| Content |
Phantom II - Two Channel 12V/48 Phantom Power Overview
Condenser microphones usually specify different requirements for their phantom power.
These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s
a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough
rule-of-thumb would be ?more is better.?
For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom
Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48
Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven
by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance
with 48 Volts of Phantom Power. For all the above, check out the Phantom II.
Phantom II - Two Channel 12V/48 Phantom Power Specifications:
Input Connectors 2 x XLR female
Output Connectors 2 x XLR male
Adapter 12V DC
Battery 2 x 9V
Power Two 9V batteries (included) or an AC adapter.
Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm)
Weight 1.5lb (680g)
| The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector | PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC，2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box |
Shure RK-183 Phantom Preamplifier for MX183-184-185 |
48 V Phantom Power Supply
With XLR input and output
Transparent, quiet operation
Powered via power supply unit (included) or optional 9V battery
Displays power and battery status
|
PHP20 is a 2 channel Phantom supply for condenser microphones or other equipment,
with the possibility to change output voltage from 12Vcc to 48 Vcc.
SPECIFICATIONS:
Input: 2 female Cannons
Output: 2 male Cannons (+2 back links)
Output voltage: 12/48Vcc.
Controls: ON led. 2 switches 12/48 Vcc
Power: 9Volt batteries
Ac/dc adapter 12 Vcc
Dimension: 130 (W) 105 (D) 85 (H) mm
|
Reviews
There are no reviews yet.