| Content |
Phantom II - Two Channel 12V/48 Phantom Power Overview
Condenser microphones usually specify different requirements for their phantom power.
These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s
a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough
rule-of-thumb would be ?more is better.?
For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom
Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48
Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven
by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance
with 48 Volts of Phantom Power. For all the above, check out the Phantom II.
Phantom II - Two Channel 12V/48 Phantom Power Specifications:
Input Connectors 2 x XLR female
Output Connectors 2 x XLR male
Adapter 12V DC
Battery 2 x 9V
Power Two 9V batteries (included) or an AC adapter.
Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm)
Weight 1.5lb (680g)
|
- 12 V / 48 V switchable
- 2 XLR inputs
- 2 XLR outputs
- Operating voltage: 12 V / 150 mA (via enclosed power supply unit) or 2x 9 V batteries
- Dimensions: 143 x 93 x 45 mm
- Weight: 485 g
| PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC，2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box | Phantom Power Adapter 48V
Mini XLR Male 3 pins > XLR male
Type
Phantom power adapter
Input connector
Mini-XLR (3-pin)
Gender of input connector
male
Output connector
XLR (3-pin)
Gender of output connector
male
| The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector |
- Universal phantom power supply for any condenser microphone
- Selectable +12 / +48 V power supply
- Ultra-low noise audio performance
- DC 12 V adapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
Studio-grade condenser microphones really sound great for capturing vocals, drums and other acoustic instruments, but what if your mixer doesnʼt provide the phantom power you need to make them work their magic! The ultra-compact MICROPOWER PS400 can solve all of that, and it's small enough to fit in your pocket – with a price tag to match!
The PS400 features XLR Thru jacks and provides superb noise-free operation. Just connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. You can toggle between +12 V and +48 V power, depending on the operating voltage your mic prefers. This handy, little audio solution comes with its own 12 V DC power supply and an LED, to let you know when itʼs own on.
With its small size and even smaller price tag, the MICROPOWER PS400 is the perfect solution for on-the-go +12 or +48 V phantom power. See how it complements your favorite mic and mixer at your nearest BEHRINGER dealer, or get yours online today! |
Reviews
There are no reviews yet.