other acoustic instruments, but what if your mixer doesnʼt provide the phantom power you need to make them work their magic! The ultra-compact MICROPOWER PS400 can solve all of that, and it's small enough to fit in your pocket – with a price tag to match!
The PS400 features XLR Thru jacks and provides superb noise-free operation. Just connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. You can toggle between +12 V and +48 V power, depending on the operating voltage your mic prefers. This handy, little audio solution comes with its own 12 V DC power supply and an LED, to let you know when itʼs own on.
With its small size and even smaller price tag, the MICROPOWER PS400 is the perfect solution for on-the-go +12 or +48 V phantom power. See how it complements your favorite mic and mixer at your nearest BEHRINGER dealer, or get yours online today! |
Shure RK-183 Phantom Preamplifier for MX183-184-185 |
Reviews
There are no reviews yet.