ART PHANTOM II TWO CHANNEL 12V-48 PHANTOM POWER

Discontinued

58.17 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Phantom II – Two Channel 12V/48 Phantom Power Overview Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough rule-of-thumb would be ?more is […]

 

Read more

Phantom II – Two Channel 12V/48 Phantom Power Overview

Condenser microphones usually specify different requirements for their phantom power.
These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s
a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough
rule-of-thumb would be ?more is better.?
For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom
Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48
Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven
by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance
with 48 Volts of Phantom Power. For all the above, check out the Phantom II.
 
Phantom II – Two Channel 12V/48 Phantom Power Specifications:

Input Connectors 2 x XLR female
Output Connectors 2 x XLR male
Adapter 12V DC
Battery 2 x 9V
Power Two 9V batteries (included) or an AC adapter.
Dimensions 5.625×1.75×3.625 inches (144mm x 45mm x 92mm)
Weight 1.5lb (680g)
 

Weight 0.68 kg

Reviews

There are no reviews yet.

Be the first to review “ART PHANTOM II TWO CHANNEL 12V-48 PHANTOM POWER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART PHANTOM II TWO CHANNEL 12V-48 PHANTOM POWER removeAUDAC AUAPT20 Phantom Power Supply removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeSAMSON S-PHANTOM 48 VOLT PHANTOM POWER SUPPLY removeBESPECO PHP20 - PHANTOM POWER FEEDER removeSUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male remove
NameART PHANTOM II TWO CHANNEL 12V-48 PHANTOM POWER removeAUDAC AUAPT20 Phantom Power Supply removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeSAMSON S-PHANTOM 48 VOLT PHANTOM POWER SUPPLY removeBESPECO PHP20 - PHANTOM POWER FEEDER removeSUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male remove
Image
SKUPHANTOM IIAUAPT20H10SE00026S PHANTOMPHP20PS418D
Rating
Price 58.17 incl. GR VAT 88.04 incl. GR VAT 185.00 incl. GR VAT 89.00 incl. GR VAT 97.20 incl. GR VAT37.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

In stock

Available on backorder

In stock

AvailabilityOut of stockIn stockIn stockIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Phantom II - Two Channel 12V/48 Phantom Power Overview

Condenser microphones usually specify different requirements for their phantom power.
These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s
a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough
rule-of-thumb would be ?more is better.?
For example, a 24-volt condenser mic usually works perfectly with a 48 Volt Phantom
Power Suppy. Some mics rated at as little as 9 Volts can operate on voltages up to 48
Volts (check with the manufacturer first). Conversely, a mic will generally perform best driven
by not less than its rated voltage. So, for a 48 Volt mic, you would get best performance
with 48 Volts of Phantom Power. For all the above, check out the Phantom II.
 
Phantom II - Two Channel 12V/48 Phantom Power Specifications:

Input Connectors 2 x XLR female
Output Connectors 2 x XLR male
Adapter 12V DC
Battery 2 x 9V
Power Two 9V batteries (included) or an AC adapter.
Dimensions 5.625x1.75x3.625 inches (144mm x 45mm x 92mm)
Weight 1.5lb (680g)
 

The APT20 is a phantom power supply unit for use with two condenser microphones. It supplies 48 V DC to the microphones and routes the signal to a mixer or microphone amplifier. It features XLR connections for in- and output, and at the back is an euro power connection with power switch provided.


The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.

Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case

Technical Data
Nominal impedance  200 Ohm, symm. 
Min. terminating impedance  1000 Ohm 
Output voltage  2 V (1 kHz) 
Power supply  Phantom 12 - 48 V 
Current consumption  2,2 mA 
Dimensions  d 22 x 52 mm (netto) 
Gain  0 dB 

The S-phantom gives you an in the field, on location solution for powering
your condenser microphones that need 48 volt power
 
FEATURES:

2 Channel 48 Volt phantom power supply
2 Balanced XLR mic inputs
2 Balanced XLR and 1/4? mic outputs
AC adapter included 

 

PHP20 is a 2 channel Phantom supply for condenser microphones or other equipment,
with the possibility to change output voltage from 12Vcc to 48 Vcc.

SPECIFICATIONS:
Input: 2 female Cannons
Output: 2 male Cannons (+2 back links)
Output voltage: 12/48Vcc.
Controls: ON led. 2 switches 12/48 Vcc
Power: 9Volt batteries
Ac/dc adapter 12 Vcc
Dimension: 130 (W) 105 (D) 85 (H) mm

PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89") Weight: 245 g
Packaging: white box
Weight0.68 kg0.80 kg0.50 kg0.41 kg1.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.68 kg
Weight 0.80 kg
Weight 0.50 kg
Weight 0.41 kg
Weight 1.50 kg
Weight 1.00 kg