| Content |
PowerMIX I - Four Channel Personal Mono Mixer Overview
There are occasions when a number of mono sources or a stereo source and/or
instruments need to be mixed down into a mono signal. This might be a matter
of inserting one or two keyboards plus a stereo tape or CD track into one mixer
channel for PA or recording purposes or simply into an instrument amp or powered
speaker. There can also be the need to mix the line outputs of two or more instrument
amps into one mixer channel. Up to 4 high impedance mics can be mixed this way.
(ie: Karaoke applications.) High impedance mics and electric instruments can be
mixed this way for small band rehersals. Two high-impedance mics and a stereo
CD or tape can be mixed down. And if the mixer is passive, no AC power source
is required.
PowerMIX I - Four Channel Personal Mono Mixer Specifications:
Input Impedance 47k ohms
Output Impedance 12k ohms
Power Passive
Dimensions 3.75x2.75x1.5 inches (90mm x 70mm x 40mm)
Weight 0.7 lbs. (317g) | Behringer Micromix MX-400 Ultra Low-Noise 4-Channel Line Mixer
Despite its ultra-compact size, this 4-channel line mixer is big on features! It yields the highest sonic quality at all output levels, boasting ultra low-noise 4580 operational amplifiers for outstanding audio performance?the same op amps found in its much bigger brethren. Expanding on the capabilities of standard-size mixers is where the MX400 does extremely well, for example as a sub-mixer. If you are running short on available channels on your ?big? mixer and need to bring the output of three different keyboards into your mix, you can simply connect them to the MX400, work out the keyboard mix, and connect the MX400?s output to a single input on your main mixer.
It will catch your eye because it?s cute as a button, but you?ll want to own one because of what it can do for your performance.
- Compact 4-channel line mixer
- Separate volume control for each channel
- Low noise 4580 operational amplifier
- 4x 6.3 mm Mono jack inputs
- 1x 6.3 mm Mono jack outputs
- Includes 12-Volt power supply
- Dimensions: 46.5 x 57.2 x 103.6 mm
- Weight: 190 g
| Rane Commercial SM26S Six-Channel Rackmountable Splitter/Mixer
Rane Commercial SM 26S Overview
The Rane SM26S is a unique, dual purpose mixer capable of mixing audio signals and distributing audio via any of the 6 outputs. There are 6 balanced mono inputs and outputs complete with gain and pan control. Pan controls place the channel's signal into the stereo field. As a splitter, the Pan controls assign which output channels distribute incoming signal. There is a separate Left and Right stereo input for incoming signals when using the SM26S as a splitter mixer. Also featured are stereo (Left/Right)"Expand" Output for cascading multiple SM26S. There is no maximum limit as to how many SM26S can be linked.
The Rane SM26S is capable of mixing and distributing signals out of 6 mono outputs. There are 6 mono inputs and 6 mono outputs, 2 sets of stereo (L/R) outputs and a set of stereo (L/R) inputs. Both a mixer and audio distributer, the Rane SM26S is flexible and versatile enough for any sound reinforcement application.
The SM26S features balanced 1/4" TRS phone inputs and outputs for maximum gain and lower noise floor.
PAN pots are featured on channels 1-6 and control stereo placement of audio when the SM26S mono inputs are in use. As a splitter, the PAN control may be used to assign which outputs distribute the incoming stereo signal.
The external power supply is effective in reducing noise created by "dirty" AC power and bad grounds.
| Total # Of Inputs |
8 - Active Balanced 1/4 TRS" Phone Inputs:
Mono channels 1-6
Stereo Input (Left/Right) |
| Output |
8 - Active Balanced TRS 1/4" TRS Phone Outputs:
Mono channels 1-6
Mix Output (Left/Right)
Expand Out:
Stereo Output (Left/Right) |
| Monitor/Headphone Out |
No |
| Impedance |
Inputs: 20 kOhms
Outputs: 200 Ohms |
| Gain |
Overall Gain Range - Off to +12 any input to any output |
| THD & Noise |
0.006 limit = .002% +4dBu, 20-20kHz unity gain |
| Frequency Response |
10Hz - 56kHz +0/-3 dB |
| Metering |
No |
| Controls |
Rotary Pots:
Channel Gain (ch 1-6)
Mix/Pan (ch 1-6)
Master Output
Master Input
Power Switch |
| Phantom Power |
No |
| Power |
18-24VAC w/center tap 300mA Max Current |
| Dimensions |
1.75 x 19 x 5.3" (4.4 x 48.3 x 13.5cm) |
| Weight |
9lbs (4.1kg) |
|
• no power-supply needed
• stereo in- and outputs
• 4-in, 1out mixer
• 1-in, 4out splitter
The PMM-401 is a four channel passive mixer for expanding a mixer with extra line signals. It requires no batteries or other power source. The unit can be used as a 1-in 4-out box then all controls are turned completely clockwise. It is a use full tool that will help you at unforeseen situations.
The DAP Pro Audio Solutions are a complete line-up of audio tools for the professional musician or audio engineer. It is a series of audio modifying tools like mini-mixers, pre-amps and converters available in active or passive models. All audio solutions are designed to meet the highest stage and audio demands and feature a metal road proof housing with rubber feet and easy accessible controls. The units also have a small footprint which make them ideal to be used and placed in any environment where space is critical.
Specifications Frequency Response: 20Hz-20KHz
Inputs: 6,3 TRS Jack,
Outputs: 6,3 TRS Jack
Input Impedance: 1Meg
Input Impedance: 50 kOhm
Output Impedance: 12 KOhm
Dimensions: 53 x 158 x 135 mm (HxWxD)
Weight: 0,67 Kg
|
Ultra-flexible and easy-to-use zone mixer with remote control ports for commercial sound systems and fixed installation applications
6 ultra-low noise Mic/Line inputs with Gain control, -20 dB Pad, Level/Clip indicator, +48 V phantom power and bus-assign switches
2 selectable high-headroom stereo inputs with mono/stereo switch
Channel 1 provides variable threshold to enable automatic bus mute for announcements, etc.
3 assignable outputs (Left, Right and Aux) with individual Master controls and 5-segment LED meters
Ultra-musical 4-band master EQ and global microphone low-cut filter for perfect sound adjustment
Left, Right, Aux and Mute bus links available including Master/Slave switch for connecting multiple units
Remote master Left/Right level control port for ultimate flexibility
Select switch for routing microphone bus post remote control
Integrated channel muting system with Priority select
All inputs/outputs on Euro-type connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
| Mini audio mixer
4 channel ( 4xIN 1xOUT )
* 4xIN Jack 6,3mm to 1xOUT Jack 6,3mm
* Power supply included
- 4x 6.3 mm Mono jack inputs
- 1x 6.3 mm Mono jack outputs
|
Reviews
There are no reviews yet.