| Content | 548DE Original Tonar Replacement stylus 548-DE, D-680, 681EE for Stanton , turntables and more.
High Quality Elliptical needle made by TONAR for L-727, L-737, and L-747 families of cartridges.
Specs:
Elliptical Diamond Tip needle 0.2 x 0.7 mil Super High polish
Tracking Force: 0.75 - 1.75 grams ( with brush : 1.75 - 2.5gr Recomended 2.0gr )
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: Black
Suitable for
680 EE
681 EE
681 EEE
681 EEE/S
680 EL
681 SE
737 E
D 680
D 680 E
D 6800 EE
D 6800 EEE
D 6800 EEE/S
D 6800 EL
D 6800 SE
D 6810
4D-Q
D 73..
|
This replacement stylus is designed for playback on coded vinyl. It has a superior tracking ability and causes low record wear. It is a spherical stylus with an output of 8.0 mV. |
Stylus 40
| Technical data |
| | Frequency range | 20-30.000 Hz | | Frequency response | 20-30.000 Hz + 2 / - 3 dB | | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | | Compliance, dynamic, lateral | 25 µm/mN | | Stylus type | Nude FG 70 | | Stylus tip radius | r/R 5/70 µm | | Equivalent stylus tip mass | 0,3 mg | | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | | Tracking force, recommended | 1,5 g (15 mN) | | Tracking angle | 20° | | Stylus colour | Black |
| | | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value | Ortofon 320 Stylus Technical Data
- Frequency range 20-22.000 Hz
- Frequency response 20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force 70 µm
- Compliance, dynamic, lateral 25 µm/mN
- Stylus type Nude Fine Line
- Stylus tip radius r/R 8/40 µm
- Equivalent stylus tip mass 0,5 mg
- Tracking force range 1,25-17,5 g (12,5-17,5 mN)
- Tracking force, recommended 1,5 g (15 mN)
- Tracking angle 20°
- Stylus colour Grey
- Recommended for following cartridges Series 320 Universal
|
|
Stylus 3E
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz + 2 / - 3 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,5-2,0 g (15-20 mN) |
| Tracking force, recommended |
1,75 g (17,5 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value
| DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Reviews
There are no reviews yet.